BMC/Intel-BMC/linux.git/include/uapi/linux/virtio_ids.h, branch dev-5.14-intel

virtio: update virtio id table, add transitional ids

2021-07-03T08:50:51+00:00

This commit updates virtio id table by adding transitional device ids Signed-off-by: Zhu Lingshan Link: https://lore.kernel.org/r/20210510081015.4212-2-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin

Bluetooth: Fix VIRTIO_ID_BT assigned number

2021-06-03T21:01:55+00:00

It turned out that the VIRTIO_ID_* are not assigned in the virtio_ids.h file in the upstream kernel. Picking the next free one was wrong and there is a process that has been followed now. See https://github.com/oasis-tcs/virtio-spec/issues/108 for details. Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver") Signed-off-by: Marcel Holtmann Signed-off-by: Luiz Augusto von Dentz

Merge tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2021-04-30T19:48:14+00:00

Pull sound updates from Takashi Iwai: "No surprises in this development cycle, and most of work is about the fixes and the improvements of the existing code, while a new LED control layer and a few new drivers have been introduced. Here are some highlights: Core: - A common mute-LED framework was introduced. It is used by HD-audio for now, more adaption will follow later. The former "Mic Mute-LED Mode" mixer control has been replaced with the corresponding sysfs now. - User-control management was changed to count consumed bytes instead of capping by number of elements; this will allow more controls in the normal usage pattern while avoiding the possible memory exhaustion DoS ASoC: - Continued refactoring and cleanups in ASoC core and generic card drivers - Wide range of small cppcheck and warning fixes - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358 accessory detection, and Realtek RT1019, RT1316, RT711 and RT715 USB-audio: - Continued improvements and fixes of the implicit feedback mode, including better support for Pioneer and Roland/BOSS devices HD-audio: - Default back to non-buffer preallocation on x86 - Cirrus codec improvements, more quirks for Realtek codecs Others: - New virtio sound driver - FireWire Bebob updates" * tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits) ALSA: hda/conexant: Re-order CX5066 quirk table entries ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices ALSA: hda/realtek: Re-order ALC662 quirk table entries ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries ALSA: hda/realtek: Re-order ALC269 HP quirk table entries ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries ALSA: usb-audio: Remove redundant assignment to len ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx ALSA: virtio: fix kernel-doc ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB ALSA: sb: Fix two use after free in snd_sb_qsound_build ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer ...

Bluetooth: Add support for virtio transport driver

2021-04-08T10:26:34+00:00

This adds support for Bluetooth HCI transport over virtio. Signed-off-by: Marcel Holtmann Signed-off-by: Luiz Augusto von Dentz

uapi: virtio_ids: add a sound device type ID from OASIS spec

2021-03-07T08:07:06+00:00

The OASIS virtio spec defines a sound device type ID that is not present in the header yet. Signed-off-by: Anton Yakovlev Link: https://lore.kernel.org/r/20210302164709.3142702-2-anton.yakovlev@opensynergy.com Signed-off-by: Takashi Iwai

uapi: virtio_ids: add missing device type IDs from OASIS spec

2020-12-18T21:14:31+00:00

The OASIS virtio spec (1.1) defines several IDs that aren't reflected in the header yet. Fixing this by adding the missing IDs, even though they're not yet used by the kernel yet. Signed-off-by: Enrico Weigelt, metux IT consult Link: https://lore.kernel.org/r/20201202111931.31953-2-info@metux.net Signed-off-by: Michael S. Tsirkin

uapi: virtio_ids.h: consistent indentions

2020-12-18T21:14:31+00:00

Fixing the differing indentions to be consistent and properly aligned. Signed-off-by: Enrico Weigelt, metux IT consult Link: https://lore.kernel.org/r/20201202111931.31953-1-info@metux.net Signed-off-by: Michael S. Tsirkin

virtio-mem: Paravirtualized memory hotplug

2020-06-04T19:36:52+00:00

Each virtio-mem device owns exactly one memory region. It is responsible for adding/removing memory from that memory region on request. When the device driver starts up, the requested amount of memory is queried and then plugged to Linux. On request, further memory can be plugged or unplugged. This patch only implements the plugging part. On x86-64, memory can currently be plugged in 4MB ("subblock") granularity. When required, a new memory block will be added (e.g., usually 128MB on x86-64) in order to plug more subblocks. Only x86-64 was tested for now. The online_page callback is used to keep unplugged subblocks offline when onlining memory - similar to the Hyper-V balloon driver. Unplugged pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to skip them. User space is usually responsible for onlining the added memory. The memory hotplug notifier is used to synchronize virtio-mem activity against memory onlining/offlining. Each virtio-mem device can belong to a NUMA node, which allows us to easily add/remove small chunks of memory to/from a specific NUMA node by using multiple virtio-mem devices. Something that works even when the guest has no idea about the NUMA topology. One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many "sub-DIMMS". This patch directly introduces the basic infrastructure to implement memory unplug. Especially the memory block states and subblock bitmaps will be heavily used there. Notes: - In case memory is to be onlined by user space, we limit the amount of offline memory blocks, to not run out of memory. This is esp. an issue if memory is added faster than it is getting onlined. - Suspend/Hibernate is not supported due to the way virtio-mem devices behave. Limited support might be possible in the future. - Reloading the device driver is not supported. Reviewed-by: Pankaj Gupta Tested-by: Pankaj Gupta Cc: "Michael S. Tsirkin" Cc: Jason Wang Cc: Oscar Salvador Cc: Michal Hocko Cc: Igor Mammedov Cc: Dave Young Cc: Andrew Morton Cc: Dan Williams Cc: Pavel Tatashin Cc: Stefan Hajnoczi Cc: Vlastimil Babka Cc: "Rafael J. Wysocki" Cc: Len Brown Cc: linux-acpi@vger.kernel.org Signed-off-by: David Hildenbrand Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com Signed-off-by: Michael S. Tsirkin

mac80211_hwsim: add frame transmission support over virtio

2020-03-20T13:42:19+00:00

This allows communication with external entities. It also required fixing up the netlink policy, since NLA_UNSPEC attributes are no longer accepted. Signed-off-by: Erel Geron [port to backports, inline the ID, use 29 as the ID as requested, drop != NULL checks, reduce ifdefs] Link: https://lore.kernel.org/r/20200305143212.c6e4c87d225b.I7ce60bf143e863dcdf0fb8040aab7168ba549b99@changeid Signed-off-by: Johannes Berg

virtio-fs: add virtiofs filesystem

2019-09-18T18:17:50+00:00

Add a basic file system module for virtio-fs. This does not yet contain shared data support between host and guest or metadata coherency speedups. However it is already significantly faster than virtio-9p. Design Overview =============== With the goal of designing something with better performance and local file system semantics, a bunch of ideas were proposed. - Use fuse protocol (instead of 9p) for communication between guest and host. Guest kernel will be fuse client and a fuse server will run on host to serve the requests. - For data access inside guest, mmap portion of file in QEMU address space and guest accesses this memory using dax. That way guest page cache is bypassed and there is only one copy of data (on host). This will also enable mmap(MAP_SHARED) between guests. - For metadata coherency, there is a shared memory region which contains version number associated with metadata and any guest changing metadata updates version number and other guests refresh metadata on next access. This is yet to be implemented. How virtio-fs differs from existing approaches ============================================== The unique idea behind virtio-fs is to take advantage of the co-location of the virtual machine and hypervisor to avoid communication (vmexits). DAX allows file contents to be accessed without communication with the hypervisor. The shared memory region for metadata avoids communication in the common case where metadata is unchanged. By replacing expensive communication with cheaper shared memory accesses, we expect to achieve better performance than approaches based on network file system protocols. In addition, this also makes it easier to achieve local file system semantics (coherency). These techniques are not applicable to network file system protocols since the communications channel is bypassed by taking advantage of shared memory on a local machine. This is why we decided to build virtio-fs rather than focus on 9P or NFS. Caching Modes ============= Like virtio-9p, different caching modes are supported which determine the coherency level as well. The “cache=FOO” and “writeback” options control the level of coherence between the guest and host filesystems. - cache=none metadata, data and pathname lookup are not cached in guest. They are always fetched from host and any changes are immediately pushed to host. - cache=always metadata, data and pathname lookup are cached in guest and never expire. - cache=auto metadata and pathname lookup cache expires after a configured amount of time (default is 1 second). Data is cached while the file is open (close to open consistency). - writeback/no_writeback These options control the writeback strategy. If writeback is disabled, then normal writes will immediately be synchronized with the host fs. If writeback is enabled, then writes may be cached in the guest until the file is closed or an fsync(2) performed. This option has no effect on mmap-ed writes or writes going through the DAX mechanism. Signed-off-by: Stefan Hajnoczi Signed-off-by: Vivek Goyal Acked-by: Michael S. Tsirkin Signed-off-by: Miklos Szeredi