BMC/Intel-BMC/linux.git/include/trace, branch dev-4.18

Merge tag 'v4.18.19' into dev-4.18

2018-11-15T00:19:24+00:00

This is the 4.18.19 stable release Signed-off-by: Joel Stanley

rxrpc: Fix error distribution

2018-11-04T13:51:42+00:00

[ Upstream commit f334430316e7fd37c4821ebec627e27714bb5d76 ] Fix error distribution by immediately delivering the errors to all the affected calls rather than deferring them to a worker thread. The problem with the latter is that retries and things can happen in the meantime when we want to stop that sooner. To this end: (1) Stop the error distributor from removing calls from the error_targets list so that peer->lock isn't needed to synchronise against other adds and removals. (2) Require the peer's error_targets list to be accessed with RCU, thereby avoiding the need to take peer->lock over distribution. (3) Don't attempt to affect a call's state if it is already marked complete. Signed-off-by: David Howells Signed-off-by: Sasha Levin

fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire

2018-08-27T22:17:32+00:00

The Aspeed AST2x00 can contain a ColdFire v1 coprocessor which is currently unused on OpenPower systems. This adds an alternative to the fsi-master-gpio driver that uses that coprocessor instead of bit banging from the ARM core itself. The end result is about 4 times faster. The firmware for the coprocessor and its source code can be found at https://github.com/ozbenh/cf-fsi and is system specific. Signed-off-by: Benjamin Herrenschmidt (cherry picked from commit 6a794a27daca9c5a39de13c03b0748bb2d4a7a70) Signed-off-by: Joel Stanley

fsi: master-gpio: Add more tracepoints

2018-08-27T22:17:32+00:00

This adds a few more tracepoints that have proven useful when debugging issues with the FSI bus. This also makes echo_delay() use clock_zeros() instead of open-code it in order to share the tracepoint. Signed-off-by: Benjamin Herrenschmidt Reviewed-by: Joel Stanley (cherry picked from commit 777fd524ba197475a60198aa1666408662acbcbc) Signed-off-by: Joel Stanley

fsi/fsi-master-gpio: Implement CRC error recovery

2018-08-27T22:17:32+00:00

The FSI protocol defines two modes of recovery from CRC errors, this implements both: - If the device returns an ECRC (it detected a CRC error in the command), then we simply issue the command again. - If the master detects a CRC error in the response, we send an E_POLL command which requests a resend of the response without actually re-executing the command (which could otherwise have unwanted side effects such as dequeuing a FIFO twice). Signed-off-by: Benjamin Herrenschmidt Reviewed-by: Christopher Bostic Tested-by: Joel Stanley --- Note: This was actually tested by removing some of my fixes, thus causing us to hit occasional CRC errors during high LPC activity. (cherry picked from commit 4e56828a5db19e2de8f8dc464c6df2e7e9ff4e13) Signed-off-by: Joel Stanley

fsi: gpio: Trace busy count

2018-08-27T22:17:32+00:00

An observation from trace output of the existing FSI tracepoints was that the remote device was sometimes reporting as busy. Add a new tracepoint reporting the busy count in order to get a better grip on how often this is the case. Signed-off-by: Andrew Jeffery Acked-by: Eddie James Signed-off-by: Benjamin Herrenschmidt Tested-by: Joel Stanley (cherry picked from commit 918da95176beb743ff47b3bbfb0a4ee420658a95) Signed-off-by: Joel Stanley

Merge tag 'nfs-for-4.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

2018-06-12T17:09:03+00:00

Pull NFS client updates from Trond Myklebust: "Highlights include: Stable fixes: - Fix a 1-byte stack overflow in nfs_idmap_read_and_verify_message - Fix a hang due to incorrect error returns in rpcrdma_convert_iovs() - Revert an incorrect change to the NFSv4.1 callback channel - Fix a bug in the NFSv4.1 sequence error handling Features and optimisations: - Support for piggybacking a LAYOUTGET operation to the OPEN compound - RDMA performance enhancements to deal with transport congestion - Add proper SPDX tags for NetApp-contributed RDMA source - Do not request delegated file attributes (size+change) from the server - Optimise away a GETATTR in the lookup revalidate code when doing NFSv4 OPEN - Optimise away unnecessary lookups for rename targets - Misc performance improvements when freeing NFSv4 delegations Bugfixes and cleanups: - Try to fail quickly if proto=rdma - Clean up RDMA receive trace points - Fix sillyrename to return the delegation when appropriate - Misc attribute revalidation fixes - Immediately clear the pNFS layout on a file when the server returns ESTALE - Return NFS4ERR_DELAY when delegation/layout recalls fail due to igrab() - Fix the client behaviour on NFS4ERR_SEQ_FALSE_RETRY" * tag 'nfs-for-4.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (80 commits) skip LAYOUTRETURN if layout is invalid NFSv4.1: Fix the client behaviour on NFS4ERR_SEQ_FALSE_RETRY NFSv4: Fix a typo in nfs41_sequence_process NFSv4: Revert commit 5f83d86cf531d ("NFSv4.x: Fix wraparound issues..") NFSv4: Return NFS4ERR_DELAY when a layout recall fails due to igrab() NFSv4: Return NFS4ERR_DELAY when a delegation recall fails due to igrab() NFSv4.0: Remove transport protocol name from non-UCS client ID NFSv4.0: Remove cl_ipaddr from non-UCS client ID NFSv4: Fix a compiler warning when CONFIG_NFS_V4_1 is undefined NFS: Filter cache invalidation when holding a delegation NFS: Ignore NFS_INO_REVAL_FORCED in nfs_check_inode_attributes() NFS: Improve caching while holding a delegation NFS: Fix attribute revalidation NFS: fix up nfs_setattr_update_inode NFSv4: Ensure the inode is clean when we set a delegation NFSv4: Ignore NFS_INO_REVAL_FORCED in nfs4_proc_access NFSv4: Don't ask for delegated attributes when adding a hard link NFSv4: Don't ask for delegated attributes when revalidating the inode NFS: Pass the inode down to the getattr() callback NFSv4: Don't request size+change attribute if they are delegated to us ...

Merge tag 'nfsd-4.18' of git://linux-nfs.org/~bfields/linux

2018-06-12T16:49:33+00:00

Pull nfsd updates from Bruce Fields: "A relatively quiet cycle for nfsd. The largest piece is an RDMA update from Chuck Lever with new trace points, miscellaneous cleanups, and streamlining of the send and receive paths. Other than that, some miscellaneous bugfixes" * tag 'nfsd-4.18' of git://linux-nfs.org/~bfields/linux: (26 commits) nfsd: fix error handling in nfs4_set_delegation() nfsd: fix potential use-after-free in nfsd4_decode_getdeviceinfo Fix 16-byte memory leak in gssp_accept_sec_context_upcall svcrdma: Fix incorrect return value/type in svc_rdma_post_recvs svcrdma: Remove unused svc_rdma_op_ctxt svcrdma: Persistently allocate and DMA-map Send buffers svcrdma: Simplify svc_rdma_send() svcrdma: Remove post_send_wr svcrdma: Don't overrun the SGE array in svc_rdma_send_ctxt svcrdma: Introduce svc_rdma_send_ctxt svcrdma: Clean up Send SGE accounting svcrdma: Refactor svc_rdma_dma_map_buf svcrdma: Allocate recv_ctxt's on CPU handling Receives svcrdma: Persistently allocate and DMA-map Receive buffers svcrdma: Preserve Receive buffer until svc_rdma_sendto svcrdma: Simplify svc_rdma_recv_ctxt_put svcrdma: Remove sc_rq_depth svcrdma: Introduce svc_rdma_recv_ctxt svcrdma: Trace key RDMA API events svcrdma: Trace key RPC/RDMA protocol events ...

Merge branch 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-06-10T17:17:09+00:00

Pull restartable sequence support from Thomas Gleixner: "The restartable sequences syscall (finally): After a lot of back and forth discussion and massive delays caused by the speculative distraction of maintainers, the core set of restartable sequences has finally reached a consensus. It comes with the basic non disputed core implementation along with support for arm, powerpc and x86 and a full set of selftests It was exposed to linux-next earlier this week, so it does not fully comply with the merge window requirements, but there is really no point to drag it out for yet another cycle" * 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: Provide Makefile, scripts, gitignore rseq/selftests: Provide parametrized tests rseq/selftests: Provide basic percpu ops test rseq/selftests: Provide basic test rseq/selftests: Provide rseq library selftests/lib.mk: Introduce OVERRIDE_TARGETS powerpc: Wire up restartable sequences system call powerpc: Add syscall detection for restartable sequences powerpc: Add support for restartable sequences x86: Wire up restartable sequence system call x86: Add support for restartable sequences arm: Wire up restartable sequences system call arm: Add syscall detection for restartable sequences arm: Add restartable sequences support rseq: Introduce restartable sequences system call uapi/headers: Provide types_32_64.h

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-06-07T01:39:49+00:00

Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...