BMC/Intel-BMC/linux.git/include/trace, branch dev-4.17

fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire

2018-07-13T00:44:54+00:00

The Aspeed AST2x00 can contain a ColdFire v1 coprocessor which is currently unused on OpenPower systems. This adds an alternative to the fsi-master-gpio driver that uses that coprocessor instead of bit banging from the ARM core itself. The end result is about 4 times faster. The firmware for the coprocessor and its source code can be found at https://github.com/ozbenh/cf-fsi and is system specific. OpenBMC-Staging-Count: 1 Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Joel Stanley

fsi: master-gpio: Add more tracepoints

2018-06-28T05:32:11+00:00

This adds a few more tracepoints that have proven useful when debugging issues with the FSI bus. OpenBMC-Staging-Count: 1 Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Joel Stanley

fsi/fsi-master-gpio: Implement CRC error recovery

2018-06-19T03:05:38+00:00

The FSI protocol defines two modes of recovery from CRC errors, this implements both: - If the device returns an ECRC (it detected a CRC error in the command), then we simply issue the command again. - If the master detects a CRC error in the response, we send an E_POLL command which requests a resend of the response without actually re-executing the command (which could otherwise have unwanted side effects such as dequeuing a FIFO twice). OpenBMC-Staging-Count: 2 Signed-off-by: Benjamin Herrenschmidt Reviewed-by: Christopher Bostic Tested-by: Joel Stanley Signed-off-by: Joel Stanley

fsi: gpio: Trace busy count

2018-06-19T03:05:38+00:00

An observation from trace output of the existing FSI tracepoints was that the remote device was sometimes reporting as busy. Add a new tracepoint reporting the busy count in order to get a better grip on how often this is the case. OpenBMC-Staging-Count: 2 Signed-off-by: Andrew Jeffery Acked-by: Eddie James Signed-off-by: Benjamin Herrenschmidt Tested-by: Joel Stanley Signed-off-by: Joel Stanley

sched, tracing: Fix trace_sched_pi_setprio() for deboosting

2018-05-25T06:04:01+00:00

Since the following commit: b91473ff6e97 ("sched,tracing: Update trace_sched_pi_setprio()") the sched_pi_setprio trace point shows the "newprio" during a deboost: |futex sched_pi_setprio: comm=futex_requeue_p pid"34 oldprio newprio=3D98 |futex sched_switch: prev_comm=futex_requeue_p prev_pid"34 prev_prio=120 This patch open codes __rt_effective_prio() in the tracepoint as the 'newprio' to get the old behaviour back / the correct priority: |futex sched_pi_setprio: comm=futex_requeue_p pid"20 oldprio newprio=3D120 |futex sched_switch: prev_comm=futex_requeue_p prev_pid"20 prev_prio=120 Peter suggested to open code the new priority so people using tracehook could get the deadline data out. Reported-by: Mansky Christian Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thomas Gleixner Fixes: b91473ff6e97 ("sched,tracing: Update trace_sched_pi_setprio()") Link: http://lkml.kernel.org/r/20180524132647.gg6ziuogczdmjjzu@linutronix.de Signed-off-by: Ingo Molnar

Merge tag 'trace-v4.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2018-05-16T23:45:23+00:00

Pull tracing fix from Steven Rostedt: "Some of the ftrace internal events use a zero for a data size of a field event. This is increasingly important for the histogram trigger work that is being extended. While auditing trace events, I found that a couple of the xen events were used as just marking that a function was called, by creating a static array of size zero. This can play havoc with the tracing features if these events are used, because a zero size of a static array is denoted as a special nul terminated dynamic array (this is what the trace_marker code uses). But since the xen events have no size, they are not nul terminated, and unexpected results may occur. As trace events were never intended on being a marker to denote that a function was hit or not, especially since function tracing and kprobes can trivially do the same, the best course of action is to simply remove these events" * tag 'trace-v4.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}

tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}

2018-05-14T21:02:30+00:00

Doing an audit of trace events, I discovered two trace events in the xen subsystem that use a hack to create zero data size trace events. This is not what trace events are for. Trace events add memory footprint overhead, and if all you need to do is see if a function is hit or not, simply make that function noinline and use function tracer filtering. Worse yet, the hack used was: __array(char, x, 0) Which creates a static string of zero in length. There's assumptions about such constructs in ftrace that this is a dynamic string that is nul terminated. This is not the case with these tracepoints and can cause problems in various parts of ftrace. Nuke the trace events! Link: http://lkml.kernel.org/r/20180509144605.5a220327@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 95a7d76897c1e ("xen/mmu: Use Xen specific TLB flush instead of the generic one.") Reviewed-by: Juergen Gross Signed-off-by: Steven Rostedt (VMware)

afs: Add a tracepoint to record callbacks from unlisted servers

2018-05-14T14:15:18+00:00

Add a tracepoint to record callbacks from servers for which we don't have a record. Signed-off-by: David Howells

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-05-11T21:14:46+00:00

Pull networking fixes from David Miller: 1) Verify lengths of keys provided by the user is AF_KEY, from Kevin Easton. 2) Add device ID for BCM89610 PHY. Thanks to Bhadram Varka. 3) Add Spectre guards to some ATM code, courtesy of Gustavo A. R. Silva. 4) Fix infinite loop in NSH protocol code. To Eric Dumazet we are most grateful for this fix. 5) Line up /proc/net/netlink headers properly. This fix from YU Bo, we do appreciate. 6) Use after free in TLS code. Once again we are blessed by the honorable Eric Dumazet with this fix. 7) Fix regression in TLS code causing stalls on partial TLS records. This fix is bestowed upon us by Andrew Tomt. 8) Deal with too small MTUs properly in LLC code, another great gift from Eric Dumazet. 9) Handle cached route flushing properly wrt. MTU locking in ipv4, to Hangbin Liu we give thanks for this. 10) Fix regression in SO_BINDTODEVIC handling wrt. UDP socket demux. Paolo Abeni, he gave us this. 11) Range check coalescing parameters in mlx4 driver, thank you Moshe Shemesh. 12) Some ipv6 ICMP error handling fixes in rxrpc, from our good brother David Howells. 13) Fix kexec on mlx5 by freeing IRQs in shutdown path. Daniel Juergens, you're the best! 14) Don't send bonding RLB updates to invalid MAC addresses. Debabrata Benerjee saved us! 15) Uh oh, we were leaking in udp_sendmsg and ping_v4_sendmsg. The ship is now water tight, thanks to Andrey Ignatov. 16) IPSEC memory leak in ixgbe from Colin Ian King, man we've got holes everywhere! 17) Fix error path in tcf_proto_create, Jiri Pirko what would we do without you! * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits) net sched actions: fix refcnt leak in skbmod net: sched: fix error path in tcf_proto_create() when modules are not configured net sched actions: fix invalid pointer dereferencing if skbedit flags missing ixgbe: fix memory leak on ipsec allocation ixgbevf: fix ixgbevf_xmit_frame()'s return type ixgbe: return error on unsupported SFP module when resetting ice: Set rq_last_status when cleaning rq ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg mlxsw: core: Fix an error handling path in 'mlxsw_core_bus_device_register()' bonding: send learning packets for vlans on slave bonding: do not allow rlb updates to invalid mac net/mlx5e: Err if asked to offload TC match on frag being first net/mlx5: E-Switch, Include VF RDMA stats in vport statistics net/mlx5: Free IRQs in shutdown path rxrpc: Trace UDP transmission failure rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages rxrpc: Fix the min security level for kernel calls rxrpc: Fix error reception on AF_INET6 sockets rxrpc: Fix missing start of call timeout qed: fix spelling mistake: "taskelt" -> "tasklet" ...

Merge tag 'nfs-for-4.17-2' of git://git.linux-nfs.org/projects/anna/linux-nfs

2018-05-11T20:56:43+00:00

Pull NFS client fixes from Anna Schumaker: "These patches fix both a possible corruption during NFSoRDMA MR recovery, and a sunrpc tracepoint crash. Additionally, Trond has a new email address to put in the MAINTAINERS file" * tag 'nfs-for-4.17-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: Change Trond's email address in MAINTAINERS sunrpc: Fix latency trace point crashes xprtrdma: Fix list corruption / DMAR errors during MR recovery