BMC/Intel-BMC/linux.git/include/sound/hdaudio.h, branch dev-5.4

ALSA: hda: Manage concurrent reg access more properly

2020-05-27T15:46:37+00:00

[ Upstream commit 1a462be52f4505a2719631fb5aa7bfdbd37bfd8d ] In the commit 8e85def5723e ("ALSA: hda: enable regmap internal locking"), we re-enabled the regmap lock due to the reported regression that showed the possible concurrent accesses. It was a temporary workaround, and there are still a few opened races even after the revert. In this patch, we cover those still opened windows with a proper mutex lock and disable the regmap internal lock again. First off, the patch introduces a new snd_hdac_device.regmap_lock mutex that is applied for each snd_hdac_regmap_*() call, including read, write and update helpers. The mutex is applied carefully so that it won't block the self-power-up procedure in the helper function. Also, this assures the protection for the accesses without regmap, too. The snd_hdac_regmap_update_raw() is refactored to use the standard regmap_update_bits_check() function instead of the open-code. The non-regmap case is still open-coded but it's an easy part. The all read and write operations are in the single mutex protection, so it's now race-free. In addition, a couple of new helper functions are added: snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both are called from HD-audio legacy driver. The former is to initialize the given verb bits but only once when it's not initialized yet. Due to this condition, the function invokes regcache_cache_only(), and it's now performed inside the regmap_lock (formerly it was racy) too. The latter function is for simply invoking regcache_sync() inside the regmap_lock, which is called from the codec resume call path. Along with that, the HD-audio codec driver code is slightly modified / simplified to adapt those new functions. And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are rewritten with the helper macro. It's just for simplification because the code logic is identical among all those functions. Tested-by: Kai Vehmanen Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin

ALSA: hda: Apply aligned MMIO access only conditionally

2020-02-11T12:35:15+00:00

commit 4d024fe8f806e20e577cc934204c5784c7063293 upstream. It turned out that the recent simplification of HD-audio bus access helpers caused a regression on the virtual HD-audio device on QEMU with ARM platforms. The driver got a CORB/RIRB timeout and couldn't probe any codecs. The essential difference that caused a problem was the enforced aligned MMIO accesses by simplification. Since snd-hda-tegra driver is enabled on ARM, it enables CONFIG_SND_HDA_ALIGNED_MMIO, which makes the all HD-audio drivers using the aligned MMIO accesses. While this is mandatory for snd-hda-tegra, it seems that snd-hda-intel on ARM gets broken by this access pattern. For addressing the regression, this patch introduces a new flag, aligned_mmio, to hdac_bus object, and applies the aligned MMIO only when this flag is set. This change affects only platforms with CONFIG_SND_HDA_ALIGNED_MMIO set, i.e. mostly only for ARM platforms. Unfortunately the patch became a big bigger than it should be, just because the former calls didn't take hdac_bus object in the argument, hence we had to extend the call patterns. Fixes: 19abfefd4c76 ("ALSA: hda: Direct MMIO accesses") BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1161152 Cc: Link: https://lore.kernel.org/r/20200120104127.28985-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: hda: Modify stream stripe mask only when needed

2019-12-13T07:42:39+00:00

commit e38e486d66e2a3b902768fd71c32dbf10f77e1cb upstream. The recent commit in HD-audio stream management for changing the stripe control seems causing a regression on some platforms. The stripe control is currently used only by HDMI codec, and applying the stripe mask unconditionally may lead to scratchy and static noises as seen on some MacBooks. For addressing the regression, this patch changes the stream management code to apply the stripe mask conditionally only when the codec driver requested. Fixes: 9b6f7e7a296e ("ALSA: hda: program stripe bits for controller") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477 Tested-by: Michael Pobega Cc: Link: https://lore.kernel.org/r/20191202074947.1617-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ALSA: hda: Unexport a few more stuff

2019-08-14T18:00:56+00:00

Drop EXPORT_SYMBOL*() from a few more stuff in HD-audio core that aren't used outside. Particular the unsol event handler can be staticized now because the recent change removed all external callers. Signed-off-by: Takashi Iwai

ALSA: hda: Drop export of snd_hdac_bus_add/remove_device()

2019-08-14T17:51:24+00:00

snd_hdac_bus_add_device() and snd_hdac_remove_device() are called only internally in hda-core. Let's drop the exports of them and move the declarations into local.h. Signed-off-by: Takashi Iwai

ALSA: hda: Direct MMIO accesses

2019-08-08T14:36:18+00:00

HD-audio drivers access to the mmio registers indirectly via the corresponding bus->io_ops callbacks. This is because some platform (notably Tegra SoC) requires the word-aligned access. But it's rather a rare case, and other platforms suffer from the penalties by indirect calls unnecessarily. This patch is an attempt to optimize and cleanup for this situation. Now the special aligned access is used only when a new kconfig CONFIG_SND_HDA_ALIGNED_MMIO is set. And the HD-audio core itself provides the aligned MMIO access helpers instead of the driver side. If Kconfig isn't set (as default), the standard helpers like readl() or writel() are used directly. A couple of places in ASoC Intel drivers have the access via io_ops reg_writel(), and they are replaced with the direct writel() calls. And now with this patch, the whole bus->io_ops becomes empty, so it's dropped completely. The bus initialization functions are changed accordingly as well to drop the whole bus->io_ops. Reviewed-by: Pierre-Louis Bossart Signed-off-by: Takashi Iwai

ALSA: hda: Remove page allocation redirection

2019-08-08T14:34:49+00:00

The HD-audio core allocates and releases pages via driver's specific dma_alloc_pages and dma_free_pages ops defined in bus->io_ops. This was because some platforms require the uncached pages and the handling of page flags had to be done locally in the driver code. Since the recent change in ALSA core memory allocator, we can simply pass SNDRV_DMA_TYPE_DEV_UC for the uncached pages, and the only difference became about this type to be passed to the core allocator. That is, it's good time for cleaning up the mess. This patch changes the allocation code in HD-audio core to call the core allocator directly so that we get rid of dma_alloc_pages and dma_free_pages io_ops. If a driver needs the uncached pages, it has to set bus->dma_type right after the bus initialization. This is merely a code refactoring and shouldn't bring any behavior changes. Reviewed-by: Pierre-Louis Bossart Signed-off-by: Takashi Iwai

Merge branch 'topic/hda-refresh-cleanup' into for-next

2019-07-07T09:29:30+00:00

Merge a cleanup for HD-audio widget refresh code Signed-off-by: Takashi Iwai

ALSA: hda: Simplify snd_hdac_refresh_widgets()

2019-07-05T10:01:06+00:00

Along with the recent fix for the races of snd_hdac_refresh_widgets() it turned out that the instantiation of widgets sysfs at snd_hdac_sysfs_reinit() could cause a race. The race itself was already covered later by extending the mutex protection range, the commit 98482377dc72 ("ALSA: hda: Fix widget_mutex incomplete protection"), but this also indicated that the call of *_reinit() is basically superfluous, as the widgets shall be created sooner or later from snd_hdac_device_register(). This patch removes the redundant call of snd_hdac_sysfs_reinit() at first. By this removal, the sysfs argument itself in snd_hdac_refresh_widgets() becomes superfluous, too, because the only case sysfs=false is always with codec->widgets=NULL. So, we drop this redundant argument as well. Signed-off-by: Takashi Iwai

ALSA: hda: move polling_mode flag to struct hdac_bus

2019-05-28T05:52:02+00:00

polling mode is a useful function in the get_response function. Move polling_mode flag from struct azx to struct hdac_bus so people can implement polling mode in their own get_response function without adding a polling_mode flag in their local chip structure. Signed-off-by: Bard Liao Signed-off-by: Takashi Iwai