BMC/Intel-BMC/linux.git/include/rdma/ib_sa.h, branch dev-4.6

IB/cma: Join and leave multicast groups with IGMP

2015-12-23T15:39:53+00:00

Since RoCEv2 is a protocol over IP header it is required to send IGMP join and leave requests to the network when joining and leaving multicast groups. Signed-off-by: Moni Shoua Signed-off-by: Doug Ledford

IB/core: Add gid_type to gid attribute

2015-12-23T15:35:10+00:00

In order to support multiple GID types, we need to store the gid_type with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT GID table entries shall have a "GID type" attribute that denotes the L3 Address type". The currently supported GID is IB_GID_TYPE_IB which is also RoCE v1 GID type. This implies that gid_type should be added to roce_gid_table meta-data. Signed-off-by: Matan Barak Signed-off-by: Doug Ledford

IB/core: Remove smac and vlan id from path record

2015-10-22T03:48:18+00:00

The GID cache accompanies every GID with attributes. The GID attributes link the GID with its netdevice, which could be resolved to smac and vlan id easily. Since we've added the netdevice (ifindex and net) to the path record, storing the L2 attributes is duplicated data and hence these attributes are removed. Signed-off-by: Matan Barak Reviewed-By: Devesh Sharma Signed-off-by: Doug Ledford

IB/core: Add netdev to path record

2015-10-22T03:48:17+00:00

In order to find the sgid_index, one could just query the IB cache with the correct GID and netdevice. Therefore, instead of storing the L2 attributes directly in the path, we only store the ifindex and net and use them later to get the sgid_index. The vlan_id and smac L2 attributes are removed in a later patch. Signed-off-by: Matan Barak Reviewed-By: Devesh Sharma Signed-off-by: Doug Ledford

IB/core: Ethernet L2 attributes in verbs/cm structures

2014-01-14T22:20:54+00:00

This patch add the support for Ethernet L2 attributes in the verbs/cm/cma structures. When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority in a similar manner that the IB L2 (and the L4 PKEY) attributes are used. Thus, those attributes were added to the following structures: * ib_ah_attr - added dmac * ib_qp_attr - added smac and vlan_id, (sl remains vlan priority) * ib_wc - added smac, vlan_id * ib_sa_path_rec - added smac, dmac, vlan_id * cm_av - added smac and vlan_id For the path record structure, extra care was taken to avoid the new fields when packing it into wire format, so we don't break the IB CM and SA wire protocol. On the active side, the CM fills. its internal structures from the path provided by the ULP. We add there taking the ETH L2 attributes and placing them into the CM Address Handle (struct cm_av). On the passive side, the CM fills its internal structures from the WC associated with the REQ message. We add there taking the ETH L2 attributes from the WC. When the HW driver provides the required ETH L2 attributes in the WC, they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core code checks for the presence of these flags, and in their absence does address resolution from the ib_init_ah_from_wc() helper function. ib_modify_qp_is_ok is also updated to consider the link layer. Some parameters are mandatory for Ethernet link layer, while they are irrelevant for IB. Vendor drivers are modified to support the new function signature. Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

IB/sa: Export function to pack a path record into wire format

2013-06-21T06:35:39+00:00

Allow converting from struct ib_sa_path_rec to the IB defined SA path record wire format. This will be used to report path data from the rdma cm into user space. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier

IB/sa: Add GuidInfoRecord query support

2012-07-09T01:05:06+00:00

This query is needed for SRIOV alias GUID support. The query is implemented per the IB Spec definition in section 15.2.5.18 (GuidInfoRecord). Signed-off-by: Erez Shitrit Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

atomic: use

2011-07-26T23:49:47+00:00

This allows us to move duplicated code in (atomic_inc_not_zero() for now) to Signed-off-by: Arun Sharma Reviewed-by: Eric Dumazet Cc: Ingo Molnar Cc: David Miller Cc: Eric Dumazet Acked-by: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

RDMA/ucma: Add option to manually set IB path

2009-11-16T17:30:33+00:00

Export rdma_set_ib_paths to user space to allow applications to manually set the IB path used for connections. This allows alternative ways for a user space application or library to obtain path record information, including retrieving path information from cached data, avoiding direct interaction with the IB SA. The IB SA is a single, centralized entity that can limit scaling on large clusters running MPI applications. Future changes to the rdma cm can expand on this framework to support the full range of features allowed by the IB CM, such as separate forward and reverse paths and APM. Signed-off-by: Sean Hefty Reviewed-By: Jason Gunthorpe Signed-off-by: Roland Dreier

RDMA: Improve include file coding style

2008-07-15T06:48:44+00:00

Remove subversion $Id lines and improve readability by fixing other coding style problems pointed out by checkpatch.pl. Signed-off-by: Dotan Barak Signed-off-by: Roland Dreier