BMC/Intel-BMC/linux.git/include/net, branch v4.17.12

tcp: add max_quickacks param to tcp_incr_quickack and tcp_enter_quickack_mode

2018-08-03T05:48:06+00:00

[ Upstream commit 9a9c9b51e54618861420093ae6e9b50a961914c5 ] We want to add finer control of the number of ACK packets sent after ECN events. This patch is not changing current behavior, it only enables following change. Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Acked-by: Neal Cardwell Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/ipv6: Fix linklocal to global address with VRF

2018-07-28T05:57:15+00:00

[ Upstream commit 24b711edfc34bc45777a3f068812b7d1ed004a5d ] Example setup: host: ip -6 addr add dev eth1 2001:db8:104::4 where eth1 is enslaved to a VRF switch: ip -6 ro add 2001:db8:104::4/128 dev br1 where br1 only has an LLA ping6 2001:db8:104::4 ssh 2001:db8:104::4 (NOTE: UDP works fine if the PKTINFO has the address set to the global address and ifindex is set to the index of eth1 with a destination an LLA). For ICMP, icmp6_iif needs to be updated to check if skb->dev is an L3 master. If it is then return the ifindex from rt6i_idev similar to what is done for loopback. For TCP, restore the original tcp_v6_iif definition which is needed in most places and add a new tcp_v6_iif_l3_slave that considers the l3_slave variability. This latter check is only needed for socket lookups. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tcp: do not delay ACK in DCTCP upon CE status change

2018-07-28T05:57:14+00:00

[ Upstream commit a0496ef2c23b3b180902dd185d0d63ccbc624cf8 ] Per DCTCP RFC8257 (Section 3.2) the ACK reflecting the CE status change has to be sent immediately so the sender can respond quickly: """ When receiving packets, the CE codepoint MUST be processed as follows: 1. If the CE codepoint is set and DCTCP.CE is false, set DCTCP.CE to true and send an immediate ACK. 2. If the CE codepoint is not set and DCTCP.CE is true, set DCTCP.CE to false and send an immediate ACK. """ Previously DCTCP implementation may continue to delay the ACK. This patch fixes that to implement the RFC by forcing an immediate ACK. Tested with this packetdrill script provided by Larry Brakmo 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 0.100 > SE. 0:0(0) ack 1 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_SOCKET, SO_DEBUG, [1], 4) = 0 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 +0.005 < [ce] . 2001:3001(1000) ack 2 win 257 +0.000 > [ect01] . 2:2(0) ack 2001 // Previously the ACK below would be delayed by 40ms +0.000 > [ect01] E. 2:2(0) ack 3001 +0.500 < F. 9501:9501(0) ack 4 win 257 Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tcp: do not cancel delay-AcK on DCTCP special ACK

2018-07-28T05:57:14+00:00

[ Upstream commit 27cde44a259c380a3c09066fc4b42de7dde9b1ad ] Currently when a DCTCP receiver delays an ACK and receive a data packet with a different CE mark from the previous one's, it sends two immediate ACKs acking previous and latest sequences respectly (for ECN accounting). Previously sending the first ACK may mark off the delayed ACK timer (tcp_event_ack_sent). This may subsequently prevent sending the second ACK to acknowledge the latest sequence (tcp_ack_snd_check). The culprit is that tcp_send_ack() assumes it always acknowleges the latest sequence, which is not true for the first special ACK. The fix is to not make the assumption in tcp_send_ack and check the actual ack sequence before cancelling the delayed ACK. Further it's safer to pass the ack sequence number as a local variable into tcp_send_ack routine, instead of intercepting tp->rcv_nxt to avoid future bugs like this. Reported-by: Neal Cardwell Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sctp: introduce sctp_dst_mtu

2018-07-25T09:26:12+00:00

[ Upstream commit 6ff0f871c20ec1769a481edca86f23c76b2b06d3 ] Which makes sure that the MTU respects the minimum value of SCTP_DEFAULT_MINSEGMENT and that it is correctly aligned. Signed-off-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: fix useless rol32 call on hash

2018-07-25T09:26:10+00:00

[ Upstream commit 169dc027fb02492ea37a0575db6a658cf922b854 ] The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Thanks to David Lebrun for spotting this. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

nfp: reject binding to shared blocks

2018-07-22T13:16:03+00:00

[ Upstream commit 951a8ee6def39e25d0e60b9394e5a249ba8b2390 ] TC shared blocks allow multiple qdiscs to be grouped together and filters shared between them. Currently the chains of filters attached to a block are only flushed when the block is removed. If a qdisc is removed from a block but the block still exists, flow del messages are not passed to the callback registered for that qdisc. For the NFP, this presents the possibility of rules still existing in hw when they should be removed. Prevent binding to shared blocks until the kernel can send per qdisc del messages when block unbinds occur. tcf_block_shared() was not used outside of the core until now, so also add an empty implementation for builds with CONFIG_NET_CLS=n. Fixes: 4861738775d7 ("net: sched: introduce shared filter blocks infrastructure") Signed-off-by: John Hurley Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

udp: fix rx queue len reported by diag and proc interface

2018-06-25T23:51:19+00:00

[ Upstream commit 6c206b20092a3623184cff9470dba75d21507874 ] After commit 6b229cf77d68 ("udp: add batching to udp_rmem_release()") the sk_rmem_alloc field does not measure exactly anymore the receive queue length, because we batch the rmem release. The issue is really apparent only after commit 0d4a6608f68c ("udp: do rmem bulk free even if the rx sk queue is empty"): the user space can easily check for an empty socket with not-0 queue length reported by the 'ss' tool or the procfs interface. We need to use a custom UDP helper to report the correct queue length, taking into account the forward allocation deficit. Reported-by: trevor.francis@46labs.com Fixes: 6b229cf77d68 ("UDP: add batching to udp_rmem_release()") Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ipv6: omit traffic class when calculating flow hash

2018-06-11T20:43:18+00:00

[ Upstream commit fa1be7e01ea863e911349e30456706749518eeab ] Some of the code paths calculating flow hash for IPv6 use flowlabel member of struct flowi6 which, despite its name, encodes both flow label and traffic class. If traffic class changes within a TCP connection (as e.g. ssh does), ECMP route can switch between path. It's also inconsistent with other code paths where ip6_flowlabel() (returning only flow label) is used to feed the key. Use only flow label everywhere, including one place where hash key is set using ip6_flowinfo(). Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Fixes: f70ea018da06 ("net: Add functions to get skb->hash based on flow structures") Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sctp: fix the issue that flags are ignored when using kernel_connect

2018-05-22T17:37:26+00:00

Now sctp uses inet_dgram_connect as its proto_ops .connect, and the flags param can't be passed into its proto .connect where this flags is really needed. sctp works around it by getting flags from socket file in __sctp_connect. It works for connecting from userspace, as inherently the user sock has socket file and it passes f_flags as the flags param into the proto_ops .connect. However, the sock created by sock_create_kern doesn't have a socket file, and it passes the flags (like O_NONBLOCK) by using the flags param in kernel_connect, which calls proto_ops .connect later. So to fix it, this patch defines a new proto_ops .connect for sctp, sctp_inet_connect, which calls __sctp_connect() directly with this flags param. After this, the sctp's proto .connect can be removed. Note that sctp_inet_connect doesn't need to do some checks that are not needed for sctp, which makes thing better than with inet_dgram_connect. Suggested-by: Marcelo Ricardo Leitner Signed-off-by: Xin Long Acked-by: Neil Horman Acked-by: Marcelo Ricardo Leitner Reviewed-by: Michal Kubecek Signed-off-by: David S. Miller