BMC/Intel-BMC/linux.git/include/linux/pci-acpi.h, branch dev-4.17

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()

2017-06-07T10:20:49+00:00

acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16 bytes. Instead we convert them to use guid_t type. At the same time we convert current users. acpi_str_to_uuid() becomes useless after the conversion and it's safe to get rid of it. Acked-by: Rafael J. Wysocki Cc: Borislav Petkov Acked-by: Dan Williams Cc: Amir Goldstein Reviewed-by: Jarkko Sakkinen Reviewed-by: Jani Nikula Acked-by: Jani Nikula Cc: Ben Skeggs Acked-by: Benjamin Tissoires Acked-by: Joerg Roedel Acked-by: Adrian Hunter Cc: Yisen Zhuang Acked-by: Bjorn Helgaas Acked-by: Felipe Balbi Acked-by: Mathias Nyman Reviewed-by: Heikki Krogerus Acked-by: Mark Brown Signed-off-by: Andy Shevchenko Signed-off-by: Christoph Hellwig

PCI/ACPI: Extend pci_mcfg_lookup() to return ECAM config accessors

2016-12-06T19:45:48+00:00

pci_mcfg_lookup() is the external interface to the generic MCFG code. Previously it merely looked up the ECAM base address for a given domain and bus range. We want a way to add MCFG quirks, some of which may require special config accessors and adjustments to the ECAM address range. Extend pci_mcfg_lookup() so it can return a pointer to a pci_ecam_ops structure and a struct resource for the ECAM address space. For now, it always returns &pci_generic_ecam_ops (the standard accessor) and the resource described by the MCFG. No functional changes intended. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki Signed-off-by: Bjorn Helgaas

PCI/ACPI: Add generic MCFG table handling

2016-06-10T23:27:59+00:00

On ACPI systems that support memory-mapped config space access, i.e., ECAM, the PCI Firmware Specification says the OS can learn where the ECAM space is from either: - the static MCFG table (for non-hotpluggable bridges), or - the _CBA method (for hotpluggable bridges) The current MCFG table handling code cannot be easily generalized owing to x86-specific quirks, which makes it hard to reuse on other architectures. Implement generic MCFG handling from scratch, including: - Simple MCFG table parsing (via pci_mmcfg_late_init() as in current x86) - MCFG region lookup for a (domain, bus_start, bus_end) tuple [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki Signed-off-by: Jayachandran C Signed-off-by: Bjorn Helgaas Reviewed-by: Lorenzo Pieralisi

PCI/ACPI: Add interface acpi_pci_root_create()

2015-10-16T20:18:51+00:00

Introduce common interface acpi_pci_root_create() and related data structures to create PCI root bus for ACPI PCI host bridges. It will be used to kill duplicated arch specific code for IA64 and x86. It may also help ARM64 in future. Reviewed-by: Lorenzo Pieralisi Tested-by: Tony Luck Signed-off-by: Jiang Liu Acked-by: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki

PCI/ACPI: Optimize device state transition delays

2015-04-08T21:25:25+00:00

The PCI "ACPI additions for FW latency optimizations" ECN (link below) defines two functions in the PCI _DSM: Function 8, "Reset Delay," applies to the entire hierarchy below a PCI host bridge. If it returns one, the OS may assume that all devices in the hierarchy have already completed power-on reset delays. Function 9, "Device Readiness Durations," applies only to the object where it is located. It returns delay durations required after various events if the device requires less time than the spec requires. Delays from this function take precedence over the Reset Delay function. Add support for Reset Delay and part of Device Readiness Durations. [bhelgaas: changelog, comments] Link: https://www.pcisig.com/specifications/conventional/pci_firmware/ECN_fw_latency_optimization_final.pdf Signed-off-by: Aaron Lu Signed-off-by: Bjorn Helgaas

PCI: Make a shareable UUID for PCI firmware ACPI _DSM

2015-04-08T19:39:30+00:00

The PCI Firmware Specification, r3.0, sec 4.6.4.1.3, defines a single UUID for an ACPI _DSM method to provide device-specific control functions. This _DSM method support several functions, including PCI Express Slot Information, PCI Express Slot Number, PCI Bus Capabilities, etc. Move the UUID definition from pci/pci-label.c, where it could be used only for one function, to pci/pci-acpi.c where it can be shared for all these functions. [bhelgaas: changelog] Signed-off-by: Aaron Lu Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki

PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()

2014-11-05T20:06:16+00:00

acpi_pci_get_bridge_handle() returns the ACPI handle for the bridge device (either a host bridge or a PCI-to-PCI bridge) leading to a PCI bus. But SR-IOV virtual functions can be on a virtual bus with no bridge leading to it. Return a NULL acpi_handle in this case instead of trying to dereference the NULL pointer to the bridge. This fixes a NULL pointer dereference oops in pci_get_hp_params() when adding SR-IOV VF devices on virtual buses. [bhelgaas: changelog, add comment in code] Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration") Link: https://bugzilla.kernel.org/show_bug.cgi?id=87591 Reported-by: Chao Zhou Reported-by: Joerg Roedel Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas

ACPI / PM: Revork the handling of ACPI device wakeup notifications

2014-07-22T23:00:45+00:00

Since ACPI wakeup GPEs are going to be enabled during system suspend as well as for runtime wakeup by a subsequent patch and the same notify handlers will be used in both cases, rework the ACPI device wakeup notification framework so that the part specific to physical devices is always run asynchronously from the PM workqueue. This prevents runtime resume callbacks for those devices from being run during system suspend and resume which may not be appropriate, among other things. Also make ACPI device wakeup notification handling a bit more robust agaist subsequent removal of ACPI device objects, whould that ever happen, and create a wakeup source object for each ACPI device configured for wakeup so that wakeup notifications for those devices can wake up the system from the "freeze" sleep state. Signed-off-by: Rafael J. Wysocki

ACPI / hotplug / PCI: Rework acpiphp_check_host_bridge()

2014-02-06T16:31:52+00:00

Since the only existing caller of acpiphp_check_host_bridge(), which is acpi_pci_root_scan_dependent(), already has a struct acpi_device pointer needed to obtain the ACPIPHP context, it doesn't make sense to execute acpi_bus_get_device() on its handle in acpiphp_handle_to_bridge() just in order to get that pointer back. For this reason, modify acpiphp_check_host_bridge() to take a struct acpi_device pointer as its argument and rearrange the code accordingly. Signed-off-by: Rafael J. Wysocki Tested-by: Mika Westerberg