BMC/Intel-BMC/linux.git/include/linux/pci-acpi.h, branch dev-4.10

PCI/ACPI: Extend pci_mcfg_lookup() to return ECAM config accessors

2016-12-06T19:45:48+00:00

pci_mcfg_lookup() is the external interface to the generic MCFG code. Previously it merely looked up the ECAM base address for a given domain and bus range. We want a way to add MCFG quirks, some of which may require special config accessors and adjustments to the ECAM address range. Extend pci_mcfg_lookup() so it can return a pointer to a pci_ecam_ops structure and a struct resource for the ECAM address space. For now, it always returns &pci_generic_ecam_ops (the standard accessor) and the resource described by the MCFG. No functional changes intended. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki Signed-off-by: Bjorn Helgaas

PCI/ACPI: Add generic MCFG table handling

2016-06-10T23:27:59+00:00

On ACPI systems that support memory-mapped config space access, i.e., ECAM, the PCI Firmware Specification says the OS can learn where the ECAM space is from either: - the static MCFG table (for non-hotpluggable bridges), or - the _CBA method (for hotpluggable bridges) The current MCFG table handling code cannot be easily generalized owing to x86-specific quirks, which makes it hard to reuse on other architectures. Implement generic MCFG handling from scratch, including: - Simple MCFG table parsing (via pci_mmcfg_late_init() as in current x86) - MCFG region lookup for a (domain, bus_start, bus_end) tuple [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki Signed-off-by: Jayachandran C Signed-off-by: Bjorn Helgaas Reviewed-by: Lorenzo Pieralisi

PCI/ACPI: Add interface acpi_pci_root_create()

2015-10-16T20:18:51+00:00

Introduce common interface acpi_pci_root_create() and related data structures to create PCI root bus for ACPI PCI host bridges. It will be used to kill duplicated arch specific code for IA64 and x86. It may also help ARM64 in future. Reviewed-by: Lorenzo Pieralisi Tested-by: Tony Luck Signed-off-by: Jiang Liu Acked-by: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki

PCI/ACPI: Optimize device state transition delays

2015-04-08T21:25:25+00:00

The PCI "ACPI additions for FW latency optimizations" ECN (link below) defines two functions in the PCI _DSM: Function 8, "Reset Delay," applies to the entire hierarchy below a PCI host bridge. If it returns one, the OS may assume that all devices in the hierarchy have already completed power-on reset delays. Function 9, "Device Readiness Durations," applies only to the object where it is located. It returns delay durations required after various events if the device requires less time than the spec requires. Delays from this function take precedence over the Reset Delay function. Add support for Reset Delay and part of Device Readiness Durations. [bhelgaas: changelog, comments] Link: https://www.pcisig.com/specifications/conventional/pci_firmware/ECN_fw_latency_optimization_final.pdf Signed-off-by: Aaron Lu Signed-off-by: Bjorn Helgaas

PCI: Make a shareable UUID for PCI firmware ACPI _DSM

2015-04-08T19:39:30+00:00

The PCI Firmware Specification, r3.0, sec 4.6.4.1.3, defines a single UUID for an ACPI _DSM method to provide device-specific control functions. This _DSM method support several functions, including PCI Express Slot Information, PCI Express Slot Number, PCI Bus Capabilities, etc. Move the UUID definition from pci/pci-label.c, where it could be used only for one function, to pci/pci-acpi.c where it can be shared for all these functions. [bhelgaas: changelog] Signed-off-by: Aaron Lu Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki

PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()

2014-11-05T20:06:16+00:00

acpi_pci_get_bridge_handle() returns the ACPI handle for the bridge device (either a host bridge or a PCI-to-PCI bridge) leading to a PCI bus. But SR-IOV virtual functions can be on a virtual bus with no bridge leading to it. Return a NULL acpi_handle in this case instead of trying to dereference the NULL pointer to the bridge. This fixes a NULL pointer dereference oops in pci_get_hp_params() when adding SR-IOV VF devices on virtual buses. [bhelgaas: changelog, add comment in code] Fixes: 6cd33649fa83 ("PCI: Add pci_configure_device() during enumeration") Link: https://bugzilla.kernel.org/show_bug.cgi?id=87591 Reported-by: Chao Zhou Reported-by: Joerg Roedel Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas

ACPI / PM: Revork the handling of ACPI device wakeup notifications

2014-07-22T23:00:45+00:00

Since ACPI wakeup GPEs are going to be enabled during system suspend as well as for runtime wakeup by a subsequent patch and the same notify handlers will be used in both cases, rework the ACPI device wakeup notification framework so that the part specific to physical devices is always run asynchronously from the PM workqueue. This prevents runtime resume callbacks for those devices from being run during system suspend and resume which may not be appropriate, among other things. Also make ACPI device wakeup notification handling a bit more robust agaist subsequent removal of ACPI device objects, whould that ever happen, and create a wakeup source object for each ACPI device configured for wakeup so that wakeup notifications for those devices can wake up the system from the "freeze" sleep state. Signed-off-by: Rafael J. Wysocki

ACPI / hotplug / PCI: Rework acpiphp_check_host_bridge()

2014-02-06T16:31:52+00:00

Since the only existing caller of acpiphp_check_host_bridge(), which is acpi_pci_root_scan_dependent(), already has a struct acpi_device pointer needed to obtain the ACPIPHP context, it doesn't make sense to execute acpi_bus_get_device() on its handle in acpiphp_handle_to_bridge() just in order to get that pointer back. For this reason, modify acpiphp_check_host_bridge() to take a struct acpi_device pointer as its argument and rearrange the code accordingly. Signed-off-by: Rafael J. Wysocki Tested-by: Mika Westerberg

ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro

2013-11-14T22:17:21+00:00

Since DEVICE_ACPI_HANDLE() is now literally identical to ACPI_HANDLE(), replace it with the latter everywhere and drop its definition from include/acpi.h. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman

ACPI / PCI: Make bus registration and unregistration symmetric

2013-07-23T01:58:42+00:00

Since acpi_pci_slot_enumerate() and acpiphp_enumerate_slots() can get the ACPI device handle they need from bus->bridge, it is not necessary to pass that handle to them as an argument. Drop the second argument of acpi_pci_slot_enumerate() and acpiphp_enumerate_slots(), rework them to obtain the ACPI handle from bus->bridge and make acpi_pci_add_bus() and acpi_pci_remove_bus() entirely symmetrical. Tested-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki Acked-by: Yinghai Lu