BMC/Intel-BMC/linux.git/include/linux/mfd/arizona/pdata.h, branch dev-4.6

mfd: arizona: Add device tree binding to specify mono outputs

2016-01-11T07:33:16+00:00

Add device tree bindings to support specifying outputs from the chip as mono outputs. Whilst we are doing it change the out_mono pdata from a bool to an int, because Sparse gets upset about using ARRAY_SIZE on bools. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones

mfd: arizona: Add register bits for general purpose switch

2015-09-22T06:23:59+00:00

The switch is typically used in conjunction with the MICDET clamp in order to suppress pops and clicks associated with jack insertion. Signed-off-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Chanwoo Choi

mfd: arizona: Add registers for ADC microphone detection

2015-09-22T06:23:59+00:00

The newer devices support using a software comparison to determine whether a 3/4 pole jack is present. Add the registers necessary for this. Signed-off-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Chanwoo Choi

mfd: arizona: Add support for WM8998 and WM1814

2015-08-11T14:08:42+00:00

Signed-off-by: Richard Fitzgerald Signed-off-by: Lee Jones

mfd: arizona: Update several pdata members to unsigned

2015-08-11T14:08:40+00:00

Device tree and ACPI primarily deal with unsigned ints, many of the pdata members in the Arizona driver are signed ints but are only ever assigned positive values. Changing these pdata fields to unsigned ints avoids us having to choose between overly verbose code and Sparse warnings. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones

Merge tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2015-06-26T21:51:15+00:00

Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver pull request for 4.2-rc1. Lots of mei, extcon, coresight, uio, mic, and other driver updates in here. Full details in the shortlog. All of these have been in linux-next for some time with no reported problems" * tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits) mei: me: wait for power gating exit confirmation mei: reset flow control on the last client disconnection MAINTAINERS: mei: add mei_cl_bus.h to maintained file list misc: sram: sort and clean up included headers misc: sram: move reserved block logic out of probe function misc: sram: add private struct device and virt_base members misc: sram: report correct SRAM pool size misc: sram: bump error message level on unclean driver unbinding misc: sram: fix device node reference leak on error misc: sram: fix enabled clock leak on error path misc: mic: Fix reported static checker warning misc: mic: Fix randconfig build error by including errno.h uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config uio: pruss: Add CONFIG_HAS_IOMEM dependence uio: pruss: Include extcon: Redefine the unique id of supported external connectors without 'enum extcon' type char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration(). Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion parport: check exclusive access before register w1: use correct lock on error in w1_seq_show() ...

mfd: arizona: Split INx_MODE into two fields

2015-06-22T11:25:16+00:00

Later arizona silicon has the single/differential selector in a different register, and IN1_MODE only selects between analogue or digital. Prepare for this by splitting the INx_MODE definition into two fields. Signed-off-by: Richard Fitzgerald Signed-off-by: Lee Jones

extcon: arizona: Add support for select accessory detect mode when headphone detection

2015-05-19T07:39:05+00:00

This patch add support for select accessory detect mode to HPDETL or HPDETR. Arizona provides a headphone detection circuit on the HPDETL and HPDETR pins to measure the impedance of an external load connected to the headphone. Depending on board design, headphone detect pins can change to HPDETR or HPDETL. Signed-off-by: Inha Song Acked-by: Lee Jones Acked-by: Charles Keepax Signed-off-by: Chanwoo Choi

mfd: arizona: Correct type of gpio_defaults

2015-03-30T09:06:29+00:00

gpio_defaults needs to be specified as an unsigned int rather than an int, because the intention of the DT binding is that all out of range values for a 16-bit register will cause the defaults to be used, however, if gpio_defaults is an int then values that are larger than INT_MAX will become negative numbers and be written out directly to the hardware. As no where in the code replies on gpio_defaults being an int, the simplest fix is to just change it to unsigned. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones

mfd: arizona: Move useful defines into a dt-binding include

2015-03-03T16:41:24+00:00

Move parts of linux/mfd/arizona/pdata.h and gpio.h into a new file in the dt-binding directory for use by device tree bindings. This also makes gpio.h redundant so remove it in the process. Signed-off-by: Charles Keepax Acked-by: Mark Brown Acked-by: Rob Herring Signed-off-by: Lee Jones