BMC/Intel-BMC/linux.git/include/linux/irqdomain.h, branch dev-4.10

Merge branch 'irq/for-block' into irq/core

2016-07-04T10:26:05+00:00

Pull the irq affinity managing code which is in a seperate branch for block developers to pull.

genirq: Add affinity hint to irq allocation

2016-07-04T10:25:13+00:00

Add an extra argument to the irq(domain) allocation functions, so we can hand down affinity hints to the allocator. Thats necessary to implement proper support for multiqueue devices. Signed-off-by: Thomas Gleixner Cc: Christoph Hellwig Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-4-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner

irqdomain: Don't set type when mapping an IRQ

2016-06-13T10:53:51+00:00

Some IRQ chips, such as GPIO controllers or secondary level interrupt controllers, may require require additional runtime power management control to ensure they are accessible. For such IRQ chips, it makes sense to enable the IRQ chip when interrupts are requested and disabled them again once all interrupts have been freed. When mapping an IRQ, the IRQ type settings are read and then programmed. The mapping of the IRQ happens before the IRQ is requested and so the programming of the type settings occurs before the IRQ is requested. This is a problem for IRQ chips that require additional power management control because they may not be accessible yet. Therefore, when mapping the IRQ, don't program the type settings, just save them and then program these saved settings when the IRQ is requested (so long as if they are not overridden via the call to request the IRQ). Add a stub function for irq_domain_free_irqs() to avoid any compilation errors when CONFIG_IRQ_DOMAIN_HIERARCHY is not selected. Signed-off-by: Jon Hunter Reviewed-by: Marc Zyngier Signed-off-by: Marc Zyngier

irqdomain: Allow domain matching on irq_fwspec

2016-05-02T11:42:50+00:00

When iterating over the irq domain list, we try to match a domain either by calling a match() function or by comparing a number of fields passed as parameters. Both approaches are a bit restrictive: - match() is DT specific and only takes a device node - the fallback case only deals with the fwnode_handle It would be useful if we had a per-domain function that would actually perform the matching check on the whole of the irq_fwspec structure. This would allow for a domain to triage matching attempts that need to extend beyond the fwnode. Let's introduce irq_find_matching_fwspec(), which takes a full blown irq_fwspec structure, and call into a select() function implemented by the irqdomain. irq_find_matching_fwnode() is made a wrapper around irq_find_matching_fwspec in order to preserve compatibility. Signed-off-by: Marc Zyngier Cc: Mark Rutland Cc: devicetree@vger.kernel.org Cc: Jason Cooper Cc: Will Deacon Cc: Rob Herring Link: http://lkml.kernel.org/r/1460365075-7316-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner

genirq: Add error code reporting to irq_{reserve,destroy}_ipi

2016-05-02T11:42:50+00:00

Make these functions return appropriate error codes when something goes wrong. Previously irq_destroy_ipi returned void making it impossible to notify the caller if the request could not be fulfilled. Patch 1 in the series added another condition in which this could fail in addition to the existing ones. irq_reserve_ipi returned an unsigned int meaning it could only return 0 on failure and give the caller no indication as to why the request failed. As time goes on there are likely to be further conditions added in which these functions can fail. These APIs and the IPI IRQ domain are new in 4.6 and the number of existing call sites are low, changing the API now has little impact on the code, while making it easier for these functions to grow over time. Signed-off-by: Matt Redfearn Cc: linux-mips@linux-mips.org Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: ralf@linux-mips.org Cc: Qais Yousef Cc: lisa.parratt@imgtec.com Cc: jiang.liu@linux.intel.com Link: http://lkml.kernel.org/r/1461568464-31701-2-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner

genirq: Make irq_destroy_ipi take a cpumask of IPIs to destroy

2016-05-02T11:42:50+00:00

Previously irq_destroy_ipi() would destroy IPIs to all CPUs that were configured by irq_reserve_ipi(). This change makes it possible to destroy just a subset of the IPIs. This may be useful to remove IPIs to CPUs that have been hot removed so that the IRQ numbers allocated within the IPI domain can be re-used. The original behaviour is restored by passing the complete mask that the IPI was created with. There are currently no users of this function that would break from the API change. Signed-off-by: Matt Redfearn Cc: linux-mips@linux-mips.org Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: ralf@linux-mips.org Cc: Qais Yousef Cc: lisa.parratt@imgtec.com Cc: jiang.liu@linux.intel.com Link: http://lkml.kernel.org/r/1461568464-31701-1-git-send-email-matt.redfearn@imgtec.com Signed-off-by: Thomas Gleixner

Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2016-03-18T05:13:41+00:00

Pull staging driver updates from Greg KH: "Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notable is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits) staging: lustre: fix aligments in lnet selftest staging: lustre: report minimum of two buffers for LNet selftest load test staging: lustre: test for proper errno code in lstcon_rpc_trans_abort staging: lustre: filter remaining extra spacing for lnet selftest staging: lustre: remove extra spacing when setting variable for lnet selftest staging: lustre: remove extra spacing of variable declartions for lnet selftest staging: lustre: fix spacing issues checkpatch reported in lnet selftest staging: lustre: remove returns in void function for lnet selftest staging: lustre: fix bogus lst errors for lnet selftest staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc staging: android: ion: fix up file mode staging: ion: debugfs invalid gfp mask staging: rts5208: Replace pci_enable_device with pcim_enable_device Staging: ieee80211: Place constant on right side of the test. staging: speakup: Replace del_timer with del_timer_sync staging: lowmemorykiller: fix 2 checks that checkpatch complained staging: mt29f_spinand: Drop void pointer cast staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED ...

genirq: Add a new generic IPI reservation code to irq core

2016-02-25T09:56:56+00:00

Add a generic mechanism to dynamically allocate an IPI. Depending on the underlying implementation this creates either a single Linux irq or a consective range of Linux irqs. The Linux irq is used later to send IPIs to other CPUs. [ tglx: Massaged the code and removed the 'consecutive mask' restriction for the single IRQ case ] Signed-off-by: Qais Yousef Cc: Cc: Cc: Cc: Cc: Cc: Cc: Qais Yousef Link: http://lkml.kernel.org/r/1449580830-23652-9-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner

genirq: Make irq_domain_alloc_descs() non static

2016-02-25T09:56:56+00:00

We will need to use this function to implement irq_reserve_ipi() later. So make it non static and move the prototype to irqdomain.h to allow using it outside irqdomain.c Signed-off-by: Qais Yousef Cc: Cc: Cc: Cc: Cc: Cc: Cc: Qais Yousef Link: http://lkml.kernel.org/r/1449580830-23652-8-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner

genirq: Add DOMAIN_BUS_IPI

2016-02-25T09:56:55+00:00

We need a way to search and match IPI domains. Using the new enum we can use irq_find_matching_host() to do that. Signed-off-by: Qais Yousef Cc: Cc: Cc: Cc: Cc: Cc: Cc: Qais Yousef Link: http://lkml.kernel.org/r/1449580830-23652-3-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner