BMC/Intel-BMC/linux.git/include/linux/cgroup-defs.h, branch dev-4.17

Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq

2018-04-04T01:00:13+00:00

Pull workqueue updates from Tejun Heo: "rcu_work addition and a couple trivial changes" * 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: remove the comment about the old manager_arb mutex workqueue: fix the comments of nr_idle fs/aio: Use rcu_work instead of explicit rcu and work item cgroup: Use rcu_work instead of explicit rcu and work item RCU, workqueue: Implement rcu_work

cgroup: Use rcu_work instead of explicit rcu and work item

2018-03-19T17:12:03+00:00

Workqueue now has rcu_work. Use it instead of open-coding rcu -> work item bouncing. Signed-off-by: Tejun Heo

net: use skb_to_full_sk() in skb_update_prio()

2018-03-14T16:53:23+00:00

Andrei Vagin reported a KASAN: slab-out-of-bounds error in skb_update_prio() Since SYNACK might be attached to a request socket, we need to get back to the listener socket. Since this listener is manipulated without locks, add const qualifiers to sock_cgroup_prioidx() so that the const can also be used in skb_update_prio() Also add the const qualifier to sock_cgroup_classid() for consistency. Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by: Eric Dumazet Reported-by: Andrei Vagin Signed-off-by: David S. Miller

cgroup: Update documentation reference

2018-01-02T14:59:52+00:00

The cgroup_subsys structure references a documentation file that has been renamed after the v1/v2 split. Since the v2 documentation doesn't currently contain any information on kernel interfaces for controllers, point the user to the v1 docs. Cc: Tejun Heo Cc: linux-doc@vger.kernel.org Signed-off-by: Matt Roper Signed-off-by: Tejun Heo

Merge branch 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

2017-11-15T22:29:44+00:00

Pull cgroup updates from Tejun Heo: "Cgroup2 cpu controller support is finally merged. - Basic cpu statistics support to allow monitoring by default without the CPU controller enabled. - cgroup2 cpu controller support. - /sys/kernel/cgroup files to help dealing with new / optional features" * 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: export list of cgroups v2 features using sysfs cgroup: export list of delegatable control files using sysfs cgroup: mark @cgrp __maybe_unused in cpu_stat_show() MAINTAINERS: relocate cpuset.c cgroup, sched: Move basic cpu stats from cgroup.stat to cpu.stat sched: Implement interface for cgroup unified hierarchy sched: Misc preps for cgroup unified hierarchy interface sched/cputime: Add dummy cputime_adjust() implementation for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE cgroup: statically initialize init_css_set->dfl_cgrp cgroup: Implement cgroup2 basic CPU usage accounting cpuacct: Introduce cgroup_account_cputime[_field]() sched/cputime: Expose cputime_adjust()

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

cgroup, sched: Move basic cpu stats from cgroup.stat to cpu.stat

2017-10-26T17:56:33+00:00

The basic cpu stat is currently shown with "cpu." prefix in cgroup.stat, and the same information is duplicated in cpu.stat when cpu controller is enabled. This is ugly and not very scalable as we want to expand the coverage of stat information which is always available. This patch makes cgroup core always create "cpu.stat" file and show the basic cpu stat there and calls the cpu controller to show the extra stats when enabled. This ensures that the same information isn't presented in multiple places and makes future expansion of basic stats easier. Signed-off-by: Tejun Heo Acked-by: Peter Zijlstra (Intel)

cgroup: Implement cgroup2 basic CPU usage accounting

2017-09-25T15:12:05+00:00

In cgroup1, while cpuacct isn't actually controlling any resources, it is a separate controller due to combination of two factors - 1. enabling cpu controller has significant side effects, and 2. we have to pick one of the hierarchies to account CPU usages on. cpuacct controller is effectively used to designate a hierarchy to track CPU usages on. cgroup2's unified hierarchy removes the second reason and we can account basic CPU usages by default. While we can use cpuacct for this purpose, both its interface and implementation leave a lot to be desired - it collects and exposes two sources of truth which don't agree with each other and some of the exposed statistics don't make much sense. Also, it propagates all the way up the hierarchy on each accounting event which is unnecessary. This patch adds basic resource accounting mechanism to cgroup2's unified hierarchy and accounts CPU usages using it. * All accountings are done per-cpu and don't propagate immediately. It just bumps the per-cgroup per-cpu counters and links to the parent's updated list if not already on it. * On a read, the per-cpu counters are collected into the global ones and then propagated upwards. Only the per-cpu counters which have changed since the last read are propagated. * CPU usage stats are collected and shown in "cgroup.stat" with "cpu." prefix. Total usage is collected from scheduling events. User/sys breakdown is sourced from tick sampling and adjusted to the usage using cputime_adjust(). This keeps the accounting side hot path O(1) and per-cpu and the read side O(nr_updated_since_last_read). v2: Minor changes and documentation updates as suggested by Waiman and Roman. Signed-off-by: Tejun Heo Acked-by: Peter Zijlstra Cc: Ingo Molnar Cc: Li Zefan Cc: Johannes Weiner Cc: Waiman Long Cc: Roman Gushchin

cgroup: Add mount flag to enable cpuset to use v2 behavior in v1 cgroup

2017-08-18T15:24:21+00:00

A new mount option "cpuset_v2_mode" is added to the v1 cgroupfs filesystem to enable cpuset controller to use v2 behavior in a v1 cgroup. This mount option applies only to cpuset controller and have no effect on other controllers. Signed-off-by: Waiman Long Signed-off-by: Tejun Heo

cgroup: implement hierarchy limits

2017-08-02T19:05:20+00:00

Creating cgroup hierearchies of unreasonable size can affect overall system performance. A user might want to limit the size of cgroup hierarchy. This is especially important if a user is delegating some cgroup sub-tree. To address this issue, introduce an ability to control the size of cgroup hierarchy. The cgroup.max.descendants control file allows to set the maximum allowed number of descendant cgroups. The cgroup.max.depth file controls the maximum depth of the cgroup tree. Both are single value r/w files, with "max" default value. The control files exist on each hierarchy level (including root). When a new cgroup is created, we check the total descendants and depth limits on each level, and if none of them are exceeded, a new cgroup is created. Only alive cgroups are counted, removed (dying) cgroups are ignored. Signed-off-by: Roman Gushchin Suggested-by: Tejun Heo Signed-off-by: Tejun Heo Cc: Zefan Li Cc: Waiman Long Cc: Johannes Weiner Cc: kernel-team@fb.com Cc: cgroups@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org