BMC/Intel-BMC/linux.git/include/linux/arch_topology.h, branch dev-5.8-intel

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2020-03-31T17:05:01+00:00

Pull arm64 updates from Catalin Marinas: "The bulk is in-kernel pointer authentication, activity monitors and lots of asm symbol annotations. I also queued the sys_mremap() patch commenting the asymmetry in the address untagging. Summary: - In-kernel Pointer Authentication support (previously only offered to user space). - ARM Activity Monitors (AMU) extension support allowing better CPU utilisation numbers for the scheduler (frequency invariance). - Memory hot-remove support for arm64. - Lots of asm annotations (SYM_*) in preparation for the in-kernel Branch Target Identification (BTI) support. - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU init callbacks, support for new DT compatibles. - IPv6 header checksum optimisation. - Fixes: SDEI (software delegated exception interface) double-lock on hibernate with shared events. - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm() converted to C, cpufeature finalisation helper. - sys_mremap() comment explaining the asymmetric address untagging behaviour" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits) mm/mremap: Add comment explaining the untagging behaviour of mremap() arm64: head: Convert install_el2_stub to SYM_INNER_LABEL arm64: Introduce get_cpu_ops() helper function arm64: Rename cpu_read_ops() to init_cpu_ops() arm64: Declare ACPI parking protocol CPU operation if needed arm64: move kimage_vaddr to .rodata arm64: use mov_q instead of literal ldr arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH lkdtm: arm64: test kernel pointer authentication arm64: compile the kernel with ptrauth return address signing kconfig: Add support for 'as-option' arm64: suspend: restore the kernel ptrauth keys arm64: __show_regs: strip PAC from lr in printk arm64: unwind: strip PAC from kernel addresses arm64: mask PAC bits of __builtin_return_address arm64: initialize ptrauth keys for kernel booting task arm64: initialize and switch ptrauth kernel keys arm64: enable ptrauth earlier arm64: cpufeature: handle conflicts based on capability arm64: cpufeature: Move cpu capability helpers inside C file ...

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-03-31T00:01:51+00:00

Pull scheduler updates from Ingo Molnar: "The main changes in this cycle are: - Various NUMA scheduling updates: harmonize the load-balancer and NUMA placement logic to not work against each other. The intended result is better locality, better utilization and fewer migrations. - Introduce Thermal Pressure tracking and optimizations, to improve task placement on thermally overloaded systems. - Implement frequency invariant scheduler accounting on (some) x86 CPUs. This is done by observing and sampling the 'recent' CPU frequency average at ~tick boundaries. The CPU provides this data via the APERF/MPERF MSRs. This hopefully makes our capacity estimates more precise and keeps tasks on the same CPU better even if it might seem overloaded at a lower momentary frequency. (As usual, turbo mode is a complication that we resolve by observing the maximum frequency and renormalizing to it.) - Add asymmetric CPU capacity wakeup scan to improve capacity utilization on asymmetric topologies. (big.LITTLE systems) - PSI fixes and optimizations. - RT scheduling capacity awareness fixes & improvements. - Optimize the CONFIG_RT_GROUP_SCHED constraints code. - Misc fixes, cleanups and optimizations - see the changelog for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits) threads: Update PID limit comment according to futex UAPI change sched/fair: Fix condition of avg_load calculation sched/rt: cpupri_find: Trigger a full search as fallback kthread: Do not preempt current task if it is going to call schedule() sched/fair: Improve spreading of utilization sched: Avoid scale real weight down to zero psi: Move PF_MEMSTALL out of task->flags MAINTAINERS: Add maintenance information for psi psi: Optimize switching tasks inside shared cgroups psi: Fix cpu.pressure for cpu.max and competing cgroups sched/core: Distribute tasks within affinity masks sched/fair: Fix enqueue_task_fair warning thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code sched/rt: Remove unnecessary push for unfit tasks sched/rt: Allow pulling unfitting task sched/rt: Optimize cpupri_find() on non-heterogenous systems sched/rt: Re-instate old behavior in select_task_rq_rt() sched/rt: cpupri_find: Implement fallback mechanism for !fit case sched/fair: Fix reordering of enqueue/dequeue_task_fair() sched/fair: Fix runnable_avg for throttled cfs ...

arm64: use activity monitors for frequency invariance

2020-03-06T16:02:50+00:00

The Frequency Invariance Engine (FIE) is providing a frequency scaling correction factor that helps achieve more accurate load-tracking. So far, for arm and arm64 platforms, this scale factor has been obtained based on the ratio between the current frequency and the maximum supported frequency recorded by the cpufreq policy. The setting of this scale factor is triggered from cpufreq drivers by calling arch_set_freq_scale. The current frequency used in computation is the frequency requested by a governor, but it may not be the frequency that was implemented by the platform. This correction factor can also be obtained using a core counter and a constant counter to get information on the performance (frequency based only) obtained in a period of time. This will more accurately reflect the actual current frequency of the CPU, compared with the alternative implementation that reflects the request of a performance level from the OS. Therefore, implement arch_scale_freq_tick to use activity monitors, if present, for the computation of the frequency scale factor. The use of AMU counters depends on: - CONFIG_ARM64_AMU_EXTN - depents on the AMU extension being present - CONFIG_CPU_FREQ - the current frequency obtained using counter information is divided by the maximum frequency obtained from the cpufreq policy. While it is possible to have a combination of CPUs in the system with and without support for activity monitors, the use of counters for frequency invariance is only enabled for a CPU if all related CPUs (CPUs in the same frequency domain) support and have enabled the core and constant activity monitor counters. In this way, there is a clear separation between the policies for which arch_set_freq_scale (cpufreq based FIE) is used, and the policies for which arch_scale_freq_tick (counter based FIE) is used to set the frequency scale factor. For this purpose, a late_initcall_sync is registered to trigger validation work for policies that will enable or disable the use of AMU counters for frequency invariance. If CONFIG_CPU_FREQ is not defined, the use of counters is enabled on all CPUs only if all possible CPUs correctly support the necessary counters. Signed-off-by: Ionela Voinescu Reviewed-by: Lukasz Luba Acked-by: Sudeep Holla Cc: Sudeep Holla Cc: Will Deacon Cc: Catalin Marinas Signed-off-by: Catalin Marinas

drivers/base/arch_topology: Add infrastructure to store and update instantaneous thermal pressure

2020-03-06T11:57:18+00:00

Add architecture specific APIs to update and track thermal pressure on a per CPU basis. A per CPU variable thermal_pressure is introduced to keep track of instantaneous per CPU thermal pressure. Thermal pressure is the delta between maximum capacity and capped capacity due to a thermal event. topology_get_thermal_pressure can be hooked into the scheduler specified arch_scale_thermal_pressure to retrieve instantaneous thermal pressure of a CPU. arch_set_thermal_pressure can be used to update the thermal pressure. Considering topology_get_thermal_pressure reads thermal_pressure and arch_set_thermal_pressure writes into thermal_pressure, one can argue for some sort of locking mechanism to avoid a stale value. But considering topology_get_thermal_pressure can be called from a system critical path like scheduler tick function, a locking mechanism is not ideal. This means that it is possible the thermal_pressure value used to calculate average thermal pressure for a CPU can be stale for up to 1 tick period. Signed-off-by: Thara Gopinath Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Link: https://lkml.kernel.org/r/20200222005213.3873-4-thara.gopinath@linaro.org

drivers base/arch_topology: Reformat topology_get_[cpu/freq]_scale() function name

2020-02-14T17:18:54+00:00

The storage class and inline definition as well as the return type, function name and parameter list fit all into one line. Signed-off-by: Dietmar Eggemann Reviewed-by: Sudeep Holla Link: https://lore.kernel.org/r/20200211181515.32570-3-dietmar.eggemann@arm.com Signed-off-by: Greg Kroah-Hartman

drivers base/arch_topology: Remove 'struct sched_domain' forward declaration

2020-02-14T17:18:54+00:00

The sched domain pointer argument from topology_get_freq_scale() and topology_get_cpu_scale() got removed by commit 7673c8a4c75d ("sched/cpufreq: Remove arch_scale_freq_capacity()'s 'sd' parameter") and commit 8ec59c0f5f49 ("sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()"). So the 'struct sched_domain' forward declaration is no longer needed. Remove it. Signed-off-by: Dietmar Eggemann Reviewed-by: Sudeep Holla Link: https://lore.kernel.org/r/20200211181515.32570-2-dietmar.eggemann@arm.com Signed-off-by: Greg Kroah-Hartman

cpu-topology: declare parse_acpi_topology in

2019-11-14T04:31:00+00:00

The parse_acpi_topology() is not declared anywhere which causes the following sparse warning: drivers/base/arch_topology.c:522:19: warning: symbol 'parse_acpi_topology' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) Acked-by: Sudeep Holla Link: https://lore.kernel.org/r/20191022084323.13594-1-ben.dooks@codethink.co.uk Signed-off-by: Greg Kroah-Hartman

arm: Use common cpu_topology structure and functions.

2019-07-22T16:36:18+00:00

Currently, ARM32 and ARM64 uses different data structures to represent their cpu topologies. Since, we are moving the ARM64 topology to common code to be used by other architectures, we can reuse that for ARM32 as well. Take this opprtunity to remove the redundant functions from ARM32 and reuse the common code instead. To: Russell King Signed-off-by: Atish Patra Tested-by: Sudeep Holla (on TC2) Reviewed-by: Sudeep Holla Signed-off-by: Paul Walmsley

cpu-topology: Move cpu topology code to common code.

2019-07-22T16:36:06+00:00

Both RISC-V & ARM64 are using cpu-map device tree to describe their cpu topology. It's better to move the relevant code to a common place instead of duplicate code. To: Will Deacon To: Catalin Marinas Signed-off-by: Atish Patra [Tested on QDF2400] Tested-by: Jeffrey Hugo [Tested on Juno and other embedded platforms.] Tested-by: Sudeep Holla Reviewed-by: Sudeep Holla Acked-by: Will Deacon Acked-by: Greg Kroah-Hartman Signed-off-by: Paul Walmsley

sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()

2019-06-24T17:23:39+00:00

The 'struct sched_domain *sd' parameter to arch_scale_cpu_capacity() is unused since commit: 765d0af19f5f ("sched/topology: Remove the ::smt_gain field from 'struct sched_domain'") Remove it. Signed-off-by: Vincent Guittot Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Viresh Kumar Reviewed-by: Valentin Schneider Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: gregkh@linuxfoundation.org Cc: linux@armlinux.org.uk Cc: quentin.perret@arm.com Cc: rafael@kernel.org Link: https://lkml.kernel.org/r/1560783617-5827-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar