BMC/Intel-BMC/linux.git/include/dt-bindings/clock, branch dev-5.8-intel

Fix reset index of LPC and eSPI

2021-01-13T20:21:36+00:00

AST2600 A1 has separate reset control for LPC and eSPI so this commit fix the index definition to make it work on AST2600 A1. Change-Id: Ied8f96740b6df802a65313fde369e79386557903 Signed-off-by: Jae Hyun Yoo

enable AST2600 I3C

2020-10-09T21:47:19+00:00

This commit ports I3C related changes from Aspeed SDK v00.05.05. It also includes Vitor's I3C cdev implementation which isn't upstreamed yet so it should be refined later. Signed-off-by: Ryan Chen Signed-off-by: Vitor Soares Signed-off-by: Jae Hyun Yoo

ast2600: enable high speed uart in kernel.

2020-10-09T21:47:19+00:00

Tested: 1. Config baud rate to 921600 in BIOS setup page 2. BMC could change env variable "hostserialcfg" to 1. 3. BMC is force to reboot and SPA baud rate is changed to 921600 successfully. 4. It is same for back to 115200. Signed-off-by: Kuiying Wang

Add high speed baud rate support for UART

2020-10-05T22:24:25+00:00

In order to support high speed baud rate(921600 bps), the default UART clock(24MHz) needs to be switched to 192MHz(from USB2.0 port1 PHY). Create a new 192M Hz clock and assign it to uart, based on uart clock source configuration in SCU4C. bootloader(u-boot) will set SCU4C based on the environment configuration Signed-off-by: Yong Li

Add AST2500 eSPI driver

2020-10-05T22:24:25+00:00

When PCH works under eSPI mode, the PMC (Power Management Controller) in PCH is waiting for SUS_ACK from BMC after it alerts SUS_WARN. It is in dead loop if no SUS_ACK assert. This is the basic requirement for the BMC works as eSPI slave. Also for the host power on / off actions, from BMC side, the following VW (Virtual Wire) messages are done in firmware: 1. SLAVE_BOOT_LOAD_DONE / SLAVE_BOOT_LOAD_STATUS 2. SUS_ACK 3. OOB_RESET_ACK 4. HOST_RESET_ACK Also, it provides monitoring interface of PLTRST_N signal through /dev/espi-pltrstn Signed-off-by: Haiyue Wang Signed-off-by: Jae Hyun Yoo Signed-off-by: James Feist Signed-off-by: Vernon Mauery

arm: dts: base aspeed g6 dtsi fixups

2020-10-05T22:24:25+00:00

Additions to the base g6 dtsi file for Aspeed ast2600 systems. This mostly includes entries for the drivers that are not upstream. Signed-off-by: Vernon Mauery

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2020-06-10T18:42:19+00:00

Pull clk updates from Stephen Boyd: "This time around we have four lines of diff in the core framework, removing a function that isn't used anymore. Otherwise the main new thing for the common clk framework is that it is selectable in the Kconfig language now. Hopefully this will let clk drivers and clk consumers be testable on more than the architectures that support the clk framework. The goal is to introduce some Kunit tests for the framework. Outside of the core framework we have the usual set of various driver updates and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the largest addition this time around in terms of lines of code. After that the x86 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or upcoming SoCs. After that the dirstat shows the usual suspects working on their SoC support by fixing minor bugs, correcting data and converting some of their DT bindings to YAML. Core: - Allow the COMMON_CLK config to be selectable New Drivers: - Clk driver for Baikal-T1 SoCs - Mediatek MT6765 clock support - Support for Intel Agilex clks - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for the new Renesas RZ/G1H (R8A7742) SoC - Add support for Qualcomm's MSM8939 Generic Clock Controller Updates: - Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips - Support custom flags in Xilinx zynq firmware - Various small fixes to the Xilinx clk driver - A single minor rounding fix for the legacy Allwinner clock support - A few patches from Abel Vesa as preparation of adding audiomix clock support on i.MX - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3 drivers - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on aarch64 hardware - A series from Peng Fan to improve i.MX8M clock drivers, using composite clock for core and bus clk slice - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined bit rates - A couple changes for EMC frequency scaling on Tegra210 - Support for CPU frequency scaling on Tegra20/Tegra30 - New clk gate for CSI test pattern generator on Tegra210 - Regression fixes for Samsung exynos542x and exynos5433 SoCs - Use of fallthrough; attribute for Samsung s3c24xx - Updates and fixup HDMI and video clocks on Meson8b - Fixup reset polarity on Meson8b - Fix GPU glitch free mux switch on Meson gx and g12 - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2 - Two more conversions of Renesas DT bindings to json-schema - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits) clk: mediatek: Remove ifr{0,1}_cfg_regs structures clk: baikal-t1: remove redundant assignment to variable 'divider' clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible" dt-bindings: clock: Add a missing include to MMP Audio Clock binding dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first clk: clk-si5341: Add support for the Si5345 series ...

Merge branches 'clk-vc5', 'clk-hsdk', 'clk-mediatek' and 'clk-baikal' into clk-next

2020-06-01T20:00:56+00:00

- Support IDT VersaClock 5P49V5925 - Bunch of updates for HSDK clock generation unit (CGU) driver - New clk driver for Baikal-T1 SoCs * clk-vc5: dt: Add bindings for IDT VersaClock 5P49V5925 clk: vc5: Add support for IDT VersaClock 5P49V6965 * clk-hsdk: CLK: HSDK: CGU: add support for 148.5MHz clock CLK: HSDK: CGU: support PLL bypassing CLK: HSDK: CGU: check if PLL is bypassed first * clk-mediatek: clk: mediatek: assign the initial value to clk_init_data of mtk_mux clk: mediatek: Add MT6765 clock support clk: mediatek: add mt6765 clock IDs dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC * clk-baikal: clk: Add Baikal-T1 CCU Dividers driver clk: Add Baikal-T1 CCU PLLs driver dt-bindings: clk: Add Baikal-T1 CCU Dividers binding dt-bindings: clk: Add Baikal-T1 CCU PLLs binding

Merge branches 'clk-mmp', 'clk-intel', 'clk-ingenic', 'clk-qcom' and 'clk-silabs' into clk-next

2020-06-01T20:00:28+00:00

- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs - Add support for X1830 and X1000 Ingenic SoC clk controllers - Add support for Qualcomm's MSM8939 Generic Clock Controller - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver - Enable supply regulators for GPU gdscs on Qualcomm SoCs - Add support for Si5342, Si5344 and Si5345 chips * clk-mmp: clk: mmp2: Add audio clock controller driver dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding clk: mmp2: Add support for power islands dt-bindings: marvell,mmp2: Add ids for the power domains dt-bindings: clock: Make marvell,mmp2-clock a power controller clk: mmp2: Add the audio clock clk: mmp2: Add the I2S clocks clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init() clk: mmp2: Move thermal register defines up a bit dt-bindings: marvell,mmp2: Add clock id for the Audio clock dt-bindings: marvell,mmp2: Add clock id for the I2S clocks clk: mmp: frac: Allow setting bits other than the numerator/denominator clk: mmp: frac: Do not lose last 4 digits of precision * clk-intel: clk: intel: remove redundant initialization of variable rate64 clk: intel: Add CGU clock driver for a new SoC dt-bindings: clk: intel: Add bindings document & header file for CGU * clk-ingenic: clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused clk: X1000: Add FIXDIV for SSI clock of X1000. dt-bindings: clock: Add and reorder ABI for X1000. clk: Ingenic: Add CGU driver for X1830. dt-bindings: clock: Add X1830 clock bindings. clk: Ingenic: Adjust cgu code to make it compatible with X1830. clk: Ingenic: Remove unnecessary spinlock when reading registers. * clk-qcom: clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src dt-bindings: clock: Add YAML schemas for QCOM A53 PLL clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller clk: qcom: gcc: Add support for Secure control source clock dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID clk: qcom: gcc: Add support for a new frequency for SC7180 clk: qcom: Add DT bindings for MSM8939 GCC clk: qcom: gcc: Add missing UFS clocks for SM8150 clk: qcom: gcc: Add GPU and NPU clocks for SM8150 clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc clk: qcom: gdsc: Handle GDSC regulator supplies clk: qcom: msm8916: Fix the address location of pll->config_reg * clk-silabs: clk: clk-si5341: Add support for the Si5345 series

Merge branches 'clk-unisoc', 'clk-trivial', 'clk-bcm', 'clk-st' and 'clk-ast2600' into clk-next

2020-06-01T20:00:21+00:00

* clk-unisoc: clk: sprd: add mipi_csi_xx gate clocks clk: sprd: add dt-bindings include for mipi_csi_xx clocks dt-bindings: clk: sprd: add mipi_csi_xx clocks for SC9863A clk: sprd: check its parent status before reading gate clock clk: sprd: return correct type of value for _sprd_pll_recalc_rate clk: sprd: mark the local clock symbols static * clk-trivial: clk: versatile: remove redundant assignment to pointer clk clk: clk-xgene: Fix a typo in Kconfig clk: Remove unused inline function clk_debug_reparent * clk-bcm: clk: bcm2835: Constify struct debugfs_reg32 clk: bcm2835: Remove casting to bcm2835_clk_register clk: bcm2835: Fix return type of bcm2835_register_gate * clk-st: clk: clk-flexgen: fix clock-critical handling * clk-ast2600: clk: ast2600: Fix AHB clock divider for A1