BMC/Intel-BMC/linux.git/drivers, branch v4.17.9

PCI: hv: Disable/enable IRQs rather than BH in hv_compose_msi_msg()

2018-07-22T13:16:05+00:00

commit 35a88a18d7ea58600e11590405bc93b08e16e7f5 upstream. Commit de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()") uses local_bh_disable()/enable(), because hv_pci_onchannelcallback() can also run in tasklet context as the channel event callback, so bottom halves should be disabled to prevent a race condition. With CONFIG_PROVE_LOCKING=y in the recent mainline, or old kernels that don't have commit f71b74bca637 ("irq/softirqs: Use lockdep to assert IRQs are disabled/enabled"), when the upper layer IRQ code calls hv_compose_msi_msg() with local IRQs disabled, we'll see a warning at the beginning of __local_bh_enable_ip(): IRQs not enabled as expected WARNING: CPU: 0 PID: 408 at kernel/softirq.c:162 __local_bh_enable_ip The warning exposes an issue in de0aa7b2f97d: local_bh_enable() can potentially call do_softirq(), which is not supposed to run when local IRQs are disabled. Let's fix this by using local_irq_save()/restore() instead. Note: hv_pci_onchannelcallback() is not a hot path because it's only called when the PCI device is hot added and removed, which is infrequent. Fixes: de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()") Signed-off-by: Dexuan Cui Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Haiyang Zhang Cc: stable@vger.kernel.org Cc: Stephen Hemminger Cc: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman

net: lan78xx: Fix race in tx pending skb size calculation

2018-07-22T13:16:05+00:00

commit dea39aca1d7aef1e2b95b07edeacf04cc8863a2e upstream. The skb size calculation in lan78xx_tx_bh is in race with the start_xmit, which could lead to rare kernel oopses. So protect the whole skb walk with a spin lock. As a benefit we can unlink the skb directly. This patch was tested on Raspberry Pi 3B+ Link: https://github.com/raspberrypi/linux/issues/2608 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Cc: stable Signed-off-by: Floris Bos Signed-off-by: Stefan Wahren Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl8821ae: fix firmware is not ready to run

2018-07-22T13:16:05+00:00

commit 9a98302de19991d51e067b88750585203b2a3ab6 upstream. Without this patch, firmware will not run properly on rtl8821ae, and it causes bad user experience. For example, bad connection performance with low rate, higher power consumption, and so on. rtl8821ae uses two kinds of firmwares for normal and WoWlan cases, and each firmware has firmware data buffer and size individually. Original code always overwrite size of normal firmware rtlpriv->rtlhal.fwsize, and this mismatch causes firmware checksum error, then firmware can't start. In this situation, driver gives message "Firmware is not ready to run!". Fixes: fe89707f0afa ("rtlwifi: rtl8821ae: Simplify loading of WOWLAN firmware") Signed-off-by: Ping-Ke Shih Cc: Stable # 4.0+ Reviewed-by: Larry Finger Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

rtlwifi: Fix kernel Oops "Fw download fail!!"

2018-07-22T13:16:04+00:00

commit 12dfa2f68ab659636e092db13b5d17cf9aac82af upstream. When connecting to AP, mac80211 asks driver to enter and leave PS quickly, but driver deinit doesn't wait for delayed work complete when entering PS, then driver reinit procedure and delay work are running simultaneously. This will cause unpredictable kernel oops or crash like rtl8723be: error H2C cmd because of Fw download fail!!! WARNING: CPU: 3 PID: 159 at drivers/net/wireless/realtek/rtlwifi/ rtl8723be/fw.c:227 rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] CPU: 3 PID: 159 Comm: kworker/3:2 Tainted: G O 4.16.13-2-ARCH #1 Hardware name: ASUSTeK COMPUTER INC. X556UF/X556UF, BIOS X556UF.406 10/21/2016 Workqueue: rtl8723be_pci rtl_c2hcmd_wq_callback [rtlwifi] RIP: 0010:rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] RSP: 0018:ffffa6ab01e1bd70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa26069071520 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff8be70e9c RDI: 00000000ffffffff RBP: 0000000000000000 R08: 0000000000000048 R09: 0000000000000348 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffa26069071520 R14: 0000000000000000 R15: ffffa2607d205f70 FS: 0000000000000000(0000) GS:ffffa26081d80000(0000) knlGS:000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000443b39d3000 CR3: 000000037700a005 CR4: 00000000003606e0 Call Trace: ? halbtc_send_bt_mp_operation.constprop.17+0xd5/0xe0 [btcoexist] ? ex_btc8723b1ant_bt_info_notify+0x3b8/0x820 [btcoexist] ? rtl_c2hcmd_launcher+0xab/0x110 [rtlwifi] ? process_one_work+0x1d1/0x3b0 ? worker_thread+0x2b/0x3d0 ? process_one_work+0x3b0/0x3b0 ? kthread+0x112/0x130 ? kthread_create_on_node+0x60/0x60 ? ret_from_fork+0x35/0x40 Code: 00 76 b4 e9 e2 fe ff ff 4c 89 ee 4c 89 e7 e8 56 22 86 ca e9 5e ... This patch ensures all delayed works done before entering PS to satisfy our expectation, so use cancel_delayed_work_sync() instead. An exception is delayed work ips_nic_off_wq because running task may be itself, so add a parameter ips_wq to deinit function to handle this case. This issue is reported and fixed in below threads: https://github.com/lwfinger/rtlwifi_new/issues/367 https://github.com/lwfinger/rtlwifi_new/issues/366 Tested-by: Evgeny Kapun # 8723DE Tested-by: Shivam Kakkar # 8723BE on 4.18-rc1 Signed-off-by: Ping-Ke Shih Fixes: cceb0a597320 ("rtlwifi: Add work queue for c2h cmd.") Cc: Stable # 4.11+ Reviewed-by: Larry Finger Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

net: cxgb3_main: fix potential Spectre v1

2018-07-22T13:16:04+00:00

commit 676bcfece19f83621e905aa55b5ed2d45cc4f2d3 upstream. t.qset_idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:2286 cxgb_extension_ioctl() warn: potential spectre issue 'adapter->msix_info' Fix this by sanitizing t.qset_idx before using it to index adapter->msix_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

virtio_net: split XDP_TX kick and XDP_REDIRECT map flushing

2018-07-22T13:16:04+00:00

[ Upstream commit 2471c75efed32529698c26da499954f0253cb401 ] The driver was combining XDP_TX virtqueue_kick and XDP_REDIRECT map flushing (xdp_do_flush_map). This is suboptimal, these two flush operations should be kept separate. The suboptimal behavior was introduced in commit 9267c430c6b6 ("virtio-net: add missing virtqueue kick when flushing packets"). Fixes: 9267c430c6b6 ("virtio-net: add missing virtqueue kick when flushing packets") Signed-off-by: Jesper Dangaard Brouer Acked-by: Jason Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sfc: correctly initialise filter rwsem for farch

2018-07-22T13:16:04+00:00

[ Upstream commit cafb39600e7a73263122a0e2db052d691686378f ] Fixes: fc7a6c287ff3 ("sfc: use a semaphore to lock farch filters too") Suggested-by: Joseph Korty Signed-off-by: Bert Kenward Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

s390/qeth: fix race when setting MAC address

2018-07-22T13:16:04+00:00

[ Upstream commit 4789a21880488048105590049fc41a99f53d565d ] When qeth_l2_set_mac_address() finds the card in a non-reachable state, it merely copies the new MAC address into dev->dev_addr so that __qeth_l2_set_online() can later register it with the HW. But __qeth_l2_set_online() may very well be running concurrently, so we can't trust the card state without appropriate locking: If the online sequence is past the point where it registers dev->dev_addr (but not yet in SOFTSETUP state), any address change needs to be properly programmed into the HW. Otherwise the netdevice ends up with a different MAC address than what's set in the HW, and inbound traffic is not forwarded as expected. This is most likely to occur for OSD in LPAR, where commit 21b1702af12e ("s390/qeth: improve fallback to random MAC address") now triggers eg. systemd to immediately change the MAC when the netdevice is registered with a NET_ADDR_RANDOM address. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]

2018-07-22T13:16:03+00:00

[ Upstream commit 9d0a58fb9747afd27d490c02a97889a1b59f6be4 ] *ether_addr*_64bits functions have been introduced to optimize performance critical paths, which access 6-byte ethernet address as u64 value to get "nice" assembly. A harmless hack works nicely on ethernet addresses shoved into a structure or a larger buffer, until busted by Kasan on smth like plain (u8 *)[6]. qeth_l2_set_mac_address calls qeth_l2_remove_mac passing u8 old_addr[ETH_ALEN] as an argument. Adding/removing macs for an ethernet adapter is not that performance critical. Moreover is_multicast_ether_addr_64bits itself on s390 is not faster than is_multicast_ether_addr: is_multicast_ether_addr(%r2) -> %r2 llc %r2,0(%r2) risbg %r2,%r2,63,191,0 is_multicast_ether_addr_64bits(%r2) -> %r2 llgc %r2,0(%r2) risbg %r2,%r2,63,191,0 So, let's just use is_multicast_ether_addr instead of is_multicast_ether_addr_64bits. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Reviewed-by: Julian Wiedmann Signed-off-by: Vasily Gorbik Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Revert "s390/qeth: use Read device to query hypervisor for MAC"

2018-07-22T13:16:03+00:00

[ Upstream commit 4664610537d398d55be19432f9cd9c29c831e159 ] This reverts commit b7493e91c11a757cf0f8ab26989642ee4bb2c642. On its own, querying RDEV for a MAC address works fine. But when upgrading from a qeth that previously queried DDEV on a z/VM NIC (ie. any kernel with commit ec61bd2fd2a2), the RDEV query now returns a _different_ MAC address than the DDEV query. If the NIC is configured with MACPROTECT, z/VM apparently requires us to use the MAC that was initially returned (on DDEV) and registered. So after upgrading to a kernel that uses RDEV, the SETVMAC registration cmd for the new MAC address fails and we end up with a non-operabel interface. To avoid regressions on upgrade, switch back to using DDEV for the MAC address query. The downgrade path (first RDEV, later DDEV) is fine, in this case both queries return the same MAC address. Fixes: b7493e91c11a ("s390/qeth: use Read device to query hypervisor for MAC") Reported-by: Michal Kubecek Tested-by: Karsten Graul Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman