BMC/Intel-BMC/linux.git/drivers/vfio/pci, branch dev-5.2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

vfio-pci/nvlink2: Fix potential VMA leak

2019-05-01T19:31:41+00:00

If vfio_pci_register_dev_region() fails then we should rollback previous changes, ie. unmap the ATSD registers. Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Greg Kurz Reviewed-by: Alexey Kardashevskiy Signed-off-by: Alex Williamson

vfio: Use dev_printk() when possible

2019-04-22T17:45:42+00:00

Use dev_printk() when possible to make messages consistent with other device-related messages. Signed-off-by: Bjorn Helgaas Acked-by: Eric Auger Reviewed-by: Eric Auger Signed-off-by: Alex Williamson

vfio/pci: use correct format characters

2019-04-03T18:36:20+00:00

When compiling with -Wformat, clang emits the following warnings: drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~ drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] vendor, device, subvendor, subdevice, ^~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for unsigned ints. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Louis Taylor Reviewed-by: Nick Desaulniers Signed-off-by: Alex Williamson

vfio_pci: Enable memory accesses before calling pci_map_rom

2019-02-18T21:57:50+00:00

pci_map_rom/pci_get_rom_size() performs memory access in the ROM. In case the Memory Space accesses were disabled, readw() is likely to trigger a synchronous external abort on some platforms. In case memory accesses were disabled, re-enable them before the call and disable them back again just after. Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver") Signed-off-by: Eric Auger Suggested-by: Alex Williamson Signed-off-by: Alex Williamson

vfio/pci: Restore device state on PM transition

2019-02-18T21:55:53+00:00

PCI core handles save and restore of device state around reset, but when using pci_set_power_state() we can unintentionally trigger a soft reset of the device, where PCI core only restores the BAR state. If we're using vfio-pci's idle D3 support to try to put devices into low power when unused, this might trigger a reset when the device is woken for use. Also power state management by the user, or within a guest, can put the device into D3 power state with potentially limited ability to restore the device if it should undergo a reset. The PCI spec does not define the extent of a soft reset and many devices reporting soft reset on D3->D0 transition do not undergo a PCI config space reset. It's therefore assumed safe to unconditionally restore the remainder of the state if the device indicates soft reset support, even on a user initiated wakeup. Implement a wrapper in vfio-pci to tag devices reporting PM reset support, save their state on transitions into D3 and restore on transitions back to D0. Reported-by: Alexander Duyck Signed-off-by: Alex Williamson

vfio-pci/nvlink2: Fix ancient gcc warnings

2019-01-23T15:20:43+00:00

Using the {0} construct as a generic initializer is perfectly fine in C, however due to a bug in old gcc there is a warning: + /kisskb/src/drivers/vfio/pci/vfio_pci_nvlink2.c: warning: (near initialization for 'cap.header') [-Wmissing-braces]: => 181:9 Since for whatever reason we still want to compile the modern kernel with such an old gcc without warnings, this changes the capabilities initialization. The gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119 Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Alexey Kardashevskiy Reported-by: Geert Uytterhoeven Signed-off-by: Alex Williamson

vfio/pci: Cleanup license mess

2019-01-22T18:06:05+00:00

The recently added nvlink2 VFIO driver introduced a license conflict in two files. In both cases the SPDX license identifier is: SPDX-License-Identifier: GPL-2.0+ but the files contain also the following license boiler plate text: * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation The latter is GPL-2.9-only and not GPL-2.0=. Looking deeper. The nvlink source file is derived from vfio_pci_igd.c which is also licensed under GPL-2.0-only and it can be assumed that the file was copied and modified. As the original file is licensed GPL-2.0-only it's not possible to relicense derivative work to GPL-2.0-or-later. Fix the SPDX identifier and remove the boiler plate as it is redundant. Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Thomas Gleixner Cc: Alexey Kardashevskiy Cc: Alex Williamson Cc: Michael Ellerman Cc: kvm@vger.kernel.org Signed-off-by: Alex Williamson

vfio/pci: set TRACE_INCLUDE_PATH to fix the build error

2019-01-08T16:08:30+00:00

drivers/vfio/pci/vfio_pci_nvlink2.c cannot be compiled for in-tree building. CC drivers/vfio/pci/vfio_pci_nvlink2.o In file included from drivers/vfio/pci/trace.h:102, from drivers/vfio/pci/vfio_pci_nvlink2.c:29: ./include/trace/define_trace.h:89:42: fatal error: ./trace.h: No such file or directory #include TRACE_INCLUDE(TRACE_INCLUDE_FILE) ^ compilation terminated. make[1]: *** [scripts/Makefile.build;277: drivers/vfio/pci/vfio_pci_nvlink2.o] Error 1 To fix the build error, let's tell include/trace/define_trace.h the location of drivers/vfio/pci/trace.h Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Reported-by: Laura Abbott Signed-off-by: Masahiro Yamada Reviewed-by: Cornelia Huck Signed-off-by: Alex Williamson