BMC/Intel-BMC/linux.git/drivers/usb, branch v5.4.20

usb: gadget: f_ecm: Use atomic_t to track in-flight request

2020-02-11T12:35:10+00:00

commit d710562e01c48d59be3f60d58b7a85958b39aeda upstream. Currently ecm->notify_req is used to flag when a request is in-flight. ecm->notify_req is set to NULL and when a request completes it is subsequently reset. This is fundamentally buggy in that the unbind logic of the ECM driver will unconditionally free ecm->notify_req leading to a NULL pointer dereference. Fixes: da741b8c56d6 ("usb ethernet gadget: split CDC Ethernet function") Cc: stable Signed-off-by: Bryan O'Donoghue Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_ncm: Use atomic_t to track in-flight request

2020-02-11T12:35:10+00:00

commit 5b24c28cfe136597dc3913e1c00b119307a20c7e upstream. Currently ncm->notify_req is used to flag when a request is in-flight. ncm->notify_req is set to NULL and when a request completes it is subsequently reset. This is fundamentally buggy in that the unbind logic of the NCM driver will unconditionally free ncm->notify_req leading to a NULL pointer dereference. Fixes: 40d133d7f542 ("usb: gadget: f_ncm: convert to new function interface with backward compatibility") Cc: stable Signed-off-by: Bryan O'Donoghue Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: legacy: set max_speed to super-speed

2020-02-11T12:35:10+00:00

commit 463f67aec2837f981b0a0ce8617721ff59685c00 upstream. These interfaces do support super-speed so let's not limit maximum speed to high-speed. Cc: Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: set req->num_sgs as 0 for non-sg transfer

2020-02-11T12:35:10+00:00

commit d2450c6937018d40d4111fe830fa48d4ddceb8d0 upstream. The UDC core uses req->num_sgs to judge if scatter buffer list is used. Eg: usb_gadget_map_request_by_dev. For f_fs sync io mode, the request is re-used for each request, so if the 1st request->length > PAGE_SIZE, and the 2nd request->length is <= PAGE_SIZE, the f_fs uses the 1st req->num_sgs for the 2nd request, it causes the UDC core get the wrong req->num_sgs value (The 2nd request doesn't use sg). For f_fs async io mode, it is not harm to initialize req->num_sgs as 0 either, in case, the UDC driver doesn't zeroed request structure. Cc: Jun Li Cc: stable Fixes: 772a7a724f69 ("usb: gadget: f_fs: Allow scatter-gather buffers") Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpci: mask event interrupts when remove driver

2020-02-11T12:35:10+00:00

commit 3ba76256fc4e2a0d7fb26cc95459041ea0e88972 upstream. This is to prevent any possible events generated while unregister tpcm port. Fixes: 74e656d6b055 ("staging: typec: Type-C Port Controller Interface driver (tcpci)") Signed-off-by: Li Jun Reviewed-by: Heikki Krogerus Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/1579502333-4145-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Delay starting transfer

2020-02-11T12:35:09+00:00

commit da10bcdd6f70dc9977f2cf18f4783cf78520623a upstream. If the END_TRANSFER command hasn't completed yet, then don't send the START_TRANSFER command. The controller may not be able to start if that's the case. Some controller revisions depend on this. See commit 76a638f8ac0d ("usb: dwc3: gadget: wait for End Transfer to complete"). Let's only send START_TRANSFER command after the END_TRANSFER command had completed. Fixes: 3aec99154db3 ("usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING") Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Check END_TRANSFER completion

2020-02-11T12:35:09+00:00

commit c58d8bfc77a2c7f6ff6339b58c9fca7ae6f57e70 upstream. While the END_TRANSFER command is sent but not completed, any request dequeue during this time will cause the driver to issue the END_TRANSFER command. The driver needs to submit the command only once to stop the controller from processing further. The controller may take more time to process the same command multiple times unnecessarily. Let's add a flag DWC3_EP_END_TRANSFER_PENDING to check for this condition. Fixes: 3aec99154db3 ("usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING") Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb-storage: Disable UAS on JMicron SATA enclosure

2020-02-01T09:34:50+00:00

[ Upstream commit bc3bdb12bbb3492067c8719011576370e959a2e6 ] Steve Ellis reported incorrect block sizes and alignement offsets with a SATA enclosure. Adding a quirk to disable UAS fixes the problems. Reported-by: Steven Ellis Cc: Pacho Ramos Signed-off-by: Laura Abbott Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: musb: jz4740: Silence error if code is -EPROBE_DEFER

2020-02-01T09:34:44+00:00

[ Upstream commit ce03cbcb4b4fd2a3817f32366001f1ca45d213b8 ] Avoid printing any error message if the error code is -EPROBE_DEFER. Signed-off-by: Paul Cercueil Signed-off-by: Bin Liu Link: https://lore.kernel.org/r/20191216162432.1256-1-b-liu@ti.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW

2020-02-01T09:34:33+00:00

commit eb7a3bb8c955b3694e0e0998413ce1563c02f90c upstream. commit 8f6244055bd3 ("usb: typec: fusb302: Always provide fwnode for the port") didn't convert this value from mW to uW when migrating to a new specification format like it should have. Fixes: 8f6244055bd3 ("usb: typec: fusb302: Always provide fwnode for the port") Cc: stable@vger.kernel.org Signed-off-by: Thomas Hebb Reviewed-by: Heikki Krogerus Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/0da564559af75ec829c6c7e3aa4024f857c91bee.1579529334.git.tommyhebb@gmail.com Signed-off-by: Greg Kroah-Hartman