BMC/Intel-BMC/linux.git/drivers/usb, branch v4.18.18

USB: fix the usbfs flag sanitization for control transfers

2018-11-10T15:49:47+00:00

commit 665c365a77fbfeabe52694aedf3446d5f2f1ce42 upstream. Commit 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more") checks the transfer flags for URBs submitted from userspace via usbfs. However, the check for whether the USBDEVFS_URB_SHORT_NOT_OK flag should be allowed for a control transfer was added in the wrong place, before the code has properly determined the direction of the control transfer. (Control transfers are special because for them, the direction is set by the bRequestType byte of the Setup packet rather than direction bit of the endpoint address.) This patch moves code which sets up the allow_short flag for control transfers down after is_in has been set to the correct value. Signed-off-by: Alan Stern Reported-and-tested-by: syzbot+24a30223a4b609bb802e@syzkaller.appspotmail.com Fixes: 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more") CC: Oliver Neukum CC: Signed-off-by: Greg Kroah-Hartman

usb: xhci: pci: Enable Intel USB role mux on Apollo Lake platforms

2018-11-10T15:49:47+00:00

commit c02588a352defaf985fc1816eb6232663159e1b8 upstream. Intel Apollo Lake has the same internal USB role mux as Intel Cherry Trail. Cc: Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: roles: intel_xhci: Fix Unbalanced pm_runtime_enable

2018-11-10T15:49:46+00:00

commit 009b1948e153ae448f62f1887e2b58d0e05db51b upstream. Add missing pm_runtime_disable() to remove(), in order to avoid an Unbalanced pm_runtime_enable when the module is removed and re-probed. Error log: root@intel-corei7-64:~# modprobe -r intel_xhci_usb_role_switch root@intel-corei7-64:~# modprobe intel_xhci_usb_role_switch intel_xhci_usb_sw intel_xhci_usb_sw: Unbalanced pm_runtime_enable! Fixes: cb2968468605 (usb: roles: intel_xhci: Enable runtime PM) Cc: Reviewed-by: Heikki Krogerus Signed-off-by: Wan Ahmad Zainie Signed-off-by: Greg Kroah-Hartman

usb: gadget: storage: Fix Spectre v1 vulnerability

2018-11-10T15:49:46+00:00

commit 9ae24af3669111d418242caec8dd4ebd9ba26860 upstream. num can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/usb/gadget/function/f_mass_storage.c:3177 fsg_lun_make() warn: potential spectre issue 'fsg_opts->common->luns' [r] (local cap) Fix this by sanitizing num before using it to index fsg_opts->common->luns Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: usbip: Fix BUG: KASAN: slab-out-of-bounds in vhci_hub_control()

2018-11-10T15:49:46+00:00

commit 81f7567c51ad97668d1c3a48e8ecc482e64d4161 upstream. vhci_hub_control() accesses port_status array with out of bounds port value. Fix it to reference port_status[] only with a valid rhport value when invalid_rhport flag is true. The invalid_rhport flag is set early on after detecting in port value is within the bounds or not. The following is used reproduce the problem and verify the fix: C reproducer: https://syzkaller.appspot.com/x/repro.c?x=14ed8ab6400000 Reported-by: syzbot+bccc1fe10b70fadc78d0@syzkaller.appspotmail.com Cc: stable Signed-off-by: Shuah Khan (Samsung OSG) Signed-off-by: Greg Kroah-Hartman

cdc-acm: fix race between reset and control messaging

2018-11-10T15:49:46+00:00

commit 9397940ed812b942c520e0c25ed4b2c64d57e8b9 upstream. If a device splits up a control message and a reset() happens between the parts, the message is lost and already recieved parts must be dropped. Signed-off-by: Oliver Neukum Fixes: 1aba579f3cf51 ("cdc-acm: handle read pipe errors") Cc: stable Signed-off-by: Greg Kroah-Hartman

cdc-acm: correct counting of UART states in serial state notification

2018-11-10T15:49:46+00:00

commit f976d0e5747ca65ccd0fb2a4118b193d70aa1836 upstream. The usb standard ("Universal Serial Bus Class Definitions for Communication Devices") distiguishes between "consistent signals" (DSR, DCD), and "irregular signals" (break, ring, parity error, framing error, overrun). The bits of "irregular signals" are set, if this error/event occurred on the device side and are immeadeatly unset, if the serial state notification was sent. Like other drivers of real serial ports do, just the occurence of those events should be counted in serial_icounter_struct (but no 1->0 transitions). Signed-off-by: Tobias Herzog Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

cdc-acm: do not reset notification buffer index upon urb unlinking

2018-11-10T15:49:46+00:00

commit dae3ddba36f8c337fb59cef07d564da6fc9b7551 upstream. Resetting the write index of the notification buffer on urb unlink (e.g. closing a cdc-acm device from userspace) may lead to wrong interpretation of further received notifications, in case the index is not 0 when urb unlink happens (i.e. when parts of a notification already have been transferred). On the device side there is no "reset" of the notification transimission and thus we would get out of sync with the device. Signed-off-by: Tobias Herzog Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: cdc_acm: Do not leak URB buffers

2018-10-13T07:33:15+00:00

commit f2924d4b16ae138c2de6a0e73f526fb638330858 upstream. When the ACM TTY port is disconnected, the URBs it uses must be killed, and then the buffers must be freed. Unfortunately a previous refactor removed the code freeing the buffers because it looked extremely similar to the code killing the URBs. As a result, there were many new leaks for each plug/unplug cycle of a CDC-ACM device, that were detected by kmemleak. Restore the missing code, and the memory leak is removed. Fixes: ba8c931ded8d ("cdc-acm: refactor killing urbs") Signed-off-by: Romain Izard Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add two-endpoints device-id flag

2018-10-13T07:33:15+00:00

commit 35aecc02b5b621782111f64cbb032c7f6a90bb32 upstream. Allow matching on interfaces having two endpoints by adding a new device-id flag. This allows for the handling of devices whose interface numbers can change (e.g. Quectel EP06) to be contained in the device-id table. Tested-by: Kristian Evensen Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman