BMC/Intel-BMC/linux.git/drivers/usb, branch v4.10.9

USB: fix linked-list corruption in rh_call_control()

2017-04-08T07:35:08+00:00

commit 1633682053a7ee8058e10c76722b9b28e97fb73f upstream. Using KASAN, Dmitry found a bug in the rh_call_control() routine: If buffer allocation fails, the routine returns immediately without unlinking its URB from the control endpoint, eventually leading to linked-list corruption. This patch fixes the problem by jumping to the end of the routine (where the URB is unlinked) when an allocation failure occurs. Signed-off-by: Alan Stern Reported-and-tested-by: Dmitry Vyukov Signed-off-by: Greg Kroah-Hartman

xhci: Set URB actual length for stopped control transfers

2017-04-08T07:35:08+00:00

commit 0ab2881a406b9fd46224a3e8253bbc0141b4f844 upstream. A control transfer that stopped at the status stage incorrectly warned about a "unexpected TRB Type 4", and did not set the transferred actual_length for the URB. The URB actual_length for control transfers should contain the bytes transferred in the data stage. Bytes of a partially sent setup stage and missing bytes from status stage should be left out. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb: musb: fix possible spinlock deadlock

2017-03-31T08:33:43+00:00

commit bc1e2154542071e3cfe1734b143af9b8bdacf8bd upstream. The DSPS glue calls del_timer_sync() in its musb_platform_disable() implementation, which requires the caller to not hold a lock. But musb_remove() calls musb_platform_disable() will musb->lock held. This could causes spinlock deadlock. So change musb_remove() to call musb_platform_disable() without holds musb->lock. This doesn't impact the musb_platform_disable implementation in other glue drivers. root@am335x-evm:~# modprobe -r musb-dsps [ 126.134879] musb-hdrc musb-hdrc.1: remove, state 1 [ 126.140465] usb usb2: USB disconnect, device number 1 [ 126.146178] usb 2-1: USB disconnect, device number 2 [ 126.416985] musb-hdrc musb-hdrc.1: USB bus 2 deregistered [ 126.423943] [ 126.425525] ====================================================== [ 126.431997] [ INFO: possible circular locking dependency detected ] [ 126.438564] 4.11.0-rc1-00003-g1557f13bca04-dirty #77 Not tainted [ 126.444852] ------------------------------------------------------- [ 126.451414] modprobe/778 is trying to acquire lock: [ 126.456523] (((&glue->timer))){+.-...}, at: [] del_timer_sync+0x0/0xd0 [ 126.464403] [ 126.464403] but task is already holding lock: [ 126.470511] (&(&musb->lock)->rlock){-.-...}, at: [] musb_remove+0x50/0x1 30 [musb_hdrc] [ 126.479965] [ 126.479965] which lock already depends on the new lock. [ 126.479965] [ 126.488531] [ 126.488531] the existing dependency chain (in reverse order) is: [ 126.496368] [ 126.496368] -> #1 (&(&musb->lock)->rlock){-.-...}: [ 126.502968] otg_timer+0x80/0xec [musb_dsps] [ 126.507990] call_timer_fn+0xb4/0x390 [ 126.512372] expire_timers+0xf0/0x1fc [ 126.516754] run_timer_softirq+0x80/0x178 [ 126.521511] __do_softirq+0xc4/0x554 [ 126.525802] irq_exit+0xe8/0x158 [ 126.529735] __handle_domain_irq+0x58/0xb8 [ 126.534583] __irq_usr+0x54/0x80 [ 126.538507] [ 126.538507] -> #0 (((&glue->timer))){+.-...}: [ 126.544636] del_timer_sync+0x40/0xd0 [ 126.549066] musb_remove+0x6c/0x130 [musb_hdrc] [ 126.554370] platform_drv_remove+0x24/0x3c [ 126.559206] device_release_driver_internal+0x14c/0x1e0 [ 126.565225] bus_remove_device+0xd8/0x108 [ 126.569970] device_del+0x1e4/0x308 [ 126.574170] platform_device_del+0x24/0x8c [ 126.579006] platform_device_unregister+0xc/0x20 [ 126.584394] dsps_remove+0x14/0x30 [musb_dsps] [ 126.589595] platform_drv_remove+0x24/0x3c [ 126.594432] device_release_driver_internal+0x14c/0x1e0 [ 126.600450] driver_detach+0x38/0x6c [ 126.604740] bus_remove_driver+0x4c/0xa0 [ 126.609407] SyS_delete_module+0x11c/0x1e4 [ 126.614252] __sys_trace_return+0x0/0x10 Fixes: ea2f35c01d5ea ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Acked-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

USB: usbtmc: fix probe error path

2017-03-30T07:44:05+00:00

commit 2e47c53503eb9faff42b3cfa144a833344dd1f89 upstream. Make sure to initialise the return value to avoid having allocation failures going unnoticed when allocating interrupt-endpoint resources. This prevents use-after-free or worse when the device is later unbound. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Cc: Dave Penkler Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: usbtmc: add missing endpoint sanity check

2017-03-30T07:44:05+00:00

commit 687e0687f71ec00e0132a21fef802dee88c2f1ad upstream. USBTMC devices are required to have a bulk-in and a bulk-out endpoint, but the driver failed to verify this, something which could lead to the endpoint addresses being taken from uninitialised memory. Make sure to zero all private data as part of allocation, and add the missing endpoint sanity check. Note that this also addresses a more recently introduced issue, where the interrupt-in-presence flag would also be uninitialised whenever the optional interrupt-in endpoint is not present. This in turn could lead to an interrupt urb being allocated, initialised and submitted based on uninitialised values. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Fixes: 5b775f672cc9 ("USB: add USB test and measurement class driver") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: hub: Fix crash after failure to read BOS descriptor

2017-03-30T07:44:05+00:00

commit 7b2db29fbb4e766fcd02207eb2e2087170bd6ebc upstream. If usb_get_bos_descriptor() returns an error, usb->bos will be NULL. Nevertheless, it is dereferenced unconditionally in hub_set_initial_usb2_lpm_policy() if usb2_hw_lpm_capable is set. This results in a crash. usb 5-1: unable to get BOS descriptor ... Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = ffffffc00165f000 [00000008] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac [ ... ] CPU: 5 PID: 3353 Comm: kworker/5:3 Tainted: G B 4.4.52 #480 Hardware name: Google Kevin (DT) Workqueue: events driver_set_config_work task: ffffffc0c3690000 ti: ffffffc0ae9a8000 task.ti: ffffffc0ae9a8000 PC is at hub_port_init+0xc3c/0xd10 LR is at hub_port_init+0xc3c/0xd10 ... Call trace: [] hub_port_init+0xc3c/0xd10 [] usb_reset_and_verify_device+0x15c/0x82c [] usb_reset_device+0xe4/0x298 [] rtl8152_probe+0x84/0x9b0 [r8152] [] usb_probe_interface+0x244/0x2f8 [] driver_probe_device+0x180/0x3b4 [] __device_attach_driver+0xb4/0xe0 [] bus_for_each_drv+0xb4/0xe4 [] __device_attach+0xd0/0x158 [] device_initial_probe+0x24/0x30 [] bus_probe_device+0x50/0xe4 [] device_add+0x414/0x738 [] usb_set_configuration+0x89c/0x914 [] driver_set_config_work+0xc0/0xf0 [] process_one_work+0x390/0x6b8 [] worker_thread+0x480/0x610 [] kthread+0x164/0x178 [] ret_from_fork+0x10/0x40 Since we don't know anything about LPM capabilities without BOS descriptor, don't attempt to enable LPM if it is not available. Fixes: 890dae886721 ("xhci: Enable LPM support only for hardwired ...") Cc: Mathias Nyman Signed-off-by: Guenter Roeck Acked-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer

2017-03-30T07:44:05+00:00

commit 0090114d336a9604aa2d90bc83f20f7cd121b76c upstream. The CPPI 4.1 driver polls register to workaround the premature TX interrupt issue, but it causes audio playback underrun when triggered in Isoch transfers. Isoch doesn't do back-to-back transfers, the TX should be done by the time the next transfer is scheduled. So skip this polling workaround for Isoch transfer. Fixes: a655f481d83d6 ("usb: musb: musb_cppi41: handle pre-mature TX complete interrupt") Reported-by: Alexandre Bailon Acked-by: Sebastian Andrzej Siewior Tested-by: Alexandre Bailon Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

USB: wusbcore: fix NULL-deref at probe

2017-03-30T07:44:04+00:00

commit 03ace948a4eb89d1cf51c06afdfc41ebca5fdb27 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. This specifically fixes the NULL-pointer dereference when probing HWA HC devices. Fixes: df3654236e31 ("wusb: add the Wire Adapter (WA) core") Cc: Inaky Perez-Gonzalez Cc: David Vrabel Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: idmouse: fix NULL-deref at probe

2017-03-30T07:44:04+00:00

commit b0addd3fa6bcd119be9428996d5d4522479ab240 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: lvtest: fix NULL-deref at probe

2017-03-30T07:44:04+00:00

commit 1dc56c52d2484be09c7398a5207d6b11a4256be9 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should the probed device lack endpoints. Note that this driver does not bind to any devices by default. Fixes: ce21bfe603b3 ("USB: Add LVS Test device driver") Cc: Pratyush Anand Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman