BMC/Intel-BMC/linux.git/drivers/usb, branch dev-4.17

Merge tag 'v4.17.18' into dev-4.17

2018-08-22T08:16:32+00:00

This is the 4.17.18 stable release Signed-off-by: Joel Stanley

USB: option: add support for DW5821e

2018-08-22T05:44:54+00:00

commit 7bab01ecc6c43da882333c6db39741cb43677004 upstream. The device exposes AT, NMEA and DIAG ports in both USB configurations. The patch explicitly ignores interfaces 0 and 1, as they're bound to other drivers already; and also interface 6, which is a GNSS interface for which we don't have a driver yet. T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Aleksander Morgado Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: serial: pl2303: add a new device id for ATEN

2018-08-22T05:44:54+00:00

commit 29c692c96b3a39cd1911fb79cd2505af8d070f07 upstream. Signed-off-by: Movie Song Cc: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: serial: sierra: fix potential deadlock at close

2018-08-22T05:44:54+00:00

commit e60870012e5a35b1506d7b376fddfb30e9da0b27 upstream. The portdata spinlock can be taken in interrupt context (via sierra_outdat_callback()). Disable interrupts when taking the portdata spinlock when discarding deferred URBs during close to prevent a possible deadlock. Fixes: 014333f77c0b ("USB: sierra: fix urb and memory leak on disconnect") Cc: stable Signed-off-by: John Ogness Signed-off-by: Sebastian Andrzej Siewior [ johan: amend commit message and add fixes and stable tags ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

Merge tag 'v4.17.14' into dev-4.17

2018-08-15T00:05:27+00:00

This is the 4.17.14 stable release Signed-off-by: Joel Stanley

usb: hub: Don't wait for connect state at resume for powered-off ports

2018-08-03T05:48:00+00:00

[ Upstream commit 5d111f5190848d6fb1c414dc57797efea3526a2f ] wait_for_connected() wait till a port change status to USB_PORT_STAT_CONNECTION, but this is not possible if the port is unpowered. The loop will only exit at timeout. Such case take place if an over-current incident happen while system is in S3. Then during resume wait_for_connected() will wait 2s, which may be noticeable by the user. Signed-off-by: Dominik Bozek Signed-off-by: Kuppuswamy Sathyanarayanan Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Merge tag 'v4.17.11' into dev-4.17

2018-07-30T01:23:19+00:00

This is the 4.17.11 stable release Signed-off-by: Joel Stanley

usb: gadget: f_fs: Only return delayed status when len is 0

2018-07-28T05:57:17+00:00

commit 4d644abf25698362bd33d17c9ddc8f7122c30f17 upstream. Commit 1b9ba000 ("Allow function drivers to pause control transfers") states that USB_GADGET_DELAYED_STATUS is only supported if data phase is 0 bytes. It seems that when the length is not 0 bytes, there is no need to explicitly delay the data stage since the transfer is not completed until the user responds. However, when the length is 0, there is no data stage and the transfer is finished once setup() returns, hence there is a need to explicitly delay completion. This manifests as the following bugs: Prior to 946ef68ad4e4 ('Let setup() return USB_GADGET_DELAYED_STATUS'), when setup is 0 bytes, ffs would require user to queue a 0 byte request in order to clear setup state. However, that 0 byte request was actually not needed and would hang and cause errors in other setup requests. After the above commit, 0 byte setups work since the gadget now accepts empty queues to ep0 to clear the delay, but all other setups hang. Fixes: 946ef68ad4e4 ("Let setup() return USB_GADGET_DELAYED_STATUS") Signed-off-by: Jerry Zhang Cc: stable Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: Fix OS descriptors support

2018-07-28T05:57:17+00:00

commit 50b9773c13bffbef32060e67c4483ea7b2eca7b5 upstream. The current code is broken as it re-defines "req" inside the if block, then goto out of it. Thus the request that ends up being sent is not the one that was populated by the code in question. This fixes RNDIS driver autodetect by Windows 10 for me. The bug was introduced by Chris rework to remove the local queuing inside the if { } block of the redefined request. Fixes: 636ba13aec8a ("usb: gadget: composite: remove duplicated code in OS desc handling") Cc: # v4.17 Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: xhci: Fix memory leak in xhci_endpoint_reset()

2018-07-28T05:57:17+00:00

commit d89b7664f76047e7beca8f07e86f2ccfad085a28 upstream. If td_list is not empty the cfg_cmd will not be freed, call xhci_free_command to free it. Signed-off-by: Zheng Xiaowei Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman