BMC/Intel-BMC/linux.git/drivers/usb/phy/phy-tegra-usb.c, branch dev-5.3

usb: tegra: Move utmi-pads reset from ehci-tegra to tegra-phy

2018-04-23T07:50:57+00:00

UTMI pads are shared by USB controllers and reset of UTMI pads is shared with the reset of USB1 controller. Currently reset of UTMI pads is done by the EHCI driver and ChipIdea UDC works because EHCI driver always happen to be probed first. Move reset controls from ehci-tegra to tegra-phy in order to resolve the problem. Signed-off-by: Dmitry Osipenko Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: Cleanup error messages

2018-04-23T07:50:57+00:00

Tegra's PHY driver has a mix of pr_err() and dev_err(), let's switch to dev_err() and use common errors message formatting across the driver for consistency. Signed-off-by: Dmitry Osipenko Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: Increase PHY clock stabilization timeout

2018-03-13T08:47:52+00:00

This fixes "utmi_phy_clk_enable: timeout waiting for phy to stabilize" error message. Signed-off-by: Dmitry Osipenko Signed-off-by: Felipe Balbi

USB: phy: Remove redundant license text

2017-11-07T14:45:01+00:00

Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Thierry Reding Cc: Jonathan Hunter Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02+00:00

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: phy: tegra: Fix phy suspend for UDC

2017-10-11T10:13:07+00:00

Commit dfebb5f43a78 ("usb: chipidea: Add support for Tegra20/30/114/124") added UDC support for Tegra but with UDC support enabled, is was found that Tegra30, Tegra114 and Tegra124 would hang on entry to suspend. The hang occurred during the suspend of the USB PHY when the Tegra PHY driver attempted to disable the PHY clock. The problem is that before the Tegra PHY driver is suspended, the chipidea driver already disabled the PHY clock and when the Tegra PHY driver suspended, it could not read DEVLC register and caused the device to hang. The Tegra USB PHY driver is used by both the Tegra EHCI driver and now the chipidea UDC driver and so simply removing the disabling of the PHY clock from the USB PHY driver would not work for the Tegra EHCI driver. Fortunately, the status of the USB PHY clock can be read from the USB_SUSP_CTRL register and therefore, to workaround this issue, simply poll the register prior to disabling the clock in USB PHY driver to see if clock gating has already been initiated. Please note that it can take a few uS for the clock to disable and so simply reading this status register once on entry is not sufficient. Similarly when turning on the PHY clock, it is possible that the clock is already enabled or in the process of being enabled, and so check for this when enabling the PHY. Please note that no issues are seen with Tegra20 because it has a slightly different PHY to Tegra30/114/124. Fixes: dfebb5f43a78 ("usb: chipidea: Add support for Tegra20/30/114/124") Reviewed-by: Dmitry Osipenko Tested-by: Dmitry Osipenko Acked-by: Thierry Reding Signed-off-by: Jon Hunter Signed-off-by: Felipe Balbi

usb: common: of_usb_get_dr_mode to usb_get_dr_mode

2015-09-27T15:54:31+00:00

By using the unified device property interface, the function can be made available for all platforms and not just the ones using DT. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2014-12-15T00:10:09+00:00

Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev__once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...

usb: phy: phy-tegra-usb: delete unnecessary 'out of memory' messages

2014-11-03T16:01:05+00:00

The memory subsystem has already had similar message for it. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi

usb: phy: drop owner assignment from platform_drivers

2014-10-20T14:21:50+00:00

A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang