BMC/Intel-BMC/linux.git/drivers/usb/musb, branch dev-4.6

usb: musb: host: correct cppi dma channel for isoch transfer

2016-07-11T16:30:02+00:00

commit 04471eb8c3158c0ad9df4b24da845a63b2e8f23a upstream. Incorrect cppi dma channel is referenced in musb_rx_dma_iso_cppi41(), which causes kernel NULL pointer reference oops later when calling cppi41_dma_channel_program(). Fixes: 069a3fd (usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part1) Reported-by: Matwey V. Kornilov Acked-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

usb: musb: Ensure rx reinit occurs for shared_fifo endpoints

2016-07-11T16:30:02+00:00

commit f3eec0cf784e0d6c47822ca6b66df3d5812af7e6 upstream. shared_fifo endpoints would only get a previous tx state cleared out, the rx state was only cleared for non shared_fifo endpoints Change this so that the rx state is cleared for all endpoints. This addresses an issue that resulted in rx packets being dropped silently. Signed-off-by: Andrew Goodbody Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

usb: musb: Stop bulk endpoint while queue is rotated

2016-07-11T16:30:01+00:00

commit 7b2c17f829545df27a910e8d82e133c21c9a8c9c upstream. Ensure that the endpoint is stopped by clearing REQPKT before clearing DATAERR_NAKTIMEOUT before rotating the queue on the dedicated bulk endpoint. This addresses an issue where a race could result in the endpoint receiving data before it was reprogrammed resulting in a warning about such data from musb_rx_reinit before it was thrown away. The data thrown away was a valid packet that had been correctly ACKed which meant the host and device got out of sync. Signed-off-by: Andrew Goodbody Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

usb: musb: only restore devctl when session was set in backup

2016-07-11T16:30:01+00:00

commit 84ac5d1140f716a616522f952734e850448d2556 upstream. If the session bit was not set in the backup of devctl register, restoring devctl would clear the session bit. Therefor, only restore devctl register when the session bit was set in the backup. This solves the device enumeration failure in otg mode exposed by commit 56f487c (PM / Runtime: Update last_busy in rpm_resume). Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

usb: musb: jz4740: fix error check of usb_get_phy()

2016-04-26T21:50:02+00:00

The usb_get_phy() function returns either a valid pointer to phy or ERR_PTR() error, check for NULL always fails and may lead to oops on error path, fix this issue. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

Revert "usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half"

2016-04-26T21:50:02+00:00

This reverts commit 2035772010db634ec8566b658fb1cd87ec47ac77. Commit 20357720 claims throughput improvement for MSC/UVC, but I don't see much improvement. Following are the MSC measurement using dd on AM335x GP EVM. with BCD_BH: read: 14.9MB/s, write: 20.9MB/s without BCD_BH: read: 15.2MB/s, write: 21.2MB/s However with this commit the following regressions have been observed. 1. ASIX usb-ethernet dongle is completely broken on UDP RX. 2. Unpluging a 3G modem, which uses option driver, behind a hub causes console log flooding with the following message. option_instat_callback: error -71 Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

usb: musb: gadget: nuke endpoint before setting its descriptor to NULL

2016-04-26T21:50:02+00:00

Some functions, such as f_sourcesink, rely on an endpoint's desc field during their requests' complete() callback, so clear it only _after_ nuking all requests to avoid NULL pointer dereference. Signed-off-by: Tal Shorer Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config

2016-03-04T13:14:46+00:00

The musb_hdrc_platform_data::config was defined as a non-const pointer. However some drivers (e.g. the ux500) set up this pointer to point to a static structure, which is potentially dangerous. Since the musb core uses the pointer in a read-only manner the const qualifier was added to protect the content of the config. Signed-off-by: Petr Kulhavy Acked-by: Sergei Shtylyov Signed-off-by: Bin Liu Signed-off-by: Felipe Balbi

usb: musb: sunxi: support module autoloading

2016-03-04T13:14:38+00:00

MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on sunxi systems using the OTG controller. This commit adds the missing line so it loads automatically when building it as a module and running on a system with an USB OTG port. Signed-off-by: Emilio López Signed-off-by: Felipe Balbi

usb: musb/ux500: remove duplicate check for dma_is_compatible

2016-03-04T13:14:30+00:00

When dma_addr_t is 64-bit, we get a warning about an invalid cast in the call to ux500_dma_is_compatible() from ux500_dma_channel_program(): drivers/usb/musb/ux500_dma.c: In function 'ux500_dma_channel_program': drivers/usb/musb/ux500_dma.c:210:51: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] if (!ux500_dma_is_compatible(channel, packet_sz, (void *)dma_addr, len)) The problem is that ux500_dma_is_compatible() is called from the main musb driver on the virtual address, but here we pass in a DMA address, so the types are fundamentally different but it works because the function only checks the alignment of the buffer and that is the same. We could work around this by adding another cast, but I have checked that the buffer we get passed here is already checked before it gets mapped, so the second check seems completely unnecessary and removing it must be the cleanest solution. Signed-off-by: Arnd Bergmann Signed-off-by: Felipe Balbi