BMC/Intel-BMC/linux.git/drivers/usb/dwc3, branch dev-5.3

usb: dwc3: gadget: fix race when disabling ep with cancelled xfers

2019-11-12T18:28:16+00:00

[ Upstream commit d8eca64eec7103ab1fbabc0a187dbf6acfb2af93 ] When disabling an endpoint which has cancelled requests, we should make sure to giveback requests that are currently pending in the cancelled list, otherwise we may fall into a situation where command completion interrupt fires after endpoint has been disabled, therefore causing a splat. Fixes: fec9095bdef4 "usb: dwc3: gadget: remove wait_end_transfer" Reported-by: Roger Quadros Signed-off-by: Felipe Balbi Link: https://lore.kernel.org/r/20191031090713.1452818-1-felipe.balbi@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: dwc3: remove the call trace of USBx_GFLADJ

2019-11-12T18:27:59+00:00

[ Upstream commit a7d9874c6f3fbc8d25cd9ceba35b6822612c4ebf ] layerscape board sometimes reported some usb call trace, that is due to kernel sent LPM tokerns automatically when it has no pending transfers and think that the link is idle enough to enter L1, which procedure will ask usb register has a recovery,then kernel will compare USBx_GFLADJ and set GFLADJ_30MHZ, GFLADJ_30MHZ_REG until GFLADJ_30MHZ is equal 0x20, if the conditions were met then issue occur, but whatever the conditions whether were met that usb is all need keep GFLADJ_30MHZ of value is 0x20 (xhci spec ask use GFLADJ_30MHZ to adjust any offset from clock source that generates the clock that drives the SOF counter, 0x20 is default value of it)That is normal logic, so need remove the call trace. Signed-off-by: Yinbo Zhu Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

usb: dwc3: pci: prevent memory leak in dwc3_pci_probe

2019-11-12T18:27:57+00:00

[ Upstream commit 9bbfceea12a8f145097a27d7c7267af25893c060 ] In dwc3_pci_probe a call to platform_device_alloc allocates a device which is correctly put in case of error except one case: when the call to platform_device_add_properties fails it directly returns instead of going to error handling. This commit replaces return with the goto. Fixes: 1a7b12f69a94 ("usb: dwc3: pci: Supply device properties via driver data") Signed-off-by: Navid Emamdoost Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

usb: dwc3: select CONFIG_REGMAP_MMIO

2019-11-12T18:27:55+00:00

[ Upstream commit a51bab592fbbef10f0e42a8aed86adfbf6a68fa7 ] After many randconfig builds, one configuration caused a link error with dwc3-meson-g12a lacking the regmap-mmio code: drivers/usb/dwc3/dwc3-meson-g12a.o: In function `dwc3_meson_g12a_probe': dwc3-meson-g12a.c:(.text+0x9f): undefined reference to `__devm_regmap_init_mmio_clk' Add the select statement that we have for all other users of that dependency. Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue") Acked-by: Neil Armstrong Signed-off-by: Arnd Bergmann Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

Revert "usb:gadget Separated decoding functions from dwc3 driver."

2019-07-04T11:02:09+00:00

This reverts commit 3db1b636c07e15ff7410db782832dc2e7ffd2bce. It's broken. Reported-by: Stephen Rothwell Cc: Felipe Balbi Cc: Pawel Laszczak Signed-off-by: Greg Kroah-Hartman

usb:gadget Separated decoding functions from dwc3 driver.

2019-07-03T07:45:58+00:00

Patch moves some decoding functions from driver/usb/dwc3/debug.h driver to driver/usb/gadget/debug.c file. These moved functions include: dwc3_decode_get_status dwc3_decode_set_clear_feature dwc3_decode_set_address dwc3_decode_get_set_descriptor dwc3_decode_get_configuration dwc3_decode_set_configuration dwc3_decode_get_intf dwc3_decode_set_intf dwc3_decode_synch_frame dwc3_decode_set_sel dwc3_decode_set_isoch_delay dwc3_decode_ctrl These functions are used also in inroduced cdns3 driver. All functions prefixes were changed from dwc3 to usb. Also, function's parameters has been extended according to the name of fields in standard SETUP packet. Additionally, patch adds usb_decode_ctrl function to include/linux/usb/gadget.h file. Signed-off-by: Pawel Laszczak Signed-off-by: Felipe Balbi

usb: dwc3: pci: add support for TigerLake Devices

2019-07-03T07:45:11+00:00

This patch adds the necessary PCI ID for TGP-LP devices. Signed-off-by: Felipe Balbi

usb: dwc3: remove unused @lock member of dwc3_ep struct

2019-06-20T08:50:19+00:00

The member @lock of dwc3_ep struct is only initialized, and not used elsewhere, so remove it. Signed-off-by: Chunfeng Yun Signed-off-by: Felipe Balbi

usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices

2019-06-20T07:35:41+00:00

This patch simply adds a new PCI Device ID Signed-off-by: Felipe Balbi

usb: dwc3: gadget: Add support for disabling U1 and U2 entries

2019-06-18T08:58:30+00:00

Gadget applications may have a requirement to disable the U1 and U2 entry based on the usecase. Below are few usecases where the disabling U1/U2 entries may be possible. Usecase 1: When combining dwc3 with an redriver for a USB Type-C device solution, it sometimes have problems with leaving U1/U2 for certain hosts, resulting in link training errors and reconnects. For this U1/U2 state entries may be avoided. Usecase 2: When performing performance benchmarking on mass storage gadget the U1 and U2 entries can be disabled. Usecase 3: When periodic transfers like ISOC transfers are used with bInterval of 1 which doesn't require the link to enter into U1 or U2 state entry (since ping is issued from host for every uframe interval). In this case the U1 and U2 entry can be disabled. Disablement of U1/U2 can be done by setting U1DevExitLat and U2DevExitLat values to 0 in the BOS descriptor. Host on seeing 0 value for U1DevExitLat and U2DevExitLat, it doesn't send SET_SEL requests to the gadget. There may be some hosts which may send SET_SEL requests even after seeing 0 in the UxDevExitLat of BOS descriptor. To aviod U1/U2 entries for these type of hosts, dwc3 controller can be programmed to reject those U1/U2 requests by not enabling ACCEPTUxENA bits in DCTL register. This patch updates the same. Signed-off-by: Anurag Kumar Vulisha Signed-off-by: Claus H. Stovgaard Signed-off-by: Felipe Balbi