Intel OpenBMC Linux kernel source tree (mirror) https://git.radix-linux.su/BMC/Intel-BMC/linux.git/atom?h=dev-4.4 2016-09-07T06:32:39+00:00 2016-09-07T06:32:39+00:00 Alan Stern stern@rowland.harvard.edu 2016-08-05T15:51:30+00:00 urn:sha1:4a6eff809af0a1662917338c47bf9291f77d62cc commit 07d316a22e119fa301fd7dba7f1e1adfd4f72c05 upstream. The locking in hub_activate() is not adequate to provide full mutual exclusion with hub_quiesce(). The subroutine locks the hub's usb_interface, but the callers of hub_quiesce() (such as hub_pre_reset() and hub_event()) hold the lock to the hub's usb_device. This patch changes hub_activate() to make it acquire the same lock as those other routines. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-09-07T06:32:39+00:00 Alan Stern stern@rowland.harvard.edu 2016-08-05T15:49:45+00:00 urn:sha1:52217416177820e2c2a1350be31e071db4ccd305 commit ca5cbc8b02f9b21cc8cd1ab36668763ec34f9ee8 upstream. The early-exit pathway in hub_activate, added by commit e50293ef9775 ("USB: fix invalid memory access in hub_activate()") needs improvement. It duplicates code that is already present at the end of the subroutine, and it neglects to undo the effect of a usb_autopm_get_interface_no_resume() call. This patch fixes both problems by making the early-exit pathway jump directly to the end of the subroutine. It simplifies the code at the end by merging two conditionals that actually test the same condition although they appear different: If type < HUB_INIT3 then type must be either HUB_INIT2 or HUB_INIT, and it can't be HUB_INIT because in that case the subroutine would have exited earlier. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-09-07T06:32:39+00:00 Viresh Kumar viresh.kumar@linaro.org 2016-08-04T20:32:22+00:00 urn:sha1:7edabddaea5c46241aa76672fee0e45e9bf11b77 commit 6bb47e8ab98accb1319bd43c64966340ba3bba9a upstream. Memory leak and unbalanced reference count: If the hub gets disconnected while the core is still activating it, this can result in leaking memory of few USB structures. This will happen if we have done a kref_get() from hub_activate() and scheduled a delayed work item for HUB_INIT2/3. Now if hub_disconnect() gets called before the delayed work expires, then we will cancel the work from hub_quiesce(), but wouldn't do a kref_put(). And so the unbalance. kmemleak reports this as (with the commit e50293ef9775 backported to 3.10 kernel with other changes, though the same is true for mainline as well): unreferenced object 0xffffffc08af5b800 (size 1024): comm "khubd", pid 73, jiffies 4295051211 (age 6482.350s) hex dump (first 32 bytes): 30 68 f3 8c c0 ff ff ff 00 a0 b2 2e c0 ff ff ff 0h.............. 01 00 00 00 00 00 00 00 00 94 7d 40 c0 ff ff ff ..........}@.... backtrace: [<ffffffc0003079ec>] create_object+0x148/0x2a0 [<ffffffc000cc150c>] kmemleak_alloc+0x80/0xbc [<ffffffc000303a7c>] kmem_cache_alloc_trace+0x120/0x1ac [<ffffffc0006fa610>] hub_probe+0x120/0xb84 [<ffffffc000702b20>] usb_probe_interface+0x1ec/0x298 [<ffffffc0005d50cc>] driver_probe_device+0x160/0x374 [<ffffffc0005d5308>] __device_attach+0x28/0x4c [<ffffffc0005d3164>] bus_for_each_drv+0x78/0xac [<ffffffc0005d4ee0>] device_attach+0x6c/0x9c [<ffffffc0005d42b8>] bus_probe_device+0x28/0xa0 [<ffffffc0005d23a4>] device_add+0x324/0x604 [<ffffffc000700fcc>] usb_set_configuration+0x660/0x6cc [<ffffffc00070a350>] generic_probe+0x44/0x84 [<ffffffc000702914>] usb_probe_device+0x54/0x74 [<ffffffc0005d50cc>] driver_probe_device+0x160/0x374 [<ffffffc0005d5308>] __device_attach+0x28/0x4c Deadlocks: If the hub gets disconnected early enough (i.e. before INIT2/INIT3 are finished and the init_work is still queued), the core may call hub_quiesce() after acquiring interface device locks and it will wait for the work to be cancelled synchronously. But if the work handler is already running in parallel, it may try to acquire the same interface device lock and this may result in deadlock. Fix both the issues by removing the call to cancel_delayed_work_sync(). Fixes: e50293ef9775 ("USB: fix invalid memory access in hub_activate()") Reported-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-09-07T06:32:39+00:00 Mathias Nyman mathias.nyman@linux.intel.com 2015-12-10T07:59:25+00:00 urn:sha1:dbb9fe1fc7a73bf99976e0cb12fdbd2a0106731c commit 8a1b2725a60d3267135c15e80984b4406054f650 upstream. Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-04-20T06:42:17+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2016-02-20T22:19:34+00:00 urn:sha1:4b59a38da5983852008270e81140f611df6f0bfd commit e5bdfd50d6f76077bf8441d130c606229e100d40 upstream. This reverts commit d8f00cd685f5c8e0def8593e520a7fef12c22407. Tony writes: This upstream commit is causing an oops: d8f00cd685f5 ("usb: hub: do not clear BOS field during reset device") This patch has already been included in several -stable kernels. Here are the affected kernels: 4.5.0-rc4 (current git) 4.4.2 4.3.6 (currently in review) 4.1.18 3.18.27 3.14.61 How to reproduce the problem: Boot kernel with slub debugging enabled (otherwise memory corruption will cause random oopses later instead of immediately) Plug in USB 3.0 disk to xhci USB 3.0 port dd if=/dev/sdc of=/dev/null bs=65536 (where /dev/sdc is the USB 3.0 disk) Unplug USB cable while dd is still going Oops is immediate: Reported-by: Tony Battersby <tonyb@cybernetics.com> Cc: Du, Changbin <changbin.du@intel.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-04-12T16:08:40+00:00 Oliver Neukum oneukum@suse.com 2016-02-17T10:52:43+00:00 urn:sha1:aa563cf3bc7ef570f449501ff7ab12f3b7080ff0 commit 0d5ce778c43bf888328231bcdce05d5c860655aa upstream. A typo of j for i led to a logic bug. To rule out future confusion, the variable names are made meaningful. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-04-12T16:08:40+00:00 Oliver Neukum oneukum@suse.com 2016-02-10T10:33:18+00:00 urn:sha1:951822beba268f76af9463c69095284df20311f6 commit 264904ccc33c604d4b3141bbd33808152dfac45b upstream. Some devices I got show an inability to operate right after power on if they are already connected. They are beyond recovery if the descriptors are requested multiple times. So in case of a timeout we rather bail early and reset again. But it must be done only on the first loop lest we get into a reset/time out spiral that can be overcome with a retry. This patch is a rework of a patch that fell through the cracks. http://www.spinics.net/lists/linux-usb/msg103263.html Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-02-17T20:31:01+00:00 Du, Changbin changbin.du@intel.com 2016-01-18T13:02:42+00:00 urn:sha1:c9b1074e18b607f54ac195959d5a4daacaa81325 commit d8f00cd685f5c8e0def8593e520a7fef12c22407 upstream. In function usb_reset_and_verify_device, the old BOS descriptor may still be used before allocating a new one. (usb_unlocked_disable_lpm function uses it under the situation that it fails to disable lpm.) So we cannot set the udev->bos to NULL before that, just keep what it was. It will be overwrite when allocating a new one. Crash log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8171f98d>] usb_enable_link_state+0x2d/0x2f0 Call Trace: [<ffffffff8171ed5b>] ? usb_set_lpm_timeout+0x12b/0x140 [<ffffffff8171fcd1>] usb_enable_lpm+0x81/0xa0 [<ffffffff8171fdd8>] usb_disable_lpm+0xa8/0xc0 [<ffffffff8171fe1c>] usb_unlocked_disable_lpm+0x2c/0x50 [<ffffffff81723933>] usb_reset_and_verify_device+0xc3/0x710 [<ffffffff8172c4ed>] ? usb_sg_wait+0x13d/0x190 [<ffffffff81724743>] usb_reset_device+0x133/0x280 [<ffffffff8179ccd1>] usb_stor_port_reset+0x61/0x70 [<ffffffff8179cd68>] usb_stor_invoke_transport+0x88/0x520 Signed-off-by: Du, Changbin <changbin.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-01-31T19:28:58+00:00 Lu Baolu baolu.lu@linux.intel.com 2015-11-14T08:26:32+00:00 urn:sha1:877764274280a69a888e1fdb18d411b36dc25c31 commit bf5ce5bf3cc7136fd7fe5e8999a580bc93a9c8f6 upstream. Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM") introduced usb3_hardware_lpm sysfs node. This doesn't show the correct status of USB3 U1 and U2 LPM status. This patch fixes this by replacing usb3_hardware_lpm with two nodes, usb3_hardware_lpm_u1 (for U1) and usb3_hardware_lpm_u2 (for U2), and recording the U1/U2 LPM status in right places. This patch should be back-ported to kernels as old as 4.3, that contains Commit 655fe4effe0f ("usbcore: add sysfs support to xHCI usb3 hardware LPM"). Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2015-12-18T17:30:34+00:00 Alan Stern stern@rowland.harvard.edu 2015-12-16T18:32:38+00:00 urn:sha1:e50293ef9775c5f1cf3fcc093037dd6a8c5684ea Commit 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Alexandru Cornea <alexandru.cornea@intel.com> Tested-by: Alexandru Cornea <alexandru.cornea@intel.com> Fixes: 8520f38099cc ("USB: change hub initialization sleeps to delayed_work") CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>