BMC/Intel-BMC/linux.git/drivers/usb/core/config.c, branch dev-4.4

USB: change bInterval default to 10 ms

2016-09-24T08:07:39+00:00

commit 08c5cd37480f59ea39682f4585d92269be6b1424 upstream. Some full-speed mceusb infrared transceivers contain invalid endpoint descriptors for their interrupt endpoints, with bInterval set to 0. In the past they have worked out okay with the mceusb driver, because the driver sets the bInterval field in the descriptor to 1, overwriting whatever value may have been there before. However, this approach was never sanctioned by the USB core, and in fact it does not work with xHCI controllers, because they use the bInterval value that was present when the configuration was installed. Currently usbcore uses 32 ms as the default interval if the value in the endpoint descriptor is invalid. It turns out that these IR transceivers don't work properly unless the interval is set to 10 ms or below. To work around this mceusb problem, this patch changes the endpoint-descriptor parsing routine, making the default interval value be 10 ms rather than 32 ms. Signed-off-by: Alan Stern Tested-by: Wade Berrier Signed-off-by: Greg Kroah-Hartman

USB: fix typo in wMaxPacketSize validation

2016-09-07T06:32:44+00:00

commit 6c73358c83ce870c0cf32413e5cadb3b9a39c606 upstream. The maximum value allowed for wMaxPacketSize of a high-speed interrupt endpoint is 1024 bytes, not 1023. Signed-off-by: Alan Stern Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") Signed-off-by: Greg Kroah-Hartman

USB: validate wMaxPacketValue entries in endpoint descriptors

2016-09-07T06:32:39+00:00

commit aed9d65ac3278d4febd8665bd7db59ef53e825fe upstream. Erroneous or malicious endpoint descriptors may have non-zero bits in reserved positions, or out-of-bounds values. This patch helps prevent these from causing problems by bounds-checking the wMaxPacketValue entries in endpoint descriptors and capping the values at the maximum allowed. This issue was first discovered and tests were conducted by Jake Lamberson , an intern working for Rosie Hall. Signed-off-by: Alan Stern Reported-by: roswest Tested-by: roswest Signed-off-by: Greg Kroah-Hartman

usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices

2016-09-07T06:32:39+00:00

commit 8a1b2725a60d3267135c15e80984b4406054f650 upstream. Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message

2015-12-01T22:45:52+00:00

usb_parse_ss_endpoint_companion() now decodes the burst multiplier correctly in order to check that it's <= 3, but still uses the wrong expression if warning that it's > 3. Fixes: ff30cbc8da42 ("usb: Use the USB_SS_MULT() macro to get the ...") Signed-off-by: Ben Hutchings Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: store the new usb 3.1 SuperSpeedPlus device capability descriptor

2015-10-04T09:34:17+00:00

If a device supports usb 3.1 SupeerSpeedPlus Gen2 speeds it povides a SuperSpeedPlus device capability descriptor as a part of its BOS descriptor. If we find one while parsing the BOS then save it togeter with the other device capabilities found in the BOS Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb: Use the USB_SS_MULT() macro to get the burst multiplier.

2015-09-22T05:48:53+00:00

Bits 1:0 of the bmAttributes are used for the burst multiplier. The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7 into use. Use the existing USB_SS_MULT() macro instead to make sure the mult value and hence max packet calculations are correct for USB3.1 devices. Note that burst multiplier in bmAttributes is zero based and that the USB_SS_MULT() macro adds one. Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb-core bInterval quirk

2014-08-01T22:47:05+00:00

This patch adds a usb quirk to support devices with interupt endpoints and bInterval values expressed as microframes. The quirk causes the parse endpoint function to modify the reported bInterval to a standards conforming value. There is currently code in the endpoint parser that checks for bIntervals that are outside of the valid range (1-16 for USB 2+ high speed and super speed interupt endpoints). In this case, the code assumes the bInterval is being reported in 1ms frames. As well, the correction is only applied if the original bInterval value is out of the 1-16 range. With this quirk applied to the device, the bInterval will be accurately adjusted from microframes to an exponent. Signed-off-by: James P Michels III Signed-off-by: Greg Kroah-Hartman

Merge 3.14-rc6 into usb-next

2014-03-12T18:40:15+00:00

We want the USB fixes in here as well.

usb: Make DELAY_INIT quirk wait 100ms between Get Configuration requests

2014-03-07T19:46:51+00:00

The DELAY_INIT quirk only reduces the frequency of enumeration failures with the Logitech HD Pro C920 and C930e webcams, but does not quite eliminate them. We have found that adding a delay of 100ms between the first and second Get Configuration request makes the device enumerate perfectly reliable even after several weeks of extensive testing. The reasons for that are anyone's guess, but since the DELAY_INIT quirk already delays enumeration by a whole second, wating for another 10th of that isn't really a big deal for the one other device that uses it, and it will resolve the problems with these webcams. Signed-off-by: Julius Werner Cc: stable Signed-off-by: Greg Kroah-Hartman