BMC/Intel-BMC/linux.git/drivers/usb/chipidea/core.c, branch dev-4.10

usb: chipidea: Only read/write OTGSC from one place

2017-05-14T12:08:25+00:00

commit f60f8ccd54e03c1afafb2b20ceb029a0eaf7a134 upstream. With the id and vbus detection done via extcon we need to make sure we poll the status of OTGSC properly by considering what the extcon is saying, and not just what the register is saying. Let's move this hw_wait_reg() function to the only place it's used and simplify it for polling the OTGSC register. Then we can make certain we only use the hw_read_otgsc() API to read OTGSC, which will make sure we properly handle extcon events. Acked-by: Peter Chen Cc: Greg Kroah-Hartman Cc: "Ivan T. Ivanov" Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Signed-off-by: Stephen Boyd Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb: chipidea: move the lock initialization to core file

2016-11-15T18:25:25+00:00

This can fix below dump when the lock is accessed at host mode due to it is not initialized. [ 46.119638] INFO: trying to register non-static key. [ 46.124643] the code is fine but needs lockdep annotation. [ 46.130144] turning off the locking correctness validator. [ 46.135659] CPU: 0 PID: 690 Comm: cat Not tainted 4.9.0-rc3-00079-g4b75f1d #1210 [ 46.143075] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 46.148923] Backtrace: [ 46.151448] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 46.159038] r7:edf52000 [ 46.161412] r6:60000193 [ 46.163967] r5:00000000 [ 46.165035] r4:c0e25c2c [ 46.169109] [] (show_stack) from [] (dump_stack+0xb4/0xe8) [ 46.176362] [] (dump_stack) from [] (register_lock_class+0x4fc/0x56c) [ 46.184554] r10:c0e25d24 [ 46.187014] r9:edf53e70 [ 46.189569] r8:c1642444 [ 46.190637] r7:ee9da024 [ 46.193191] r6:00000000 [ 46.194258] r5:00000000 [ 46.196812] r4:00000000 [ 46.199185] r3:00000001 [ 46.203259] [] (register_lock_class) from [] (__lock_acquire+0x80/0x10f0) [ 46.211797] r10:c0e25d24 [ 46.214257] r9:edf53e70 [ 46.216813] r8:ee9da024 [ 46.217880] r7:c1642444 [ 46.220435] r6:edcd1800 [ 46.221502] r5:60000193 [ 46.224057] r4:00000000 [ 46.227953] [] (__lock_acquire) from [] (lock_acquire+0x74/0x94) [ 46.235710] r10:00000001 [ 46.238169] r9:edf53e70 [ 46.240723] r8:edf53f80 [ 46.241790] r7:00000001 [ 46.244344] r6:00000001 [ 46.245412] r5:60000193 [ 46.247966] r4:00000000 [ 46.251866] [] (lock_acquire) from [] (_raw_spin_lock_irqsave+0x40/0x54) [ 46.260319] r7:ee1c6a00 [ 46.262691] r6:c062a570 [ 46.265247] r5:20000113 [ 46.266314] r4:ee9da014 [ 46.270393] [] (_raw_spin_lock_irqsave) from [] (ci_port_test_show+0x2c/0x70) [ 46.279280] r6:eebd2000 [ 46.281652] r5:ee9da010 [ 46.284207] r4:ee9da014 [ 46.286810] [] (ci_port_test_show) from [] (seq_read+0x1ac/0x4f8) [ 46.294655] r9:edf53e70 [ 46.297028] r8:edf53f80 [ 46.299583] r7:ee1c6a00 [ 46.300650] r6:00000001 [ 46.303205] r5:00000000 [ 46.304273] r4:eebd2000 [ 46.306850] [] (seq_read) from [] (full_proxy_read+0x54/0x6c) [ 46.314348] r10:00000000 [ 46.316808] r9:c0a6ad30 [ 46.319363] r8:edf53f80 [ 46.320430] r7:00020000 [ 46.322986] r6:b6de3000 [ 46.324053] r5:ee1c6a00 [ 46.326607] r4:c0248b58 [ 46.330505] [] (full_proxy_read) from [] (__vfs_read+0x34/0x118) [ 46.338262] r9:edf52000 [ 46.340635] r8:c0107fc4 [ 46.343190] r7:00020000 [ 46.344257] r6:edf53f80 [ 46.346812] r5:c039e810 [ 46.347879] r4:ee1c6a00 [ 46.350447] [] (__vfs_read) from [] (vfs_read+0x8c/0x11c) [ 46.357597] r9:edf52000 [ 46.359969] r8:c0107fc4 [ 46.362524] r7:edf53f80 [ 46.363592] r6:b6de3000 [ 46.366147] r5:ee1c6a00 [ 46.367214] r4:00020000 [ 46.369782] [] (vfs_read) from [] (SyS_read+0x4c/0xa8) [ 46.376672] r8:c0107fc4 [ 46.379045] r7:00020000 [ 46.381600] r6:b6de3000 [ 46.382667] r5:ee1c6a00 [ 46.385222] r4:ee1c6a00 [ 46.387817] [] (SyS_read) from [] (ret_fast_syscall+0x0/0x1c) [ 46.395314] r7:00000003 [ 46.397687] r6:b6de3000 [ 46.400243] r5:00020000 [ 46.401310] r4:00020000 Cc: Fixes: 26c696c678c4 ("USB: Chipidea: rename struct ci13xxx variables from udc to ci") Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb: chipidea: add system interface for ttctrl.ttha

2016-02-29T05:37:51+00:00

In chipidea IP RTL, there is a very limited design for siTD, the detail like below: There is no Max Packet Size at siTD, so it uses one constant for both Max Packet Size for packet and the packet size for the last transaction when considering schedule. If the ttctrl.ttha does not match against Hub Address field in siTD, this constant is 188 bytes, else this constant is 1023 bytes. If the ttctrl.ttha is non-zero value, RTL will use 188 as this constant, so it will lose the data if the packet size is larger than 188 bytes, eg, if we playback a wav which format is 48khz, 16 bits, 2 channels, the packet size will be 192bytes, but the controller will only send 188 bytes for this packet, the noise will be heared using USB audio card. The use case is single transaction, but higher frame rate. If the ttctr.ttha is zero value, we can send 1023 bytes within one transaction, but the controller will not accept the coming tranaction if it considers the schedule time is less than 1023 bytes. So the limitation is we can't schedule as many as transactions within frame. If the total bytes is already 256 bytes for previous transactions within frame, it can't accept another transaction. The use case is multiple transactions, but less frame rate. Signed-off-by: Peter Chen

usb: chipidea: removing of_find_property

2015-12-24T06:15:27+00:00

call to of_find_property() before of_property_read_u32() is unnecessary. of_property_read_u32() anyway calls to of_find_property() only. Signed-off-by: Saurabh Sengar Signed-off-by: Peter Chen

usb: chipidea: clean up CONFIG_USB_CHIPIDEA_DEBUG reference

2015-12-24T06:15:27+00:00

Since this configuration option has deleted, cleans up all its references. Signed-off-by: Peter Chen Reported-by: Valentin Rothberg

usb: chipidea: support debugfs without CONFIG_USB_CHIPIDEA_DEBUG

2015-12-24T06:15:26+00:00

Since we need to mount debugfs to show/store the things we want to debug, it is duplicated to add another configuration to enable it. Meanwhile, with CONFIG_USB_CHIPIDEA_DEBUG, we can't support chipidea debugfs at runtime. Signed-off-by: Peter Chen Cc: Jun Li

Merge tag 'usb-ci-v4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next

2015-10-23T01:24:38+00:00

Peter writes: USB Chipidea updates for v4.4-rc1 - Use extcon framework for VBUS and ID detect - Add imx6sx and imx7d support - Other small changes

usb: chipidea: Add support for 'phy-clkgate-delay-us' property

2015-10-22T01:24:25+00:00

Add support for the optional 'phy-clkgate-delay-us' property that is used to describe the delay time between putting PHY into low power mode and turning off the PHY clock. Signed-off-by: Li Jun Signed-off-by: Fabio Estevam Signed-off-by: Peter Chen

usb: chipidea: Use extcon framework for VBUS and ID detect

2015-10-22T01:24:25+00:00

On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov Signed-off-by: Peter Chen

usb: common: of_usb_get_dr_mode to usb_get_dr_mode

2015-09-27T15:54:31+00:00

By using the unified device property interface, the function can be made available for all platforms and not just the ones using DT. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi