BMC/Intel-BMC/linux.git/drivers/tty, branch v4.18.10

tty: fix termios input-speed encoding

2018-09-26T06:39:38+00:00

[ Upstream commit fada18c48d774b9e837928ecdce6a5d5fdd11ee7 ] Make sure to clear the CIBAUD bits before OR-ing the new mask when encoding the termios input baud rate. This could otherwise lead to an incorrect input rate being reported back and incidentally set on subsequent termios updates. Fixes: edc6afc54968 ("[PATCH] tty: switch to ktermios and new framework") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

tty: fix termios input-speed encoding when using BOTHER

2018-09-26T06:39:38+00:00

[ Upstream commit 1cee38f0363a88db374e50b232ca17b9a4c12fa0 ] When the termios CIBAUD bits are left unset (i.e. B0), we use the same output and input speed and should leave CIBAUD unchanged. When the user requests a rate using BOTHER and c_ospeed which the driver cannot set exactly, the driver can report back the actual baud rate using tty_termios_encode_baud_rate(). If this rate is close enough to a standard rate however, we could end up setting CIBAUD to a Bfoo value despite the user having left it unset. This in turn could lead to an unexpected input rate being set on subsequent termios updates. Fix this by using a zero tolerance value also for the input rate when CIBAUD is clear so that the matching logic works as expected. Fixes: 78137e3b34e1 ("[PATCH] tty: improve encode_baud_rate logic") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

serial: 8250: of: Correct of_platform_serial_setup() error handling

2018-09-26T06:39:38+00:00

[ Upstream commit b29330d829042512fabb2bfa3bbfa32df1115594 ] Don't dispose IRQ mapping before it has been created. Fixes: aa9594740 ("serial: 8250_of: Add IO space support") Signed-off-by: Alexander Sverdlin Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

tty: rocket: Fix possible buffer overwrite on register_PCI

2018-09-19T20:41:27+00:00

[ Upstream commit 0419056ec8fd01ddf5460d2dba0491aad22657dd ] If number of isa and pci boards exceed NUM_BOARDS on the path rp_init()->init_PCI()->register_PCI() then buffer overwrite occurs in register_PCI() on assign rcktpt_io_addr[i]. The patch adds check on upper bound for index of registered board in register_PCI. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

uart: fix race between uart_put_char() and uart_shutdown()

2018-09-09T08:32:34+00:00

commit a5ba1d95e46ecaea638ddd7cd144107c783acb5d upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d #20 [ffff88085c6dbeb0] kthread at ffffffff81096384 #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 : ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen Cc: stable Signed-off-by: Greg Kroah-Hartman

pty: fix O_CLOEXEC for TIOCGPTPEER

2018-08-24T11:04:48+00:00

commit 36ecc1481dc8d8c52d43ba18c6b642c1d2fde789 upstream. It was being ignored because the flags were not passed to fd allocation. Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Signed-off-by: Matthijs van Duin Acked-by: Aleksa Sarai Cc: stable Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Add ACPI support for uart on Broadcom SoC

2018-08-22T05:43:43+00:00

commit 784c29eda5b4e28c3a56aa90b3815f9a1b0cfdc1 upstream. Add ACPI identifier HID for UART DW 8250 on Broadcom SoCs to match the HID passed through ACPI tables to enable UART controller. Signed-off-by: Srinath Mannam Reviewed-by: Vladimir Olovyannikov Tested-by: Vladimir Olovyannikov Reviewed-by: Andy Shevchenko Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: always set baud rate in dw8250_set_termios

2018-08-22T05:43:42+00:00

commit dfcab6ba573445c703235ab6c83758eec12d7f28 upstream. dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is NULL. This happens during resume. Call Trace: ... [ 54.928108] dw8250_set_termios+0x162/0x170 [ 54.928114] serial8250_set_termios+0x17/0x20 [ 54.928117] uart_change_speed+0x64/0x160 [ 54.928119] uart_resume_port ... So the baud rate is not restored after S3 and breaks the apps who use UART, for example, console and bluetooth etc. We address this issue by setting the baud rate irrespective of arg "old", just like the drivers for other 8250 IPs. This is tested with Intel Broxton platform. Signed-off-by: Chen Hu Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms") Cc: Heikki Krogerus Cc: stable Reviewed-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

serial: 8250_exar: Read INT0 from slave device, too

2018-08-22T05:43:42+00:00

commit 60ab0fafc4b652fcaf7cbc3bb8555a0cf1149c28 upstream. The sleep wake-up refactoring that I introduced in commit c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling") did not account for devices with a slave device on the expansion port. This patch pokes the INT0 register in the slave device, if present, in order to ensure that MSI interrupts don't get permanently "stuck" because of a sleep wake-up interrupt as described here: commit 2c0ac5b48a35 ("serial: exar: Fix stuck MSIs") This also converts an ioread8() to readb() in order to provide visual consistency with the MMIO-only accessors used elsewhere in the driver. Reported-by: Andy Shevchenko Signed-off-by: Aaron Sierra Fixes: c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling") Reviewed-by: Andy Shevchenko Cc: stable Signed-off-by: Greg Kroah-Hartman

tty: serial: 8250: Revert NXP SC16C2552 workaround

2018-08-22T05:43:42+00:00

commit 47ac76662ca9c5852fd353093f19de3ae85f2e66 upstream. Revert commit ecb988a3b7985913d1f0112f66667cdd15e40711: tty: serial: 8250: 8250_core: NXP SC16C2552 workaround The above commit causes userland application to no longer write correctly its first write to a dumb terminal connected to /dev/ttyS0. This commit seems to be the culprit. It's as though the TX FIFO is being reset during that write. What should be displayed is: PSW 80000000 INST 00000000 HALT // What is displayed is some variation of: T 00000000 HAL// Reverting this commit via this patch fixes my problem. Signed-off-by: Mark Hounschell Fixes: ecb988a3b798 ("tty: serial: 8250: 8250_core: NXP SC16C2552 workaround") Cc: stable Signed-off-by: Greg Kroah-Hartman