BMC/Intel-BMC/linux.git/drivers/tty, branch dev-4.4

Merge tag 'v4.4.33' into dev-4.4

2016-11-20T23:38:47+00:00

This is the 4.4.33 stable release Signed-off-by: Joel Stanley

tty/serial: at91: fix hardware handshake on Atmel platforms

2016-11-18T09:48:36+00:00

commit 9bcffe7575b721d7b6d9b3090fe18809d9806e78 upstream. After commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), the hardware handshake wasn't functional anymore on Atmel platforms (beside SAMA5D2). To understand why, one has to understand the flag ATMEL_US_USMODE_HWHS first: Before commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), this flag was never set. Thus, the CTS/RTS where only handled by serial_core (and everything worked just fine). This commit introduced the use of the ATMEL_US_USMODE_HWHS flag, enabling it for all boards when the user space enables flow control. When the ATMEL_US_USMODE_HWHS is set, the Atmel USART controller handles a part of the flow control job: - disable the transmitter when the CTS pin gets high. - drive the RTS pin high when the DMA buffer transfer is completed or PDC RX buffer full or RX FIFO is beyond threshold. (depending on the controller version). NB: This feature is *not* mandatory for the flow control to work. (Nevertheless, it's very useful if low latencies are needed.) Now, the specifics of the ATMEL_US_USMODE_HWHS flag: - For platforms with DMAC and no FIFOs (sam9x25, sam9x35, sama5D3, sama5D4, sam9g15, sam9g25, sam9g35)* this feature simply doesn't work. ( source: https://lkml.org/lkml/2016/9/7/598 ) Tested it on sam9g35, the RTS pins always stays up, even when RXEN=1 or a new DMA transfer descriptor is set. => ATMEL_US_USMODE_HWHS must not be used for those platforms - For platforms with a PDC (sam926{0,1,3}, sam9g10, sam9g20, sam9g45, sam9g46)*, there's another kind of problem. Once the flag ATMEL_US_USMODE_HWHS is set, the RTS pin can't be driven anymore via RTSEN/RTSDIS in USART Control Register. The RTS pin can only be driven by enabling/disabling the receiver or setting RCR=RNCR=0 in the PDC (Receive (Next) Counter Register). => Doing this is beyond the scope of this patch and could add other bugs, so the original (and working) behaviour should be set for those platforms (meaning ATMEL_US_USMODE_HWHS flag should be unset). - For platforms with a FIFO (sama5d2)*, the RTS pin is driven according to the RX FIFO thresholds, and can be also driven by RTSEN/RTSDIS in USART Control Register. No problem here. (This was the use case of commit 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled")) NB: If the CTS pin declared as a GPIO in the DTS, (for instance cts-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_LOW>), the transmitter will be disabled. => ATMEL_US_USMODE_HWHS flag can be set for this platform ONLY IF the CTS pin is not a GPIO. So, the only case when ATMEL_US_USMODE_HWHS can be enabled is when (atmel_use_fifo(port) && !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) Tested on all Atmel USART controller flavours: AT91SAM9G35-CM (DMAC flavour), AT91SAM9G20-EK (PDC flavour), SAMA5D2xplained (FIFO flavour). * the list may not be exhaustive Fixes: 1cf6e8fc8341 ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") Signed-off-by: Richard Genoud Acked-by: Alexandre Belloni Acked-by: Cyrille Pitchen Acked-by: Uwe Kleine-König [nicolas.ferre@atmel.com: adapt to 4.4.x kernel for stable by adding the atmel_port variable declaration which was missing] Signed-off-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman

tty: vt, fix bogus division in csi_J

2016-11-10T15:36:37+00:00

commit 42acfc6615f47e465731c263bee0c799edb098f2 upstream. In csi_J(3), the third parameter of scr_memsetw (vc_screenbuf_size) is divided by 2 inappropriatelly. But scr_memsetw expects size, not count, because it divides the size by 2 on its own before doing actual memset-by-words. So remove the bogus division. Signed-off-by: Jiri Slaby Cc: Petr Písař Fixes: f8df13e0a9 (tty: Clean console safely) Signed-off-by: Greg Kroah-Hartman

tty: limit terminal size to 4M chars

2016-11-10T15:36:34+00:00

commit 32b2921e6a7461fe63b71217067a6cf4bddb132f upstream. Size of kmalloc() in vc_do_resize() is controlled by user. Too large kmalloc() size triggers WARNING message on console. Put a reasonable upper bound on terminal size to prevent WARNINGs. Signed-off-by: Dmitry Vyukov CC: David Rientjes Cc: One Thousand Gnomes Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Peter Hurley Cc: linux-kernel@vger.kernel.org Cc: syzkaller@googlegroups.com Signed-off-by: Greg Kroah-Hartman

vt: clear selection before resizing

2016-11-10T15:36:34+00:00

commit 009e39ae44f4191188aeb6dfbf661b771dbbe515 upstream. When resizing a vt its selection may exceed the new size, resulting in an invalid memory access [1]. Clear the selection before resizing. [1] http://lkml.kernel.org/r/CACT4Y+acDTwy4umEvf5ROBGiRJNrxHN4Cn5szCXE5Jw-d1B=Xw@mail.gmail.com Reported-and-tested-by: Dmitry Vyukov Signed-off-by: Scot Doyle Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Check the data->pclk when get apb_pclk

2016-10-22T10:26:54+00:00

commit e16b46f190a22587898b331f9d58583b0b166c9a upstream. It should check the data->pclk, not data->clk when get apb_pclk. Fixes: c8ed99d4f6a8("serial: 8250_dw: Add support for deferred probing") Signed-off-by: Kefeng Wang Tested-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

Merge tag 'v4.4.26' into dev-4.4

2016-10-21T01:33:35+00:00

This is the 4.4.26 stable release

serial: 8250: added acces i/o products quad and octal serial cards

2016-09-24T08:07:38+00:00

commit c8d192428f52f244130b84650ad616df09f2b1e1 upstream. Added devices ids for acces i/o products quad and octal serial cards that make use of existing Pericom PI7C9X7954 and PI7C9X7958 configurations . Signed-off-by: Jimi Damon Signed-off-by: Greg Kroah-Hartman

serial: 8250_mid: fix divide error bug if baud rate is 0

2016-09-24T08:07:38+00:00

commit 47b34d2ef266e2c283b514d65c8963c2ccd42474 upstream. Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Reported-by: "Mendez Salinas, Fernando" Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID") Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

tty/serial: atmel: fix RS485 half duplex with DMA

2016-08-20T16:09:17+00:00

commit 0058f0871efe7b01c6f2b3046c68196ab73e96da upstream. When using DMA, half duplex doesn't work properly because rx is not stopped before starting tx. Ensure we call atmel_stop_rx() in the DMA case. Signed-off-by: Alexandre Belloni Acked-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman