BMC/Intel-BMC/linux.git/drivers/pinctrl/nomadik, branch dev-4.6

pinctrl: nomadik: fix pull debug print inversion

2016-03-31T08:45:26+00:00

Pull up was reported as pull down and vice versa. Fix this. Fixes: 8f1774a2a971 "pinctrl: nomadik: improve GPIO debug prints" Signed-off-by: Linus Walleij

Merge tag 'v4.5-rc5' into devel

2016-03-10T02:29:25+00:00

Linux 4.5-rc5

pinctrl: nomadik: stn8815 CLCD alternate functions

2016-01-28T11:26:34+00:00

The STn8815 has 22 dedicated pins for CLCD with up to 16 bits in parallel, but pins 32 thru 39 can be used for an additional CLCD signal lines 16 thru 23. Signed-off-by: Linus Walleij

pinctrl: nomadik: hide unused functions

2016-01-28T10:36:00+00:00

The nomadik pinctrl driver has two functions that are only used for debugfs output and are otherwise unused: drivers/pinctrl/nomadik/pinctrl-abx500.c:194:12: error: 'abx500_get_pull_updown' defined but not used drivers/pinctrl/nomadik/pinctrl-abx500.c:471:12: error: 'abx500_get_mode' defined but not used This makes the function definitions conditional to avoid the harmless warnings. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Walleij

pinctrl: abx500: use gpiochip data pointer

2016-01-05T13:14:51+00:00

This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by: Linus Walleij

pinctrl: nomadik: use gpiochip data pointer

2016-01-05T13:14:50+00:00

This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by: Linus Walleij

gpio: change member .dev to .parent

2015-11-19T08:24:35+00:00

The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen Cc: Rafał Miłecki Cc: Richard Purdie Cc: Mauro Carvalho Chehab Cc: Alek Du Cc: Jaroslav Kysela Cc: Takashi Iwai Acked-by: Dmitry Torokhov Acked-by: Greg Kroah-Hartman Acked-by: Lee Jones Acked-by: Jiri Kosina Acked-by: Hans-Christian Egtvedt Acked-by: Jacek Anaszewski Signed-off-by: Linus Walleij

pinctrl: replace trivial implementations of gpio_chip request/free

2015-10-16T20:20:21+00:00

Replace all trivial request/free callbacks that do nothing but call into pinctrl code with the generic versions. Signed-off-by: Jonas Gorski Acked-by: Bjorn Andersson Acked-by: Heiko Stuebner Acked-by: Eric Anholt Acked-by: Mika Westerberg Acked-by: Andrew Bresticker Acked-by: Baruch Siach Acked-by: Matthias Brugger Acked-by: Lee Jones Acked-by: Laxman Dewangan Acked-by: Maxime Ripard Signed-off-by: Linus Walleij

genirq: Remove irq argument from irq flow handlers

2015-09-16T13:47:51+00:00

Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner Cc: Julia Lawall Cc: Jiang Liu

Merge tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2015-09-04T17:22:09+00:00

Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.3 development cycle. Like with GPIO it's a lot of stuff. If my subsystems are any sign of the overall tempo of the kernel v4.3 will be a gigantic diff. [ It looks like 4.3 is calmer than 4.2 in most other subsystems, but we'll see - Linus ] Core changes: - It is possible configure groups in debugfs. - Consolidation of chained IRQ handler install/remove replacing all call sites where irq_set_handler_data() and irq_set_chained_handler() were done in succession with a combined call to irq_set_chained_handler_and_data(). This series was created by Thomas Gleixner after the problem was observed by Russell King. - Tglx also made another series of patches switching __irq_set_handler_locked() for irq_set_handler_locked() which is way cleaner. - Tglx also wrote a good bunch of patches to make use of irq_desc_get_xxx() accessors and avoid looking up irq_descs from IRQ numbers. The goal is to get rid of the irq number from the handlers in the IRQ flow which is nice. Driver feature enhancements: - Power management support for the SiRF SoC Atlas 7. - Power down support for the Qualcomm driver. - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks in IRQ handlers to play nice with the realtime patch set. - Rework and new modes handling for Qualcomm SPMI-MPP. - Pinconf power source config for SH PFC. New drivers and subdrivers: - A new driver for Conexant Digicolor CX92755. - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5, ProXtream2 and PH1-LD6b SoC pin control support. - Reverse-egineered the S/PDIF settings for the Allwinner sun4i driver. - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs - A new Freescale i.mx6ul subdriver. Cleanup: - Remove platform data support in a number of SH PFC subdrivers" * tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits) pinctrl: at91: fix null pointer dereference pinctrl: mediatek: Implement wake handler and suspend resume pinctrl: mediatek: Fix multiple registration issue. pinctrl: sh-pfc: r8a7794: add USB pin groups pinctrl: at91: Use generic irq_{request,release}_resources() pinctrl: cherryview: Use raw_spinlock for locking pinctrl: baytrail: Use raw_spinlock for locking pinctrl: imx6ul: Remove .owner field pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks pinctrl: sun4i: add spdif to pin description. pinctrl: atlas7: clear ugly branch statements for pull and drivestrength pinctrl: baytrail: Serialize all register access pinctrl: baytrail: Drop FSF mailing address pinctrl: rockchip: only enable gpio clock when it setting pinctrl/mediatek: fix spelling mistake in dev_err error message pinctrl: cherryview: Serialize all register access pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting pinctrl: nomadik: reflect current input value ...