BMC/Intel-BMC/linux.git/drivers/phy/ti/Kconfig, branch dev-5.1

phy: ti: usb2: fix OMAP_CONTROL_PHY dependency

2019-05-31T13:43:31+00:00

[ Upstream commit d41ce98a122c13ea77938af04ef06fb12ae0c69e ] With randconfig build testing on arm64, we can run into a configuration that has CONFIG_OMAP_CONTROL_PHY=m and CONFIG_OMAP_USB2=y, which in turn causes a link failure: drivers/phy/ti/phy-omap-usb2.o: In function `omap_usb_phy_power': phy-omap-usb2.c:(.text+0x17c): undefined reference to `omap_control_phy_power' I could not come up with a good way to correctly describe the relation of the two symbols, but if we just select CONFIG_OMAP_CONTROL_PHY during compile testing, we can no longer run into the broken configuration. Fixes: 6777cee3a872 ("phy: ti: usb2: Add support for AM654 USB2 PHY") Signed-off-by: Arnd Bergmann Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

Merge tag 'phy-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

2019-02-12T13:59:43+00:00

Kishon writes: phy: for 5.1 *) Add a new driver to support Armada 3700 COMPHY IP (supports SATA, USB3, PCIe) *) Add a new driver to support Armada UTMI PHY *) Add a new driver to support Cadence D-PHY *) Extend omap-usb2 PHY driver to be used for AM654 USB2 PHY *) Extend qcom-qmp PHY driver to be used for UFS PHY and USB3 PHY in Qualcomm MSM8998 *) Extend qcom-qusb2 PHY driver to support QUSB2 PHY in Qualcomm MSM8998 *) Remove module specific code that is present for drivers that can be only built-in *) Allow Freescale IMX8MQ USB to be used for multiple SoCs and not just i.MX8MQ *) Cleanups such as switch to SPDX identifier, use readl_poll_timeout macro, remove unused headers etc., Signed-off-by: Kishon Vijay Abraham I * tag 'phy-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (32 commits) phy: qcom-qmp: Add QMP UFS PHY support for msm8998 dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy phy: bcm-sr-pcie: Change operation when PIPEMUX=1 phy: Add Cadence D-PHY support dt-bindings: phy: Move the Cadence D-PHY bindings phy: dphy: Clarify lanes parameter documentation phy: dphy: Change units of wakeup and init parameters phy: dphy: Remove unused header MAINTAINERS: phy: fill Armada 3700 PHY drivers entry dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings phy: add A3700 UTMI PHY driver MAINTAINERS: phy: add entry for Armada 3700 COMPHY driver dt-bindings: phy: mvebu-comphy: extend the file to describe a3700 bindings phy: add A3700 COMPHY support phy: mvebu-cp110-comphy: fix port check in ->xlate() phy: armada375-usb2: switch to SPDX license identifier phy: make phy-armada375-usb2 explicitly non-modular phy: make phy-mvebu-sata explicitly non-modular phy: make phy-core explicitly non-modular phy: qcom-qusb2: Add QUSB2 PHY support for msm8998 ...

phy: ti: usb2: Add support for AM654 USB2 PHY

2019-02-07T05:40:41+00:00

Add support for the USB2 PHY on the AM654 SoC. Signed-off-by: Roger Quadros Signed-off-by: Sekhar Nori Signed-off-by: Kishon Vijay Abraham I

phy: ti: Don't depend on OMAP_OCP2SCP

2019-02-07T05:40:38+00:00

TI_PIPE3 and OMAP_USB2 don't depend on OMAP_OCP2SCP for build. Signed-off-by: Roger Quadros Signed-off-by: Sekhar Nori Signed-off-by: Kishon Vijay Abraham I

phy: ti: Fix compilation failures without REGMAP

2019-01-07T19:21:37+00:00

This driver requires regmap or the compile fails: drivers/phy/ti/phy-gmii-sel.c:43:27: error: array type has incomplete element type ‘struct reg_field’ const struct reg_field (*regfields)[PHY_GMII_SEL_LAST]; Add it to kconfig. Signed-off-by: Jason Gunthorpe Signed-off-by: David S. Miller

phy: ti: introduce phy-gmii-sel driver

2018-12-12T04:31:40+00:00

TI am335x/am437x/dra7(am5)/dm814x CPSW3G Ethernet Subsystem supports two 10/100/1000 Ethernet ports with selectable G/MII, RMII, and RGMII interfaces. The interface mode is selected by configuring the MII mode selection register(s) (GMII_SEL) in the System Control Module chapter (SCM). GMII_SEL register(s) and bit fields placement in SCM are different between SoCs while fields meaning is the same. Historically CPSW external Port's interface mode selection configuration was introduced using custom API and driver cpsw-phy-sel.c. This leads to unnecessary driver, DT binding and custom API support effort. This patch introduces CPSW Port's PHY Interface Mode selection Driver (phy-gmii-sel) which implements standard Linux PHY interface and used as a replacement for TI's specific driver cpsw-phy-sel.c and corresponding custom API. Cc: Kishon Vijay Abraham I Cc: Tony Lindgren Signed-off-by: Grygorii Strashko Signed-off-by: Kishon Vijay Abraham I

phy: Group vendor specific phy drivers

2017-06-01T09:58:33+00:00

Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam Acked-by: Heiko Stuebner Acked-by: Viresh Kumar Acked-by: Krzysztof Kozlowski Acked-by: Yoshihiro Shimoda Reviewed-by: Jaehoon Chung Cc: Kishon Vijay Abraham I Cc: David S. Miller Cc: Geert Uytterhoeven Cc: Yoshihiro Shimoda Cc: Guenter Roeck Cc: Heiko Stuebner Cc: Viresh Kumar Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Sylwester Nawrocki Cc: Krzysztof Kozlowski Cc: Jaehoon Chung Cc: Stephen Boyd Cc: Martin Blumenstingl Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I