BMC/Intel-BMC/linux.git/drivers/pci, branch dev-5.1

ACPI/PCI: PM: Add missing wakeup.flags.valid checks

2019-06-22T06:09:11+00:00

[ Upstream commit 9a51c6b1f9e0239a9435db036b212498a2a3b75c ] Both acpi_pci_need_resume() and acpi_dev_needs_resume() check if the current ACPI wakeup configuration of the device matches what is expected as far as system wakeup from sleep states is concerned, as reflected by the device_may_wakeup() return value for the device. However, they only should do that if wakeup.flags.valid is set for the device's ACPI companion, because otherwise the wakeup.prepare_count value for it is meaningless. Add the missing wakeup.flags.valid checks to these functions. Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg Signed-off-by: Sasha Levin

PCI: xilinx: Check for __get_free_pages() failure

2019-06-15T09:53:04+00:00

[ Upstream commit 699ca30162686bf305cdf94861be02eb0cf9bda2 ] If __get_free_pages() fails, return -ENOMEM to avoid a NULL pointer dereference. Signed-off-by: Kangjie Lu Signed-off-by: Lorenzo Pieralisi Reviewed-by: Steven Price Reviewed-by: Mukesh Ojha Signed-off-by: Sasha Levin

PCI: rcar: Fix 64bit MSI message address handling

2019-06-15T09:53:03+00:00

[ Upstream commit 954b4b752a4c4e963b017ed8cef4c453c5ed308d ] The MSI message address in the RC address space can be 64 bit. The R-Car PCIe RC supports such a 64bit MSI message address as well. The code currently uses virt_to_phys(__get_free_pages()) to obtain a reserved page for the MSI message address, and the return value of which can be a 64 bit physical address on 64 bit system. However, the driver only programs PCIEMSIALR register with the bottom 32 bits of the virt_to_phys(__get_free_pages()) return value and does not program the top 32 bits into PCIEMSIAUR, but rather programs the PCIEMSIAUR register with 0x0. This worked fine on older 32 bit R-Car SoCs, however may fail on new 64 bit R-Car SoCs. Since from a PCIe controller perspective, an inbound MSI is a memory write to a special address (in case of this controller, defined by the value in PCIEMSIAUR:PCIEMSIALR), which triggers an interrupt, but never hits the DRAM _and_ because allocation of an MSI by a PCIe card driver obtains the MSI message address by reading PCIEMSIAUR:PCIEMSIALR in rcar_msi_setup_irqs(), incorrectly programmed PCIEMSIAUR cannot cause memory corruption or other issues. There is however the possibility that if virt_to_phys(__get_free_pages()) returned address above the 32bit boundary _and_ PCIEMSIAUR was programmed to 0x0 _and_ if the system had physical RAM at the address matching the value of PCIEMSIALR, a PCIe card driver could allocate a buffer with a physical address matching the value of PCIEMSIALR and a remote write to such a buffer by a PCIe card would trigger a spurious MSI. Fixes: e015f88c368d ("PCI: rcar: Add support for R-Car H3 to pcie-rcar") Signed-off-by: Marek Vasut Signed-off-by: Lorenzo Pieralisi Reviewed-by: Simon Horman Reviewed-by: Geert Uytterhoeven Cc: Geert Uytterhoeven Cc: Phil Edworthy Cc: Simon Horman Cc: Wolfram Sang Cc: linux-renesas-soc@vger.kernel.org Signed-off-by: Sasha Levin

PCI: rcar: Fix a potential NULL pointer dereference

2019-06-15T09:53:03+00:00

[ Upstream commit f0d14edd2ba43b995bef4dd5da5ffe0ae19321a1 ] In case __get_free_pages() fails and returns NULL, fix the return value to -ENOMEM and release resources to avoid dereferencing a NULL pointer. Signed-off-by: Kangjie Lu Signed-off-by: Lorenzo Pieralisi Reviewed-by: Ulrich Hecht Reviewed-by: Geert Uytterhoeven Reviewed-by: Simon Horman Signed-off-by: Sasha Levin

PCI: dwc: Remove default MSI initialization for platform specific MSI chips

2019-06-15T09:53:03+00:00

[ Upstream commit fd8a44bd5b76dc77133f814dd63d414d49dc74c0 ] Platforms which populate msi_host_init() have their own MSI controller logic. Writing to MSI control registers on platforms which do not use Designware's MSI controller logic might have side effects. To be safe, do not write to MSI control registers if the platform uses its own MSI controller logic instead of Designware's MSI one. Signed-off-by: Kishon Vijay Abraham I [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Sasha Levin

PCI: rpadlpar: Fix leaked device_node references in add/remove paths

2019-06-15T09:53:02+00:00

[ Upstream commit fb26228bfc4ce3951544848555c0278e2832e618 ] The find_dlpar_node() helper returns a device node with its reference incremented. Both the add and remove paths use this helper for find the appropriate node, but fail to release the reference when done. Annotate the find_dlpar_node() helper with a comment about the incremented reference count and call of_node_put() on the obtained device_node in the add and remove paths. Also, fixup a reference leak in the find_vio_slot() helper where we fail to call of_node_put() on the vdevice node after we iterate over its children. Signed-off-by: Tyrel Datwyler Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64

2019-06-15T09:53:01+00:00

[ Upstream commit f316a2b53cd7f37963ae20ec7072eb27a349a4ce ] hook_fault_code() is an ARM32 specific API for hooking into data abort. AM65X platforms (that integrate ARM v8 cores and select CONFIG_ARM64 as arch) rely on pci-keystone.c but on them the enumeration of a non-present BDF does not trigger a bus error, so the fixup exception provided by calling hook_fault_code() is not needed and can be guarded with CONFIG_ARM. Signed-off-by: Kishon Vijay Abraham I [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Sasha Levin

PCI: keystone: Invoke phy_reset() API before enabling PHY

2019-06-15T09:53:01+00:00

[ Upstream commit b22af42b3e57c3a49a4c4a54c7d8a1363af75e90 ] SERDES connected to the PCIe controller in AM654 requires power on reset enable (POR_EN) to be set in the SERDES. The SERDES driver sets POR_EN in the reset ops and it has to be invoked before init or enable ops. In order for SERDES driver to set POR_EN, invoke the phy_reset() API in pci-keystone driver. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Lorenzo Pieralisi Signed-off-by: Sasha Levin

switchtec: Fix unintended mask of MRPC event

2019-06-15T09:53:00+00:00

[ Upstream commit 083c1b5e50b701899dc32445efa8b153685260d5 ] When running application tool switchtec-user's `firmware update` and `event wait` commands concurrently, sometimes the firmware update speed reduced significantly. It is because when the MRPC event happened after MRPC event occurrence check but before the event mask loop reaches its header register in event ISR, the MRPC event would be masked unintentionally. Since there's no chance to enable it again except for a module reload, all the following MRPC execution completion checks time out. Fix this bug by skipping the mask operation for MRPC event in event ISR, same as what we already do for LINK event. Fixes: 52eabba5bcdb ("switchtec: Add IOCTLs to the Switchtec driver") Signed-off-by: Wesley Sheng Signed-off-by: Bjorn Helgaas Reviewed-by: Logan Gunthorpe Signed-off-by: Sasha Levin

PCI: designware-ep: Use aligned ATU window for raising MSI interrupts

2019-06-15T09:52:59+00:00

[ Upstream commit 6b7330303a8186fb211357e6d379237fe9d2ece1 ] Certain platforms like K2G reguires the outbound ATU window to be aligned. The alignment size is already present in mem->page_size. Use the alignment size present in mem->page_size to configure an aligned ATU window. In order to raise an interrupt, CPU has to write to address offset from the start of the window unlike before where writes were always to the beginning of the ATU window. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Lorenzo Pieralisi Signed-off-by: Sasha Levin