BMC/Intel-BMC/linux.git/drivers/of/irq.c, branch dev-4.6

of/irq: Fix msi-map calculation for nonzero rid-base

2016-02-11T22:51:41+00:00

The existing msi-map code is fine for shifting the entire RID space upwards, but attempting finer-grained remapping reveals a bug. It turns out that we are mistakenly treating the msi-base part as an offset, not as a new base to remap onto, so things get squiffy when rid-base is nonzero. Fix this, and at the same time add a sanity check against having msi-map-mask clash with a nonzero rid-base, as that's another thing one can easily get wrong. CC: Signed-off-by: Robin Murphy Reviewed-by: Marc Zyngier Tested-by: Stuart Yoder Acked-by: Mark Rutland Acked-by: David Daney Signed-off-by: Rob Herring

Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-01-31T22:48:58+00:00

Pull IRQ fixes from Ingo Molnar: "Mostly irqchip driver fixes, but also an irq core crash fix and a build fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mxs: Add missing set_handle_irq() irqchip/atmel-aic: Fix wrong bit operation for IRQ priority irqchip/gic-v3-its: Recompute the number of pages on page size change base: Export platform_msi_domain_[alloc,free]_irqs of: MSI: Simplify irqdomain lookup irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token irqchip: Fix dependencies for archs w/o HAS_IOMEM irqchip/s3c24xx: Mark init_eint as __maybe_unused genirq: Validate action before dereferencing it in handle_irq_event_percpu()

of: MSI: Simplify irqdomain lookup

2016-01-26T15:00:15+00:00

So far, when trying to associate a device with its MSI domain, we first lookup the domain using a MSI token, and if this doesn't return anything useful, we pick up any domain matching the same node. This logic is broken for two reasons: 1) Only the generic MSI code (PCI or platform) sets this token to PCI/MSI or platform MSI. So we're guaranteed that if there is something to be found, we will find it with the first call. 2) If we have a convoluted situation where: - a single node implements both wired and MSI interrupts - MSI support for that HW hasn't been compiled in we'll end up using the wired domain for MSIs anyway, and things break badly. So let's just remove __of_get_msi_domain, and replace it by a direct call to irq_find_matching_host, because that's what we really want. Signed-off-by: Marc Zyngier Acked-by: Rob Herring Cc: Greg Kroah-Hartman Cc: Frank Rowand Cc: Grant Likely Cc: Thomas Petazzoni Cc: Jiang Liu Link: http://lkml.kernel.org/r/1453816347-32720-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner

Merge tag 'devicetree-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2016-01-14T19:13:28+00:00

Pull DeviceTree updates from Rob Herring: - Rework and export the changeset API to make it available to users other than DT overlays - ARM secure devices binding - OCTEON USB binding - Clean-up of various SRAM binding docs - Various other binding doc updates * tag 'devicetree-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (21 commits) drivers/of: Export OF changeset functions Fix documentation for adp1653 DT ARM: psci: Fix indentation in DT bindings of/platform: export of_default_bus_match_table of/unittest: Show broken behaviour in the platform bus of: fix declaration of of_io_request_and_map of/address: replace printk(KERN_ERR ...) with pr_err(...) of/irq: optimize device node matching loop in of_irq_init() dt-bindings: tda998x: Document the required 'port' node. net/macb: bindings doc: Merge cdns-emac to macb dt-bindings: Misc fix for the ATH79 DDR controllers dt-bindings: Misc fix for the ATH79 MISC interrupt controllers Documentation: dt: Add bindings for Secure-only devices dt-bindings: ARM: add arm,cortex-a72 compatible string ASoC: Atmel: ClassD: add GCK's parent clock in DT binding DT: add Olimex to vendor prefixes Documentation: fsl-quadspi: Add fsl,ls1021-qspi compatible string Documentation/devicetree: document OCTEON USB bindings usb: misc: usb3503: Describe better how to bind clock to the hub dt-bindings: Consolidate SRAM bindings from all vendors ...

of/irq: optimize device node matching loop in of_irq_init()

2015-12-09T21:30:57+00:00

Currently, of_irq_init() iterates over interrupt controller nodes with for_each_matching_node(), and then gets each init function with of_match_node() later. This routine can be optimized with for_each_matching_node_and_match(). It allows to get the interrupt controller node and its init function at the same time, saving __of_match_node() callings. Signed-off-by: Masahiro Yamada Signed-off-by: Rob Herring

of/irq: Export of_irq_find_parent again

2015-12-09T15:08:36+00:00

of_irq_find_parent was made static since it had no users outside of of_irq.c. Export it again since we are going to use it again. Signed-off-by: Carlo Caione [robh: move of_irq_find_parent to correct ifdef section] Signed-off-by: Rob Herring

Merge tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2015-11-06T20:17:09+00:00

Pull DeviceTree updates from Rob Herring: "A fairly large (by DT standards) pull request this time with the majority being some overdue moving DT binding docs around to consolidate similar bindings. - DT binding doc consolidation moving similar bindings to common locations. The majority of these are display related which were scattered in video/, fb/, drm/, gpu/, and panel/ directories. - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all dtbs in the tree for most arches with dts files (except powerpc for now). - OF_IRQ=n fixes for user enabled CONFIG_OF. - of_node_put ref counting fixes from Julia Lawall. - Common DT binding for wakeup-source and deprecation of all similar bindings. - DT binding for PXA LCD controller. - Allow ignoring failed PCI resource translations in order to ignore 64-bit addresses on non-LPAE 32-bit kernels. - Support setting the NUMA node from DT instead of only from parent device. - Couple of earlycon DT parsing fixes for address and options" * tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits) MAINTAINERS: update DT binding doc locations devicetree: add Sigma Designs vendor prefix of: simplify arch_find_n_match_cpu_physical_id() function Documentation: arm: Fixed typo in socfpga fpga mgr example Documentation: devicetree: fix reference to legacy wakeup properties Documentation: devicetree: standardize/consolidate on "wakeup-source" property drivers: of: removing assignment of 0 to static variable xtensa: enable building of all dtbs mips: enable building of all dtbs metag: enable building of all dtbs metag: use common make variables for dtb builds h8300: enable building of all dtbs arm64: enable building of all dtbs arm: enable building of all dtbs arc: enable building of all dtbs arc: use common make variables for dtb builds of: add config option to enable building of all dtbs of/fdt: fix error checking for earlycon address of/overlay: add missing of_node_put of/platform: add missing of_node_put ...

of/irq: add missing of_node_put

2015-10-22T14:26:32+00:00

for_each_matching_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // @@ local idexpression n; expression e; identifier l; @@ for_each_matching_node(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? goto l; ) ... } ... l: ... when != n // Besides the issue found by the semantic patch, this code also stores the device_node value in a list, which requires an of_node_get, and then cleans up the list on exit from the function, which requires an of_node_put. Signed-off-by: Julia Lawall Signed-off-by: Rob Herring

of/irq: Use the msi-map property to provide device-specific MSI domain

2015-10-16T12:07:15+00:00

While msi-parent is used to point to the MSI controller that works for all the devices behind a root complex, it doesn't allow configurations where each individual device can be routed to a separate MSI controller. The msi-map property provides this flexibility (and much more), so let's add a utility function that parses it, and return the corresponding MSI domain. Acked-by: Rob Herring Signed-off-by: Marc Zyngier

of/irq: Split of_msi_map_rid to reuse msi-map lookup

2015-10-16T12:07:15+00:00

The msi-map property is also used to identify the MSI controller as a form of grown-up msi-parent property. Looking it up is complicated enough, and since of_msi_map_rid already implements this, let's turn it into an internal utility function. We'll put that to good use later on. Acked-by: Rob Herring Signed-off-by: Marc Zyngier