BMC/Intel-BMC/linux.git/drivers/nvme, branch dev-4.17

nvmet-fc: fix target sgl list on large transfers

2018-08-03T05:48:03+00:00

commit d082dc1562a2ff0947b214796f12faaa87e816a9 upstream. The existing code to carve up the sg list expected an sg element-per-page which can be very incorrect with iommu's remapping multiple memory pages to fewer bus addresses. To hit this error required a large io payload (greater than 256k) and a system that maps on a per-page basis. It's possible that large ios could get by fine if the system condensed the sgl list into the first 64 elements. This patch corrects the sg list handling by specifically walking the sg list element by element and attempting to divide the transfer up on a per-sg element boundary. While doing so, it still tries to keep sequences under 256k, but will exceed that rule if a single sg element is larger than 256k. Fixes: 48fa362b6c3f ("nvmet-fc: simplify sg list handling") Cc: # 4.14 Signed-off-by: James Smart Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman

nvme: lightnvm: add granby support

2018-08-03T05:47:58+00:00

[ Upstream commit ea48e877994f086af481427bac110aa63686c3ce ] Add a new lightnvm quirk to identify CNEX’s Granby controller. Signed-off-by: Wei Xu Reviewed-by: Javier González Reviewed-by: Matias Bjørling Signed-off-by: Keith Busch Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

nvme-pci: Fix AER reset handling

2018-08-03T05:47:44+00:00

[ Upstream commit 72cd4cc28e234ed7189ee508ed65ab60c80a97c8 ] The nvme timeout handling doesn't do anything if the pci channel is offline, which is the case when recovering from PCI error event, so it was a bad idea to sync the controller reset in this state. This patch flushes the reset work in the error_resume callback instead when the channel is back to online. This keeps AER handling serialized and can recover from timeouts. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199757 Fixes: cc1d5e749a2e ("nvme/pci: Sync controller reset for AER slot_reset") Reported-by: Alex Gagniuc Tested-by: Alex Gagniuc Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

nvme-rdma: stop admin queue before freeing it

2018-08-03T05:47:44+00:00

[ Upstream commit 2e050f00a0f0e07467050cb4afae0234941e5bf3 ] For any failure after nvme_rdma_start_queue in nvme_rdma_configure_admin_queue, the admin queue will be freed with the NVME_RDMA_Q_LIVE flag still set. Once nvme_rdma_stop_queue is invoked, that will cause a use-after-free. BUG: KASAN: use-after-free in rdma_disconnect+0x1f/0xe0 [rdma_cm] To fix it, call nvme_rdma_stop_queue for all the failed cases after nvme_rdma_start_queue. Signed-off-by: Jianchao Wang Suggested-by: Sagi Grimberg Reviewed-by: Max Gurtovoy Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

nvme/pci: Sync controller reset for AER slot_reset

2018-06-25T23:51:28+00:00

commit cc1d5e749a2e1cf59fa940b976181e631d6985e1 upstream. AER handling expects a successful return from slot_reset means the driver made the device functional again. The nvme driver had been using an asynchronous reset to recover the device, so the device may still be initializing after control is returned to the AER handler. This creates problems for subsequent event handling, causing the initializion to fail. This patch fixes that by syncing the controller reset before returning to the AER driver, and reporting the true state of the reset. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199657 Reported-by: Alex Gagniuc Cc: Sinan Kaya Cc: Bjorn Helgaas Cc: stable@vger.kernel.org Tested-by: Alex Gagniuc Reviewed-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2018-06-02T16:55:44+00:00

Pull rdma fixes from Jason Gunthorpe: "Just three small last minute regressions that were found in the last week. The Broadcom fix is a bit big for rc7, but since it is fixing driver crash regressions that were merged via netdev into rc1, I am sending it. - bnxt netdev changes merged this cycle caused the bnxt RDMA driver to crash under certain situations - Arnd found (several, unfortunately) kconfig problems with the patches adding INFINIBAND_ADDR_TRANS. Reverting this last part, will fix it more fully outside -rc. - Subtle change in error code for a uapi function caused breakage in userspace. This was bug was subtly introduced cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/core: Fix error code for invalid GID entry IB: Revert "remove redundant INFINIBAND kconfig dependencies" RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes

Merge tag 'for-linus-20180530' of git://git.kernel.dk/linux-block

2018-05-30T21:37:59+00:00

Pull block fix from Jens Axboe: "Just a single fix that should make it into this release, fixing a regression with T10-DIF on NVMe" * tag 'for-linus-20180530' of git://git.kernel.dk/linux-block: nvme: fix extended data LBA supported setting

nvme: fix extended data LBA supported setting

2018-05-29T18:29:16+00:00

This value depands on the metadata support value, so reorder the initialization to fit. Fixes: b5be3b392 ("nvme: always unregister the integrity profile in __nvme_revalidate_disk") Signed-off-by: Max Gurtovoy Signed-off-by: Christoph Hellwig Cc: stable@vger.kernel.org

IB: Revert "remove redundant INFINIBAND kconfig dependencies"

2018-05-28T16:40:16+00:00

Several subsystems depend on INFINIBAND_ADDR_TRANS, which in turn depends on INFINIBAND. However, when with CONFIG_INIFIBAND=m, this leads to a link error when another driver using it is built-in. The INFINIBAND_ADDR_TRANS dependency is insufficient here as this is a 'bool' symbol that does not force anything to be a module in turn. fs/cifs/smbdirect.o: In function `smbd_disconnect_rdma_work': smbdirect.c:(.text+0x1e4): undefined reference to `rdma_disconnect' net/9p/trans_rdma.o: In function `rdma_request': trans_rdma.c:(.text+0x7bc): undefined reference to `rdma_disconnect' net/9p/trans_rdma.o: In function `rdma_destroy_trans': trans_rdma.c:(.text+0x830): undefined reference to `ib_destroy_qp' trans_rdma.c:(.text+0x858): undefined reference to `ib_dealloc_pd' Fixes: 9533b292a7ac ("IB: remove redundant INFINIBAND kconfig dependencies") Signed-off-by: Arnd Bergmann Acked-by: Greg Thelen Signed-off-by: Jason Gunthorpe

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2018-05-24T21:12:05+00:00

Pull rdma fixes from Jason Gunthorpe: "This is pretty much just the usual array of smallish driver bugs. - remove bouncing addresses from the MAINTAINERS file - kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and hns drivers - various small LOC behavioral/operational bugs in mlx5, hns, qedr and i40iw drivers - two fixes for patches already sent during the merge window - a long-standing bug related to not decreasing the pinned pages count in the right MM was found and fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits) RDMA/hns: Move the location for initializing tmp_len RDMA/hns: Bugfix for cq record db for kernel IB/uverbs: Fix uverbs_attr_get_obj RDMA/qedr: Fix doorbell bar mapping for dpi > 1 IB/umem: Use the correct mm during ib_umem_release iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()' RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint RDMA/i40iw: Avoid reference leaks when processing the AEQ RDMA/i40iw: Avoid panic when objects are being created and destroyed RDMA/hns: Fix the bug with NULL pointer RDMA/hns: Set NULL for __internal_mr RDMA/hns: Enable inner_pa_vld filed of mpt RDMA/hns: Set desc_dma_addr for zero when free cmq desc RDMA/hns: Fix the bug with rq sge RDMA/hns: Not support qp transition from reset to reset for hip06 RDMA/hns: Add return operation when configured global param fail RDMA/hns: Update convert function of endian format RDMA/hns: Load the RoCE dirver automatically RDMA/hns: Bugfix for rq record db for kernel RDMA/hns: Add rq inline flags judgement ...