BMC/Intel-BMC/linux.git/drivers/nvme/host/fc.c, branch dev-4.17

nvme: expand nvmf_check_if_ready checks

2018-04-12T15:58:27+00:00

The nvmf_check_if_ready() checks that were added are very simplistic. As such, the routine allows a lot of cases to fail ios during windows of reset or re-connection. In cases where there are not multi-path options present, the error goes back to the callee - the filesystem or application. Not good. The common routine was rewritten and calling syntax slightly expanded so that per-transport is_ready routines don't need to be present. The transports now call the routine directly. The routine is now a fabrics routine rather than an inline function. The routine now looks at controller state to decide the action to take. Some states mandate io failure. Others define the condition where a command can be accepted. When the decision is unclear, a generic queue-or-reject check is made to look for failfast or multipath ios and only fails the io if it is so marked. Otherwise, the io will be queued and wait for the controller state to resolve. Admin commands issued via ioctl share a live admin queue with commands from the transport for controller init. The ioctls could be intermixed with the initialization commands. It's possible for the ioctl cmd to be issued prior to the controller being enabled. To block this, the ioctl admin commands need to be distinguished from admin commands used for controller init. Added a USERCMD nvme_req(req)->rq_flags bit to reflect this division and set it on ioctls requests. As the nvmf_check_if_ready() routine is called prior to nvme_setup_cmd(), ensure that commands allocated by the ioctl path (actually anything in core.c) preps the nvme_req(req) before starting the io. This will preserve the USERCMD flag during execution and/or retry. Signed-off-by: James Smart Reviewed-by: Sagi Grimberg Reviewed-by: Johannes Thumshirn Signed-off-by: Keith Busch Signed-off-by: Jens Axboe

Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block

2018-04-05T21:27:02+00:00

Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...

nvme_fc: on remoteport reuse, set new nport_id and role.

2018-03-26T14:53:43+00:00

When reattaching to a removed remoteport that has not yet been fully deleted as it's waiting for reconnect timeouts, be sure to re-set the ports nport id and role. Signed-off-by: James Smart Signed-off-by: Keith Busch Signed-off-by: Jens Axboe

nvme_fc: fix abort race on teardown with lld reject

2018-03-26T14:53:43+00:00

Another abort race: An io request is started, becomes active, and is attempted to be started with the lldd. At the same time the controller is stopped/torndown and an itterator is run to abort the ios. As the io is active, it is added to the outstanding aborted io count. However on the original io request thread, the driver ends up rejecting the io due to the condition that induced the controller teardown. The driver reject path didn't check whether it was in the outstanding io count. This left the count outstanding stopping controller teardown. Correct by, in the driver reject case, setting the state to inactive and checking whether it was in the outstanding io count. Signed-off-by: James Smart Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch Signed-off-by: Jens Axboe

nvme_fc: io timeout should defer abort to ctrl reset

2018-03-26T14:53:43+00:00

The current nvme_fc code, when an io times out, will abort the io on the fc link, then call the error recovery routine to reset the controller. It is during the reset of the controller that the transport will wait for all ios to be aborted before sending a Disconnect LS to the target. However, the reset routine only waits for the io which it generates the abort for to complete. Any io that was aborted just prior to the reset isn't in it's list to wait for. Thus the Disconnect is getting sent before the aborts have completed. Correct by removing the abort in the timeout handler. The reset will generate the abort. At that point the timeout handler can be simplified to request the reset (via the error handler) and restart the timeout timer. Also fixes a small typo in a comment in the reset handler. Signed-off-by: James Smart Signed-off-by: Keith Busch Signed-off-by: Jens Axboe

nvme_fc: fix ctrl create failures racing with workq items

2018-03-26T14:53:43+00:00

If there are errors during initial controller create, the transport will teardown the partially initialized controller struct and free the ctlr memory. Trouble is - most of those errors can occur due to asynchronous events happening such io timeouts and subsystem connectivity failures. Those failures invoke async workq items to reset the controller and attempt reconnect. Those may be in progress as the main thread frees the ctrl memory, resulting in NULL ptr oops. Prevent this from happening by having the main ctrl failure thread changing state to DELETING followed by synchronously cancelling any pending queued work item. The change of state will prevent the scheduling of resets or reconnect events. Signed-off-by: James Smart Signed-off-by: Keith Busch Signed-off-by: Jens Axboe

nvme: centralize ctrl removal prints

2018-03-26T14:53:43+00:00

nvme_delete_ctrl can be called from various contexts in parallel, and cause duplicated information prints, even though the specific context doesn't perform the actual removal. Instead, print the information when the actual removal occurs. Signed-off-by: Max Gurtovoy Reviewed-by: Johannes Thumshirn Signed-off-by: Keith Busch Signed-off-by: Jens Axboe

nvme_fc: rework sqsize handling

2018-03-08T17:39:58+00:00

Corrected four outstanding issues in the transport around sqsize. 1: Create Connection LS is sending the 1's-based sqsize, should be sending the 0's-based value. 2: allocation of hw queue is using the 0's-base size. It should be using the 1's-based value. 3: normalization of ctrl.sqsize by MQES is using MQES+1 (1's-based value). It should be MQES (0's-based value). 4: Missing clause to ensure queue_count not larger than ctrl->sqsize. Corrected by: Clean up routines that pass queue size around. The queue size value is the actual count (1's-based) value and determined from ctrl->sqsize + 1. Routines that send 0's-based value adapt from queue size. Sset ctrl->sqsize properly for MQES. Added clause to nsure queue_count not larger than ctrl->sqsize + 1. Signed-off-by: James Smart Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch

nvme_fc: cleanup io completion

2018-02-11T08:45:43+00:00

There was some old cold that dealt with complete_rq being called prior to the lldd returning the io completion. This is garbage code. The complete_rq routine was being called after eh_timeouts were called and it was due to eh_timeouts not being handled properly. The timeouts were fixed in prior patches so that in general, a timeout will initiate an abort and the reset timer restarted as the abort operation will take care of completing things. Given the reset timer restarted, the erroneous complete_rq calls were eliminated. So remove the work that was synchronizing complete_rq with io completion. Reviewed-by: Johannes Thumshirn Signed-off-by: James Smart Signed-off-by: Sagi Grimberg

nvme_fc: correct abort race condition on resets

2018-02-11T08:45:34+00:00

During reset handling, there is live io completing while the reset is taking place. The reset path attempts to abort all outstanding io, counting the number of ios that were reset. It then waits for those ios to be reclaimed from the lldd before continuing. The transport's logic on io state and flag setting was poor, allowing ios to complete simultaneous to the abort request. The completed ios were counted, but as the completion had already occurred, the completion never reduced the count. As the count never zeros, the reset/delete never completes. Tighten it up by unconditionally changing the op state to completed when the io done handler is called. The reset/abort path now changes the op state to aborted, but the abort only continues if the op state was live priviously. If complete, the abort is backed out. Thus proper counting of io aborts and their completions is working again. Also removed the TERMIO state on the op as it's redundant with the op's aborted state. Reviewed-by: Johannes Thumshirn Signed-off-by: James Smart Signed-off-by: Sagi Grimberg