BMC/Intel-BMC/linux.git/drivers/nvdimm/dimm_devs.c, branch dev-5.2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295

2019-06-05T15:36:38+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

2019-05-07T16:18:12+00:00

Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()

treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively

2019-04-09T12:19:06+00:00

%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^$tools\|Documentation$/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus Acked-by: David Sterba (for btrfs) Acked-by: Mike Rapoport (for mm/memblock.c) Acked-by: Bjorn Helgaas (for drivers/pci) Acked-by: Rafael J. Wysocki Signed-off-by: Petr Mladek

Merge branch 'for-5.1/libnvdimm' into libnvdimm-for-next

2019-03-11T19:13:42+00:00

Merge miscellaneous libnvdimm sub-system updates for v5.1. Highlights include: * Support for the Hyper-V family of device-specific-methods (DSMs) * Several fixes and workarounds for Hyper-V compatibility. * Fix for the support to cache the dirty-shutdown-count at init.

libnvdimm/dimm: Add a no-BLK quirk based on NVDIMM family

2019-02-03T00:35:26+00:00

As Dexuan reports the NVDIMM_FAMILY_HYPERV platform is incompatible with the existing Linux namespace implementation because it uses NSLABEL_FLAG_LOCAL for x1-width PMEM interleave sets. Quirk it as an platform / DIMM that does not provide BLK-aperture access. Allow the libnvdimm core to assume no potential for aliasing. In case other implementations make the same mistake, provide a "noblk" module parameter to force-enable the quirk. Link: https://lkml.kernel.org/r/PU1P153MB0169977604493B82B662A01CBF920@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM Reported-by: Dexuan Cui Tested-by: Dexuan Cui Signed-off-by: Dan Williams

libnvdimm/security: Require nvdimm_security_setup_events() to succeed

2019-01-21T17:57:43+00:00

The following warning: ACPI0012:00: security event setup failed: -19 ...is meant to capture exceptional failures of sysfs_get_dirent(), however it will also fail in the common case when security support is disabled. A few issues: 1/ A dev_warn() report for a common case is too chatty 2/ The setup of this notifier is generic, no need for it to be driven from the nfit driver, it can exist completely in the core. 3/ If it fails for any reason besides security support being disabled, that's fatal and should abort DIMM activation. Userspace may hang if it never gets overwrite notifications. 4/ The dirent needs to be released. Move the call to the core 'dimm' driver, make it conditional on security support being active, make it fatal for the exceptional case, add the missing sysfs_put() at device disable time. Fixes: 7d988097c546 ("...Add security DSM overwrite support") Reviewed-by: Dave Jiang Signed-off-by: Dan Williams

tools/testing/nvdimm: Add test support for Intel nvdimm security DSMs

2018-12-21T20:44:41+00:00

Add nfit_test support for DSM functions "Get Security State", "Set Passphrase", "Disable Passphrase", "Unlock Unit", "Freeze Lock", and "Secure Erase" for the fake DIMMs. Also adding a sysfs knob in order to put the DIMMs in "locked" state. The order of testing DIMM unlocking would be. 1a. Disable DIMM X. 1b. Set Passphrase to DIMM X. 2. Write to /sys/devices/platform/nfit_test.0/nfit_test_dimm/test_dimmX/lock_dimm 3. Renable DIMM X 4. Check DIMM X state via sysfs "security" attribute for nmemX. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams

acpi/nfit, libnvdimm/security: add Intel DSM 1.8 master passphrase support

2018-12-21T20:44:41+00:00

With Intel DSM 1.8 [1] two new security DSMs are introduced. Enable/update master passphrase and master secure erase. The master passphrase allows a secure erase to be performed without the user passphrase that is set on the NVDIMM. The commands of master_update and master_erase are added to the sysfs knob in order to initiate the DSMs. They are similar in opeartion mechanism compare to update and erase. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf Signed-off-by: Dave Jiang Signed-off-by: Dan Williams

acpi/nfit, libnvdimm/security: Add security DSM overwrite support

2018-12-21T20:44:41+00:00

Add support for the NVDIMM_FAMILY_INTEL "ovewrite" capability as described by the Intel DSM spec v1.7. This will allow triggering of overwrite on Intel NVDIMMs. The overwrite operation can take tens of minutes. When the overwrite DSM is issued successfully, the NVDIMMs will be unaccessible. The kernel will do backoff polling to detect when the overwrite process is completed. According to the DSM spec v1.7, the 128G NVDIMMs can take up to 15mins to perform overwrite and larger DIMMs will take longer. Given that overwrite puts the DIMM in an indeterminate state until it completes introduce the NDD_SECURITY_OVERWRITE flag to prevent other operations from executing when overwrite is happening. The NDD_WORK_PENDING flag is added to denote that there is a device reference on the nvdimm device for an async workqueue thread context. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams

acpi/nfit, libnvdimm: Add support for issue secure erase DSM to Intel nvdimm

2018-12-21T20:44:41+00:00

Add support to issue a secure erase DSM to the Intel nvdimm. The required passphrase is acquired from an encrypted key in the kernel user keyring. To trigger the action, "erase " is written to the "security" sysfs attribute. Signed-off-by: Dave Jiang Signed-off-by: Dan Williams