BMC/Intel-BMC/linux.git/drivers/net/wireless/intel, branch v5.4.19

iwlwifi: don't throw error when trying to remove IGTK

2020-02-11T12:35:34+00:00

commit 197288d5ba8a5289f22d3aeb4fca3824bfd9b4af upstream. The IGTK keys are only removed by mac80211 after it has already removed the AP station. This causes the driver to throw an error because mac80211 is trying to remove the IGTK when the station doesn't exist anymore. The firmware is aware that the station has been removed and can deal with it the next time we try to add an IGTK for a station, so we shouldn't try to remove the key if the station ID is IWL_MVM_INVALID_STA. Do this by removing the check for mvm_sta before calling iwl_mvm_send_sta_igtk() and check return from that function gracefully if the station ID is invalid. Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

iwlwifi: dbg: force stop the debug monitor HW

2020-02-05T21:22:48+00:00

[ Upstream commit 990aba28f5001f6e90fdd84e13612b560a75deda ] The driver is required to stop the debug monitor HW recording regardless of the debug configuration since the driver is responsible to halt the FW DBGC. Signed-off-by: Shahar S Matityahu Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin

iwlwifi: Don't ignore the cap field upon mcc update

2020-02-05T21:22:48+00:00

[ Upstream commit 2763bba6328c53c455d8f7f5302b80030551c31b ] When receiving a new MCC driver get all the data about the new country code and its regulatory information. Mistakenly, we ignored the cap field, which includes global regulatory information which should be applies to every channel. Fix it. Signed-off-by: Haim Dreyfuss Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin

iwlwifi: pcie: allocate smaller dev_cmd for TX headers

2020-02-05T21:22:47+00:00

[ Upstream commit a89c72ffd07369f5ccc74f0332d2785a7077241d ] As noted in the previous commit, due to the way we allocate the dev_cmd headers with 324 byte size, and 4/8 byte alignment, the part we use of them (bytes 20..40-68) could still cross a page and thus 2^32 boundary. Address this by using alignment to ensure that the allocation cannot cross a page boundary, on hardware that's affected. To make that not cause more memory consumption, reduce the size of the allocations to the necessary size - we go from 324 bytes in each allocation to 60/68 on gen2 depending on family, and ~120 or so on gen1 (so on gen1 it's a pure reduction in size, since we don't need alignment there). To avoid size and clearing issues, add a new structure that's just the header, and use kmem_cache_zalloc(). Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin

iwlwifi: mvm: fix potential SKB leak on TXQ TX

2020-01-29T15:45:30+00:00

commit df2378ab0f2a9dd4cf4501268af1902cc4ebacd8 upstream. When we transmit after TXQ dequeue, we aren't paying attention to the return value of the transmit functions, leading to a potential SKB leak. Refactor the code a bit (and rename ..._tx to ..._tx_sta) to check for this happening. Signed-off-by: Johannes Berg Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model") Signed-off-by: Luca Coelho Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix SKB leak on invalid queue

2020-01-29T15:45:30+00:00

commit b9f726c94224e863d4d3458dfec2e7e1284a39ce upstream. It used to be the case that if we got here, we wouldn't warn but instead allocate the queue (DQA). With using the mac80211 TXQs model this changed, and we really have nothing to do with the frame here anymore, hence the warning now. However, clearly we missed in coding & review that this is now a pure error path and leaks the SKB if we return 0 instead of an indication that the SKB needs to be freed. Fix this. Signed-off-by: Johannes Berg Fixes: cfbc6c4c5b91 ("iwlwifi: mvm: support mac80211 TXQs model") Signed-off-by: Luca Coelho Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: don't send the IWL_MVM_RXQ_NSSN_SYNC notif to Rx queues

2020-01-29T15:45:26+00:00

commit d829229e35f302fd49c052b5c5906c90ecf9911d upstream. The purpose of this was to keep all the queues updated with the Rx sequence numbers because unlikely yet possible situations where queues can't understand if a specific packet needs to be dropped or not. Unfortunately, it was reported that this caused issues in our DMA engine. We don't fully understand how this is related, but this is being currently debugged. For now, just don't send this notification to the Rx queues. This de-facto reverts my commit 3c514bf831ac12356b695ff054bef641b9e99593: iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues This issue was reported here: https://bugzilla.kernel.org/show_bug.cgi?id=204873 https://bugzilla.kernel.org/show_bug.cgi?id=205001 and others maybe. Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues") CC: # 5.3+ Signed-off-by: Emmanuel Grumbach Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

Revert "iwlwifi: mvm: fix scan config command size"

2020-01-29T15:45:26+00:00

commit 205608749e1ef394f513888091e613c5bfccbcca upstream. Since v5.4-rc1 was released, iwlwifi started throwing errors when scan commands were sent to the firmware with certain devices (depending on the OTP burned in the device, which contains the list of available channels). For instance: iwlwifi 0000:00:14.3: FW error in SYNC CMD SCAN_CFG_CMD This bug was reported in the ArchLinux bug tracker: https://bugs.archlinux.org/task/64703 And also in a specific case in bugzilla, when the lar_disabled option was set: https://bugzilla.kernel.org/show_bug.cgi?id=205193 Revert the commit that introduced this error, by using the number of channels from the OTP instead of the number of channels that is specified in the FW TLV that tells us how many channels it supports. This reverts commit 06eb547c4ae4382e70d556ba213d13c95ca1801b. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Mehmet Akif Tasova [ Luca: reworded the commit message a bit. ] Signed-off-by: Luca Coelho Signed-off-by: Greg Kroah-Hartman

net: Fix packet reordering caused by GRO and listified RX cooperation

2020-01-29T15:45:22+00:00

[ Upstream commit c80794323e82ac6ab45052ebba5757ce47b4b588 ] Commit 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs") introduces batching of GRO_NORMAL packets in napi_frags_finish, and commit 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") adds the same to napi_skb_finish. However, dev_gro_receive (that is called just before napi_{frags,skb}_finish) can also pass skbs to the networking stack: e.g., when the GRO session is flushed, napi_gro_complete is called, which passes pp directly to netif_receive_skb_internal, skipping napi->rx_list. It means that the packet stored in pp will be handled by the stack earlier than the packets that arrived before, but are still waiting in napi->rx_list. It leads to TCP reorderings that can be observed in the TCPOFOQueue counter in netstat. This commit fixes the reordering issue by making napi_gro_complete also use napi->rx_list, so that all packets going through GRO will keep their order. In order to keep napi_gro_flush working properly, gro_normal_list calls are moved after the flush to clear napi->rx_list. iwlwifi calls napi_gro_flush directly and does the same thing that is done by gro_normal_list, so the same change is applied there: napi_gro_flush is moved to be before the flush of napi->rx_list. A few other drivers also use napi_gro_flush (brocade/bna/bnad.c, cortina/gemini.c, hisilicon/hns3/hns3_enet.c). The first two also use napi_complete_done afterwards, which performs the gro_normal_list flush, so they are fine. The latter calls napi_gro_receive right after napi_gro_flush, so it can end up with non-empty napi->rx_list anyway. Fixes: 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs") Signed-off-by: Maxim Mikityanskiy Cc: Alexander Lobakin Cc: Edward Cree Acked-by: Alexander Lobakin Acked-by: Saeed Mahameed Acked-by: Edward Cree Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix support for single antenna diversity

2020-01-17T18:49:02+00:00

commit bb99ff9baa02beb9216c86678999342197c849cc upstream. When the single antenna diversity support was sent upstream, only some definitions were sent, due to a bad revert. Fix this by adding the actual code. Fixes: 5952e0ec3f05 ("iwlwifi: mvm: add support for single antenna diversity") Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman