BMC/Intel-BMC/linux.git/drivers/net/usb/cdc_ncm.c, branch dev-5.14-intel

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-06-19T02:47:02+00:00

Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski

net: cdc_ncm: switch to eth%d interface naming

2021-06-15T18:24:57+00:00

This is meant to make the host side cdc_ncm interface consistently named just like the older CDC protocols: cdc_ether & cdc_ecm (and even rndis_host), which all use 'FLAG_ETHER | FLAG_POINTTOPOINT'. include/linux/usb/usbnet.h: #define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */ #define FLAG_WLAN 0x0080 /* use "wlan%d" names */ #define FLAG_WWAN 0x0400 /* use "wwan%d" names */ #define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */ drivers/net/usb/usbnet.c @ line 1711: strcpy (net->name, "usb%d"); ... // heuristic: "usb%d" for links we know are two-host, // else "eth%d" when there's reasonable doubt. userspace // can rename the link if it knows better. if ((dev->driver_info->flags & FLAG_ETHER) != 0 && ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 || (net->dev_addr [0] & 0x02) == 0)) strcpy (net->name, "eth%d"); /* WLAN devices should always be named "wlan%d" */ if ((dev->driver_info->flags & FLAG_WLAN) != 0) strcpy(net->name, "wlan%d"); /* WWAN devices should always be named "wwan%d" */ if ((dev->driver_info->flags & FLAG_WWAN) != 0) strcpy(net->name, "wwan%d"); So by using ETHER | POINTTOPOINT the interface naming is either usb%d or eth%d based on the global uniqueness of the mac address of the device. Without this 2.5gbps ethernet dongles which all seem to use the cdc_ncm driver end up being called usb%d instead of eth%d even though they're definitely not two-host. (All 1gbps & 5gbps ethernet usb dongles I've tested don't hit this problem due to use of different drivers, primarily r8152 and aqc111) Fixes tag is based purely on git blame, and is really just here to make sure this hits LTS branches newer than v4.5. Cc: Lorenzo Colitti Fixes: 4d06dd537f95 ("cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind") Signed-off-by: Maciej Żenczykowski Signed-off-by: David S. Miller

net: usb: Fix spelling mistakes

2021-06-02T00:05:05+00:00

wierdness ==> weirdness multicat ==> multicast limite ==> limit adddress ==> address operater ==> operator intial ==> initial smaler ==> smaller Communcation ==> Communication funcitons ==> functions everytime ==> every time Neigbor ==> Neighbor performace ==> performance Signed-off-by: Zheng Yongjun Signed-off-by: David S. Miller

net: cdc_ncm: use DEVICE_ATTR_RW macro

2021-05-20T22:50:54+00:00

Use DEVICE_ATTR_RW helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing Signed-off-by: David S. Miller

net: cdc_ncm: record speed in status method

2021-04-06T23:22:36+00:00

Until very recently, the usbnet framework only had support functions for devices which reported the link speed by explicitly querying the PHY over a MDIO interface. However, the cdc_ncm devices send notifications when the link state or link speeds change and do not expose the PHY (or modem) directly. Support funtions (e.g. usbnet_get_link_ksettings_internal()) to directly query state recorded by the cdc_ncm driver were added in a previous patch. So instead of cdc_ncm spewing the link speed into the dmesg buffer, record the link speed encoded in these notifications and tell the usbnet framework to use the new functions to get link speed/state. Link speed/state is now available via ethtool. This is especially useful given all current RTL8156 devices emit a connection/speed status notification every 32ms and this would fill the dmesg buffer. This implementation replaces the one recently submitted in de658a195ee23ca6aaffe197d1d2ea040beea0a2 : "net: usb: cdc_ncm: don't spew notifications" v2: rebased on upstream v3: changed variable names v4: rewrote commit message Signed-off-by: Oliver Neukum Tested-by: Roland Dreier Signed-off-by: Grant Grundler Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

usbnet: add _mii suffix to usbnet_set/get_link_ksettings

2021-04-06T23:22:36+00:00

The generic functions assumed devices provided an MDIO interface (accessed via older mii code, not phylib). This is true only for genuine ethernet. Devices with a higher level of abstraction or based on different technologies do not have MDIO. To support this case, first rename the existing functions with _mii suffix. v2: rebased on changed upstream v3: changed names to clearly say that this does NOT use phylib v4: moved hunks to correct patch; reworded commmit messages Signed-off-by : Oliver Neukum Tested-by: Roland Dreier Reviewed-by: Grant Grundler Tested-by: Grant Grundler Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: cdc_ncm: drop redundant driver-data assignment

2021-03-19T02:13:42+00:00

The driver data for the data interface has already been set by usb_driver_claim_interface() so drop the subsequent redundant assignment. Note that this also avoids setting the driver data three times in case of a combined interface. Signed-off-by: Johan Hovold Signed-off-by: David S. Miller

net: usb: cdc_ncm: emit dev_err on error paths

2021-03-08T19:54:05+00:00

Several error paths in bind/probe code will only emit output using dev_dbg. But if we are going to fail the bind/probe, emit related output with "err" priority. Signed-off-by: Grant Grundler Signed-off-by: David S. Miller

net: usb: cdc_ncm: use new API for bh tasklet

2021-02-03T22:22:21+00:00

This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") It is unfortunate that we need to add a pointer to the driver context to get back to the usbnet device, but the space will be reclaimed once there are no more users of the old API left and we can remove the data value and flag from the tasklet struct. Signed-off-by: Emil Renner Berthing Link: https://lore.kernel.org/r/20210130234637.26505-1-kernel@esmil.dk Signed-off-by: Jakub Kicinski

net: usb: cdc_ncm: don't spew notifications

2021-01-20T17:01:55+00:00

RTL8156 sends notifications about every 32ms. Only display/log notifications when something changes. This issue has been reported by others: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472 https://lkml.org/lkml/2020/8/27/1083 ... [785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd [785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN [785962.929954] usb 1-1: Manufacturer: Realtek [785962.929956] usb 1-1: SerialNumber: 000000001 [785962.991755] usbcore: registered new interface driver cdc_ether [785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15 [785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384 [785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384 [785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15 [785963.019211] usbcore: registered new interface driver cdc_ncm [785963.023856] usbcore: registered new interface driver cdc_wdm [785963.025461] usbcore: registered new interface driver cdc_mbim [785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0 [785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected ... This is about 2KB per second and will overwrite all contents of a 1MB dmesg buffer in under 10 minutes rendering them useless for debugging many kernel problems. This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering the majority of those logs useless too. When the link is up (expected state), spew amount is >2x higher: ... [786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink ... Chrome OS cannot support RTL8156 until this is fixed. Signed-off-by: Grant Grundler Reviewed-by: Hayes Wang Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org Signed-off-by: Jakub Kicinski