BMC/Intel-BMC/linux.git/drivers/net/ethernet/intel, branch dev-5.2

ixgbe: fix possible deadlock in ixgbe_service_task()

2019-09-10T09:35:13+00:00

[ Upstream commit 8b6381600d59871fbe44d36522272f961ab42410 ] ixgbe_service_task() calls unregister_netdev() under rtnl_lock(). But unregister_netdev() internally calls rtnl_lock(). So deadlock would occur. Fixes: 59dd45d550c5 ("ixgbe: firmware recovery mode") Signed-off-by: Taehee Yoo Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

iavf: fix dereference of null rx_buffer pointer

2019-07-26T07:10:47+00:00

[ Upstream commit 9fe06a51287b2d41baef7ece94df34b5abf19b90 ] A recent commit efa14c3985828d ("iavf: allow null RX descriptors") added a null pointer sanity check on rx_buffer, however, rx_buffer is being dereferenced before that check, which implies a null pointer dereference bug can potentially occur. Fix this by only dereferencing rx_buffer until after the null pointer check. Addresses-Coverity: ("Dereference before null check") Signed-off-by: Colin Ian King Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

ixgbe: Avoid NULL pointer dereference with VF on non-IPsec hw

2019-07-26T07:10:41+00:00

[ Upstream commit 92924064106e410cdc015f1dbfc0499309f9f5b1 ] An ipsec structure will not be allocated if the hardware does not support offload. Fixes the following Oops: [ 191.045452] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 191.054232] Mem abort info: [ 191.057014] ESR = 0x96000004 [ 191.060057] Exception class = DABT (current EL), IL = 32 bits [ 191.065963] SET = 0, FnV = 0 [ 191.069004] EA = 0, S1PTW = 0 [ 191.072132] Data abort info: [ 191.074999] ISV = 0, ISS = 0x00000004 [ 191.078822] CM = 0, WnR = 0 [ 191.081780] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000043d9e467 [ 191.088382] [0000000000000000] pgd=0000000000000000 [ 191.093252] Internal error: Oops: 96000004 [#1] SMP [ 191.098119] Modules linked in: vhost_net vhost tap vfio_pci vfio_virqfd vfio_iommu_type1 vfio xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter devlink ebtables ip6table_filter ip6_tables iptable_filter bpfilter ipmi_ssif nls_iso8859_1 input_leds joydev ipmi_si hns_roce_hw_v2 ipmi_devintf hns_roce ipmi_msghandler cppc_cpufreq sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 ses enclosure btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor hid_generic usbhid hid raid6_pq libcrc32c raid1 raid0 multipath linear ixgbevf hibmc_drm ttm [ 191.168607] drm_kms_helper aes_ce_blk aes_ce_cipher syscopyarea crct10dif_ce sysfillrect ghash_ce qla2xxx sysimgblt sha2_ce sha256_arm64 hisi_sas_v3_hw fb_sys_fops sha1_ce uas nvme_fc mpt3sas ixgbe drm hisi_sas_main nvme_fabrics usb_storage hclge scsi_transport_fc ahci libsas hnae3 raid_class libahci xfrm_algo scsi_transport_sas mdio aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [ 191.202952] CPU: 94 PID: 0 Comm: swapper/94 Not tainted 4.19.0-rc1+ #11 [ 191.209553] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.20.01 04/26/2019 [ 191.218064] pstate: 20400089 (nzCv daIf +PAN -UAO) [ 191.222873] pc : ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe] [ 191.228093] lr : ixgbe_msg_task+0x2d0/0x1088 [ixgbe] [ 191.233044] sp : ffff000009b3bcd0 [ 191.236346] x29: ffff000009b3bcd0 x28: 0000000000000000 [ 191.241647] x27: ffff000009628000 x26: 0000000000000000 [ 191.246946] x25: ffff803f652d7600 x24: 0000000000000004 [ 191.252246] x23: ffff803f6a718900 x22: 0000000000000000 [ 191.257546] x21: 0000000000000000 x20: 0000000000000000 [ 191.262845] x19: 0000000000000000 x18: 0000000000000000 [ 191.268144] x17: 0000000000000000 x16: 0000000000000000 [ 191.273443] x15: 0000000000000000 x14: 0000000100000026 [ 191.278742] x13: 0000000100000025 x12: ffff8a5f7fbe0df0 [ 191.284042] x11: 000000010000000b x10: 0000000000000040 [ 191.289341] x9 : 0000000000001100 x8 : ffff803f6a824fd8 [ 191.294640] x7 : ffff803f6a825098 x6 : 0000000000000001 [ 191.299939] x5 : ffff000000f0ffc0 x4 : 0000000000000000 [ 191.305238] x3 : ffff000028c00000 x2 : ffff803f652d7600 [ 191.310538] x1 : 0000000000000000 x0 : ffff000000f205f0 [ 191.315838] Process swapper/94 (pid: 0, stack limit = 0x00000000addfed5a) [ 191.322613] Call trace: [ 191.325055] ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe] [ 191.329927] ixgbe_msg_task+0x2d0/0x1088 [ixgbe] [ 191.334536] ixgbe_msix_other+0x274/0x330 [ixgbe] [ 191.339233] __handle_irq_event_percpu+0x78/0x270 [ 191.343924] handle_irq_event_percpu+0x40/0x98 [ 191.348355] handle_irq_event+0x50/0xa8 [ 191.352180] handle_fasteoi_irq+0xbc/0x148 [ 191.356263] generic_handle_irq+0x34/0x50 [ 191.360259] __handle_domain_irq+0x68/0xc0 [ 191.364343] gic_handle_irq+0x84/0x180 [ 191.368079] el1_irq+0xe8/0x180 [ 191.371208] arch_cpu_idle+0x30/0x1a8 [ 191.374860] do_idle+0x1dc/0x2a0 [ 191.378077] cpu_startup_entry+0x2c/0x30 [ 191.381988] secondary_start_kernel+0x150/0x1e0 [ 191.386506] Code: 6b15003f 54000320 f1404a9f 54000060 (79400260) Fixes: eda0333ac2930 ("ixgbe: add VF IPsec management") Signed-off-by: Dann Frazier Acked-by: Shannon Nelson Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

igb: clear out skb->tstamp after reading the txtime

2019-07-26T07:10:40+00:00

[ Upstream commit 1e08511d5d01884a3c9070afd52a47799312074a ] If a packet which is utilizing the launchtime feature (via SO_TXTIME socket option) also requests the hardware transmit timestamp, the hardware timestamp is not delivered to the userspace. This is because the value in skb->tstamp is mistaken as the software timestamp. Applications, like ptp4l, request a hardware timestamp by setting the SOF_TIMESTAMPING_TX_HARDWARE socket option. Whenever a new timestamp is detected by the driver (this work is done in igb_ptp_tx_work() which calls igb_ptp_tx_hwtstamps() in igb_ptp.c[1]), it will queue the timestamp in the ERR_QUEUE for the userspace to read. When the userspace is ready, it will issue a recvmsg() call to collect this timestamp. The problem is in this recvmsg() call. If the skb->tstamp is not cleared out, it will be interpreted as a software timestamp and the hardware tx timestamp will not be successfully sent to the userspace. Look at skb_is_swtx_tstamp() and the callee function __sock_recv_timestamp() in net/socket.c for more details. Signed-off-by: Vedang Patel Tested-by: Aaron Brown Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ixgbe: Check DDM existence in transceiver before access

2019-07-26T07:10:38+00:00

[ Upstream commit 655c91414579d7bb115a4f7898ee726fc18e0984 ] Some transceivers may comply with SFF-8472 but not implement the Digital Diagnostic Monitoring (DDM) interface described in it. The existence of such area is specified by bit 6 of byte 92, set to 1 if implemented. Currently, due to not checking this bit ixgbe fails trying to read SFP module's eeprom with the follow message: ethtool -m enP51p1s0f0 Cannot get Module EEPROM data: Input/output error Because it fails to read the additional 256 bytes in which it was assumed to exist the DDM data. This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom data was confirmed by Mellanox as correct and present in other Passive DACs in from other manufacturers. Signed-off-by: "Mauro S. M. Rodrigues" Reviewed-by: Jesse Brandeburg Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

iavf: allow null RX descriptors

2019-07-26T07:10:29+00:00

[ Upstream commit efa14c3985828da3163f5372137cb64d992b0f79 ] In some circumstances, the hardware can hand us a null receive descriptor, with no data attached but otherwise valid. Unfortunately, the driver was ill-equipped to handle such an event, and would stop processing packets at that point. To fix this, use the Descriptor Done bit instead of the size to determine whether or not a descriptor is ready to be processed. Add some checks to allow for unused buffers. Signed-off-by: Mitch Williams Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

ice: Check all VFs for MDD activity, don't disable

2019-07-26T07:10:18+00:00

[ Upstream commit 23c0112246b454e408fb0579b3f9089353d4d327 ] Don't use the mdd_detected variable as an exit condition for this loop; the first VF to NOT have an MDD event will cause the loop to terminate. Instead just look at all of the VFs, but don't disable them. This prevents proper release of resources if the VFs are rebooted or the VF driver reloaded. Instead, just log a message and call out repeat offenders. To make it clear what we are doing, use a differently-named variable in the loop. Signed-off-by: Mitch Williams Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

ice: Fix couple of issues in ice_vsi_release

2019-07-26T07:10:15+00:00

[ Upstream commit aa6ccf3f2d7042f94c4e91538956ce7051e7856e ] Currently the driver is calling ice_napi_del() and then unregister_netdev(). The call to unregister_netdev() will result in a call to ice_stop() and then ice_vsi_close(). This is where we call napi_disable() for all the MSI-X vectors. This flow is reversed so make the changes to ensure napi_disable() happens prior to napi_del(). Before calling napi_del() and free_netdev() make sure unregister_netdev() was called. This is done by making sure the __ICE_DOWN bit is set in the vsi->state for the interested VSI. Signed-off-by: Brett Creeley Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

ice: Gracefully handle reset failure in ice_alloc_vfs()

2019-07-26T07:10:14+00:00

[ Upstream commit 72f9c2039859e6303550f202d6cc6b8d8af0178c ] Currently if ice_reset_all_vfs() fails in ice_alloc_vfs() we fail to free some resources, reset variables, and return an error value. Fix this by adding another unroll case to free the pf->vf array, set the pf->num_alloc_vfs to 0, and return an error code. Without this, if ice_reset_all_vfs() fails in ice_alloc_vfs() we will not be able to do SRIOV without hard rebooting the system because rmmod'ing the driver does not work. Signed-off-by: Brett Creeley Signed-off-by: Anirudh Venkataramanan Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Sasha Levin

e1000e: start network tx queue only when link is up

2019-07-21T07:00:37+00:00

commit d17ba0f616a08f597d9348c372d89b8c0405ccf3 upstream. Driver does not want to keep packets in Tx queue when link is lost. But present code only reset NIC to flush them, but does not prevent queuing new packets. Moreover reset sequence itself could generate new packets via netconsole and NIC falls into endless reset loop. This patch wakes Tx queue only when NIC is ready to send packets. This is proper fix for problem addressed by commit 0f9e980bf5ee ("e1000e: fix cyclic resets at link up with active tx"). Signed-off-by: Konstantin Khlebnikov Suggested-by: Alexander Duyck Tested-by: Joseph Yasi Tested-by: Aaron Brown Tested-by: Oleksandr Natalenko Signed-off-by: Jeff Kirsher Signed-off-by: Greg Kroah-Hartman