BMC/Intel-BMC/linux.git/drivers/net/dsa/b53, branch dev-5.4

net: dsa: b53: b53_arl_rw_op() needs to select IVL or SVL

2020-04-29T14:33:11+00:00

[ Upstream commit 64fec9493f7dc9bdd7233bcfe98985c45bd0e3c1 ] Flip the IVL_SVL_SELECT bit correctly based on the VLAN enable status, the default is to perform Shared VLAN learning instead of Individual learning. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: Rework ARL bin logic

2020-04-29T14:33:10+00:00

[ Upstream commit 6344dbde6a27d10d16246d734b968f84887841e2 ] When asking the ARL to read a MAC address, we will get a number of bins returned in a single read. Out of those bins, there can essentially be 3 states: - all bins are full, we have no space left, and we can either replace an existing address or return that full condition - the MAC address was found, then we need to return its bin index and modify that one, and only that one - the MAC address was not found and we have a least one bin free, we use that bin index location then The code would unfortunately fail on all counts. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: Fix ARL register definitions

2020-04-29T14:33:10+00:00

[ Upstream commit c2e77a18a7ed65eb48f6e389b6a59a0fd753646a ] The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes, which means that when we read/wrote from/to ARL bin index 0, we were actually accessing the ARLA_RWCTRL register. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: Fix valid setting for MDB entries

2020-04-29T14:33:10+00:00

[ Upstream commit eab167f4851a19c514469dfa81147f77e17b5b20 ] When support for the MDB entries was added, the valid bit was correctly changed to be assigned depending on the remaining port bitmask, that is, if there were no more ports added to the entry's port bitmask, the entry now becomes invalid. There was another assignment a few lines below that would override this which would invalidate entries even when there were still multiple ports left in the MDB entry. Fixes: 5d65b64a3d97 ("net: dsa: b53: Add support for MDB") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: Lookup VID in ARL searches when VLAN is enabled

2020-04-29T14:33:10+00:00

[ Upstream commit 2e97b0cd1651a270f3a3fcf42115c51f3284c049 ] When VLAN is enabled, and an ARL search is issued, we also need to compare the full {MAC,VID} tuple before returning a successful search result. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: Ensure the default VID is untagged

2020-03-05T15:43:31+00:00

[ Upstream commit d965a5432d4c3e6b9c3d2bc1d4a800013bbf76f6 ] We need to ensure that the default VID is untagged otherwise the switch will be sending tagged frames and the results can be problematic. This is especially true with b53 switches that use VID 0 as their default VLAN since VID 0 has a special meaning. Fixes: fea83353177a ("net: dsa: b53: Fix default VLAN ID") Fixes: 061f6a505ac3 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: Always use dev->vlan_enabled in b53_configure_vlan()

2020-02-11T12:35:48+00:00

[ Upstream commit df373702bc0f8f2d83980ea441e71639fc1efcf8 ] b53_configure_vlan() is called by the bcm_sf2 driver upon setup and indirectly through resume as well. During the initial setup, we are guaranteed that dev->vlan_enabled is false, so there is no change in behavior, however during suspend, we may have enabled VLANs before, so we do want to restore that setting. Fixes: dad8d7c6452b ("net: dsa: b53: Properly account for VLAN filtering") Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: Fix egress flooding settings

2019-12-31T15:41:48+00:00

[ Upstream commit 63cc54a6f0736a432b04308a74677ab0ba8a58ee ] There were several issues with 53568438e381 ("net: dsa: b53: Add support for port_egress_floods callback") that resulted in breaking connectivity for standalone ports: - both user and CPU ports must allow unicast and multicast forwarding by default otherwise this just flat out breaks connectivity for standalone DSA ports - IP multicast is treated similarly as multicast, but has separate control registers - the UC, MC and IPMC lookup failure register offsets were wrong, and instead used bit values that are meaningful for the B53_IP_MULTICAST_CTRL register Fixes: 53568438e381 ("net: dsa: b53: Add support for port_egress_floods callback") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: Do not clear existing mirrored port mask

2019-10-06T13:55:14+00:00

Clearing the existing bitmask of mirrored ports essentially prevents us from capturing more than one port at any given time. This is clearly wrong, do not clear the bitmask prior to setting up the new port. Reported-by: Hubert Feurstein Fixes: ed3af5fd08eb ("net: dsa: b53: Add support for port mirroring") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: b53: Use the correct style for SPDX License Identifier

2019-09-22T22:24:51+00:00

This patch corrects the SPDX License Identifier style in header file for Broadcom BCM53xx managed switch driver. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Reviewed-by: Vivien Didelot Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski