BMC/Intel-BMC/linux.git/drivers/net/dsa/b53/b53_priv.h, branch dev-4.18

net: dsa: b53: Fix for brcm tag issue in Cygnus SoC

2018-06-06T17:47:16+00:00

In the Broadcom Cygnus SoC, the brcm tag needs to be inserted in between the mac address and the ether type (should use 'DSA_PROTO_TAG_BRCM') for the packets sent to the internal b53 switch. Since the Cygnus was added with the BCM58XX device id and the BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is broken, due to the incorrect brcm tag location. Add a new b53 device id (BCM583XX) for Cygnus family to fix the issue. Add the new device id to the BCM58XX family as Cygnus is similar to the BCM58XX in most other functionalities. Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags") Signed-off-by: Arun Parameswaran Acked-by: Scott Branden Reported-by: Clément Péron Reviewed-by: Florian Fainelli Tested-by: Clément Péron Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2018-06-03T13:31:58+00:00

Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller

net: dsa: b53: Add BCM5389 support

2018-06-01T15:15:42+00:00

This patch adds support for the BCM5389 switch connected through MDIO. Signed-off-by: Damien Thébault Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Add support for reading PHY statistics

2018-04-27T15:53:03+00:00

Allow the b53 driver to return PHY statistics when the CPU port used is different than 5, 7 or 8, because those are typically PHY-less on most devices. This is useful for debugging link problems between the switch and an external host when using a non standard CPU port number (e.g: 4). Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: Pass stringset to ethtool operations

2018-04-27T15:53:03+00:00

Up until now we largely assumed that we were interested in ETH_SS_STATS type of strings for all ethtool operations, this is about to change with the introduction of additional string sets, e.g: ETH_SS_PHY_STATS. Update all functions to take an appropriate stringset argument and act on it when it is different than ETH_SS_STATS for now. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

dsa: Pass the port to get_sset_count()

2018-03-04T18:34:18+00:00

By passing the port, we allow different ports to have different statistics. This is useful since some ports have SERDES interfaces with their own statistic counters. Signed-off-by: Andrew Lunn Tested-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: remove trans argument from vlan ops

2017-12-03T02:18:55+00:00

The DSA switch VLAN ops pass the switchdev_trans structure down to the drivers, but no one is using them and they aren't supposed to anyway. Remove the trans argument from VLAN prepare and add operations. At the same time, fix the following checkpatch warning: WARNING: line over 80 characters #74: FILE: drivers/net/dsa/dsa_loop.c:177: + const struct switchdev_obj_port_vlan *vlan) Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: bcm_sf2: Utilize b53_get_tag_protocol()

2017-11-30T18:00:04+00:00

Utilize the much more capable b53_get_tag_protocol() which takes care of all Broadcom switches specifics to resolve which port can have Broadcom tags enabled or not. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Export b53_configure_vlan()

2017-10-29T03:13:30+00:00

bcm_sf2 and b53 replicate the same operations: clear all VLANs and set their ports to the default VLAN tag (1 for these devices) so export the b53 function doing just that. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: bcm_sf2: Utilize b53_{enable, disable}_port

2017-09-19T23:08:54+00:00

Export b53_{enable,disable}_port and use these two functions in bcm_sf2_port_setup and bcm_sf2_port_disable. The generic functions cannot be used without wrapping because we need to manage additional switch integration details (PHY, Broadcom tag etc.). Reviewed-by: Vivien Didelot Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller