Intel OpenBMC Linux kernel source tree (mirror) https://git.radix-linux.su/BMC/Intel-BMC/linux.git/atom?h=dev-5.10-intel 2021-10-01T18:40:21+00:00 2021-10-01T18:40:21+00:00 Jae Hyun Yoo jae.hyun.yoo@linux.intel.com 2021-10-01T18:38:40+00:00 urn:sha1:9c881021a269af242594e2dfc79f1c4701404887 Pull 5.10.67 stable from OpenBMC upstream. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> 2021-09-16T03:29:35+00:00 Joel Stanley joel@jms.id.au 2021-09-16T03:29:35+00:00 urn:sha1:c283faf1e8932fd6086ebb8b4d269f5329592fea This is the 5.10.65 stable release 2021-09-03T08:09:28+00:00 Frieder Schrempf frieder.schrempf@kontron.de 2021-08-30T13:02:10+00:00 urn:sha1:ded6da217ced636f757051baa98a2564d7ec8100 The new generic NAND ECC framework stores the configuration and requirements in separate places since commit 93ef92f6f422 ("mtd: nand: Use the new generic ECC object"). In 5.10.x The SPI NAND layer still uses only the requirements to track the ECC properties. This mismatch leads to values of zero being used for ECC strength and step_size in the SPI NAND layer wherever nanddev_get_ecc_conf() is used and therefore breaks the SPI NAND on-die ECC support in 5.10.x. By using nanddev_get_ecc_requirements() instead of nanddev_get_ecc_conf() for SPI NAND, we make sure that the correct parameters for the detected chip are used. In later versions (5.11.x) this is fixed anyway with the implementation of the SPI NAND on-die ECC engine. Cc: stable@vger.kernel.org # 5.10.x Reported-by: voice INTER connect GmbH <developer@voiceinterconnect.de> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-08-26T12:35:33+00:00 Andreas Persson andreasp56@outlook.com 2021-07-12T07:54:52+00:00 urn:sha1:779a0f4347a474cf4b503350f3eef682404b6779 commit 2394e628738933aa014093d93093030f6232946d upstream. Erasing an AMD linear flash card (AM29F016D) crashes after the first sector has been erased. Likewise, writing to it crashes after two bytes have been written. The reason is a missing check for a null pointer - the cmdset_priv field is not set for this type of card. Fixes: 4844ef80305d ("mtd: cfi_cmdset_0002: Add support for polling status register") Signed-off-by: Andreas Persson <andreasp56@outlook.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/DB6P189MB05830B3530B8087476C5CFE4C1159@DB6P189MB0583.EURP189.PROD.OUTLOOK.COM Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-08-02T16:04:00+00:00 arun-pm arun.p.m@linux.intel.com 2019-12-03T11:52:28+00:00 urn:sha1:fcb13a4a74bbc407e4f7819dbe21dae4d5eb1e3f This commit adds spi driver quad io support for AST2600 Note:- Removed n25q00 Quad I/O support for the time being due to clock issue with chip 'Micron 8UA15 - rw182 (128MB)' while enabling Quad I/O mode. Signed-off-by: arun-pm <arun.p.m@linux.intel.com> 2021-07-16T07:01:11+00:00 Joel Stanley joel@jms.id.au 2021-07-16T07:01:07+00:00 urn:sha1:14e8d9d62d275e443ac5de3b31dffc5a4c810e15 This is the 5.10.50 stable release Signed-off-by: Joel Stanley <joel@jms.id.au> 2021-07-14T14:56:47+00:00 Yang Yingliang yangyingliang@huawei.com 2021-06-01T12:58:14+00:00 urn:sha1:c183b55ed7e5f59b2c509b7bc5b853e7c3b9e9e4 [ Upstream commit ae94c49527aa9bd3b563349adc4b5617747ca6bd ] Add clk_disable_unprepare() on error path in marvell_nfc_resume(). Fixes: bd9c3f9b3c00 ("mtd: rawnand: marvell: add suspend and resume hooks") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210601125814.3260364-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org> 2021-07-14T14:56:38+00:00 Miquel Raynal miquel.raynal@bootlin.com 2021-05-26T09:32:41+00:00 urn:sha1:cf05986cc4de00c522439620fbec1bbc2e5d1d5d [ Upstream commit b5437c7b682c9a505065b4ab4716cdc951dc3c7c ] The controller being always asserting one CS or the other, there is no need to actually select the right target before doing a page read/write. However, the anfc_select_target() helper actually also changes the timing configuration and clock in the case were two different NAND chips with different timing requirements would be used. In this situation, we must ensure proper configuration of the controller by calling it. As a consequence of this change, the anfc_select_target() helper is being moved earlier in the driver. Fixes: 88ffef1b65cf ("mtd: rawnand: arasan: Support the hardware BCH ECC engine") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210526093242.183847-4-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org> 2021-07-14T14:56:38+00:00 Corentin Labbe clabbe@baylibre.com 2021-05-20T11:48:50+00:00 urn:sha1:2f8824f556a3ebea9840c53326e55cc183316611 [ Upstream commit 237960880960863fb41888763d635b384cffb104 ] fis-index-block is seeked in the master node and not in the partitions node. For following binding and current usage, the driver need to check the partitions subnode. Fixes: c0e118c8a1a3 ("mtd: partitions: Add OF support to RedBoot partitions") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210520114851.1274609-1-clabbe@baylibre.com Signed-off-by: Sasha Levin <sashal@kernel.org> 2021-05-24T01:22:22+00:00 Joel Stanley joel@jms.id.au 2021-05-24T01:22:18+00:00 urn:sha1:45c6dc0de963bfdd8b468dceeea24f56a8e51424 This is the 5.10.39 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>