BMC/Intel-BMC/linux.git/drivers/mmc/core/sd.c, branch dev-4.3

mmc: core: Remove redundant ->power_restore() callback for SD

2015-06-04T08:03:51+00:00

Since the ->reset() callback is implemented for SD, the ->power_restore() callback has become redundant, let's remove it. Signed-off-by: Ulf Hansson

mmc: core: Record card drive strength

2015-06-01T07:07:13+00:00

In preparation for adding drive strength support for eMMC, add drive_strength to struct mmc_card to record the card drive strength for UHS-I modes and HS200 / HS400. For eMMC this will be needed when switching between HS200 and HS400. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson

mmc: core: Factor out common code in drive strength selection

2015-06-01T07:07:12+00:00

Make a new function out of common code used for drive strength selection. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson

mmc: core: Add 'card' to drive strength selection callback

2015-06-01T07:07:12+00:00

In preparation for supporting also eMMC drive strength, add the 'card' as a parameter so that the callback can distinguish different types of cards if necessary. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson

mmc: core: Simplify card drive strength mask

2015-06-01T07:07:11+00:00

Card drive strength selection uses a callback to which a mask of supported drive strengths is passed. Currently, the bits are checked against the values in the SD specifications. That is not necessary because the callback will anyway match the mask against a valid value. Simplify by taking the mask as is but still ensuring that the default mandatory value (type B) is always supported. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson

mmc: core: Allow card drive strength to be different to host

2015-06-01T07:07:11+00:00

Initialization of UHS-I modes for SD and SDIO cards employs a callback to allow the host driver to choose a drive strength value. Currently that assumes the card drive strength and host driver type must be the same value. Change to let the callback make that decision and return both the card drive strength and host driver type. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson

mmc: Add support for disabling write-protect detection

2015-06-01T07:06:59+00:00

It is not uncommon to see systems where there is no physical write-protect signal (e.g. when using eMMC or microSD card slots). For some controllers, which have a dedicated write-protection detection logic (like SDHCI controllers), the get_ro() callback can return bogus data in such a case. Instead of handling this on a per controller basis this patch adds a new capability flag to the MMC core that can be set to specify that the result of get_ro() is invalid. When the flag is set the core will not call get_ro() and assume that the card is always read-write. Signed-off-by: Lars-Peter Clausen Signed-off-by: Ulf Hansson

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2015-04-14T16:50:27+00:00

Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags

treewide: Fix typo in printk messages

2015-03-06T22:04:40+00:00

This patch fix spelling typo in printk messages. Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina

mmc: core: Simplify by adding mmc_execute_tuning()

2015-01-19T08:56:30+00:00

For each MMC, SD and SDIO there is code that holds the clock, calls ops->execute_tuning, and releases the clock. Simplify the code a bit by providing a separate function to do that. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson