BMC/Intel-BMC/linux.git/drivers/mmc/card, branch dev-4.6

mmc: longer timeout for long read time quirk

2016-06-01T19:18:00+00:00

commit 32ecd320db39bcb007679ed42f283740641b81ea upstream. 008GE0 Toshiba mmc in some Intel Baytrail tablets responds to MMC_SEND_EXT_CSD in 450-600ms. This patch will... () Increase the long read time quirk timeout from 300ms to 600ms. Original author of that quirk says 300ms was only a guess and that the number may need to be raised in the future. () Add this specific MMC to the quirk Signed-off-by: Matt Gumbel Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: block: Use the mmc host device index as the mmcblk device index

2016-04-14T09:39:34+00:00

Commit 520bd7a8b415 ("mmc: core: Optimize boot time by detecting cards simultaneously") causes regressions for some platforms. These platforms relies on fixed mmcblk device indexes, instead of deploying the defacto standard with UUID/PARTUUID. In other words their rootfs needs to be available at hardcoded paths, like /dev/mmcblk0p2. Such guarantees have never been made by the kernel, but clearly the above commit changes the behaviour. More precisely, because of that the order changes of how cards becomes detected, so do their corresponding mmcblk device indexes. As the above commit significantly improves boot time for some platforms (magnitude of seconds), let's avoid reverting this change but instead restore the behaviour of how mmcblk device indexes becomes picked. By using the same index for the mmcblk device as for the corresponding mmc host device, the probe order of mmc host devices decides the index we get for the mmcblk device. For those platforms that suffers from a regression, one could expect that this updated behaviour should be sufficient to meet their expectations of "fixed" mmcblk device indexes. Another side effect from this change, is that the same index is used for the mmc host device, the mmcblk device and the mmc block queue. That should clarify their relationship. Reported-by: Peter Hurley Reported-by: Laszlo Fiat Cc: Linus Torvalds Fixes: 520bd7a8b415 ("mmc: core: Optimize boot time by detecting cards simultaneously") Cc: Signed-off-by: Ulf Hansson

Merge tag 'mmc-v4.6' of git://git.linaro.org/people/ulf.hansson/mmc

2016-03-21T21:35:52+00:00

Pull MMC updates from Ulf Hansson: "MMC core: - Fix ABI regression of MMC BLK ioctl - Remove the unused MMC_DATA_STREAM flag - Enable asynchronous system PM for the host device - Minor fixes and clean-ups SDHCI host: Throughout the years, the numbers of SDHCI variants have increased and so has also the numbers of SDHCI callbacks/quirks. The purpose of these callbacks/quirks were to enable SDHCI to deal with variant specific requirements, but unfortunate this method didn't scale. Instead we have ended up with a mess. Not only did the code become suboptimal but also highly fragile. Lately many discussions of how to move forward with SDHCI has taken place at the MMC mailing list. Step by step, we aim to turn SDHCI's common code into a set of library functions. This will enable for optimizations and allow some of the existing callbacks and quirks to be removed, which also should help to make the code less fragile. Therefore I am also really pleased to announce that Adrian Hunter (Intel) has volunteered to step in as the maintainer for SDHCI. Future wise, I hope the community around SDHCI will continue to grow and that this release cycle can be the starting point of moving SDHCI into a better shape. As a matter of fact, already in this cycle the re-factoring has begun, but of course there are also fixes and new features included. Some highlights: - sdhci-iproc: Add support for Broadcom's BCM2835 eMMC IP - sdhci-acpi: Add support for QCOM controllers - sdhci-pic32: Add new SDHCI variant for PIC32MZDA Other hosts: - atmel-mci: Fix a NULL pointer dereference - mediatek: Add SD write-protect support - mmc_spi: Fix card detect in GPIO case - tmio/sdhi: Add r8a7795 support - tmio/sdhi: Some fixes and clean-ups - dw_mmc: Add HW reset support - dw_mmc: Some fixes and clean-ups - sunxi: Add support for MMC DDR52 mode" * tag 'mmc-v4.6' of git://git.linaro.org/people/ulf.hansson/mmc: (123 commits) mmc: sdhci-of-at91: fix wake-up issue when using runtime pm mmc: sdhci-pci: Do not set DMA mask in enable_dma() mmc: sdhci-acpi: Remove enable_dma() hook mmc: sdhci: Set DMA mask when adding host mmc: block: fix ABI regression of mmc_blk_ioctl mmc: atmel-mci: Check pdata for NULL before dereferencing it at DMA config mmc: core: remove redundant memset of sdio_read_cccr mmc: core: remove redundant memset of mmc_decode_cid mmc: of_mmc_spi: fix unused warning mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan mmc: sdhci-of-arasan: fix missing sdhci_pltfm_free for err handling mmc: sdhci-of-arasan: remove disable clk_ahb from sdhci_arasan_resume Documentation: bindings: add description of phy for sdhci-of-arasan mmc: sdhci: Fix override of timeout clk wrt max_busy_timeout mmc: mmci: Remove unnecessary header file mmc: sdhci-acpi: add QCOM controllers mmc: tegra: implement memcomp pad calibration mmc: mediatek: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch mmc: mediatek: Change signal voltage error to dev_dbg() mmc: sh_mmcif, tmio: Use ARCH_RENESAS ...

mmc: block: fix ABI regression of mmc_blk_ioctl

2016-03-17T13:54:42+00:00

If mmc_blk_ioctl returns -EINVAL, blkdev_ioctl continues to work without returning err to user-space. But now we check CAP_SYS_RAWIO firstly, so we return -EPERM to blkdev_ioctl, which make blkdev_ioctl return -EPERM to user-space directly. So this will break all the ioctl with BLKROSET. Now we find Android-adb suffer it for the following log: remount of /system failed; couldn't make block device writable: Operation not permitted openat(AT_FDCWD, "/dev/block/platform/ff420000.dwmmc/by-name/system", O_RDONLY) = 3 ioctl(3, BLKROSET, 0) = -1 EPERM (Operation not permitted) Fixes: a5f5774c55a2 ("mmc: block: Add new ioctl to send multi commands") Cc: stable@vger.kernel.org Signed-off-by: Shawn Lin Signed-off-by: Ulf Hansson

mmc: block: shut up "retrying because a re-tune was needed" message

2016-02-29T10:03:08+00:00

Re-tuning is part of standard requirements for the higher speed SD card protocols, and is not an error when this occurs. When we retry a command due to a retune, we should not print a message to the kernel log. Signed-off-by: Russell King Signed-off-by: Ulf Hansson

mmc: block: don't use the OR operation for flag of data

2016-02-29T10:03:03+00:00

After removed the MMC_DATA_STREAM, only two flags are remained. (MMC_DATA_READ and MMC_DATA_WRITE) The flags of READ and WRITE can't be used together. That's why it doesn't need to use "OR' operation. Signed-off-by: Jaehoon Chung Signed-off-by: Ulf Hansson

mmc: mmc_test: mention that '0' runs all tests

2016-02-29T10:02:54+00:00

I had to use the source to determine what I need to write to 'test' so that all tests are run. Let's mention this explicitly in 'testlist'. Signed-off-by: Wolfram Sang Signed-off-by: Ulf Hansson

Merge 4.5-rc4 into tty-next

2016-02-14T22:36:04+00:00

We want the fixes in here, and this resolves a merge error in tty_io.c Signed-off-by: Greg Kroah-Hartman

Revert "mmc: block: don't use parameter prefix if built as module"

2016-02-11T15:49:35+00:00

This reverts commit 829b6962f7e3cfc06f7c5c26269fd47ad48cf503. Revert this change as it causes a sysfs path to change and therefore introduces and ABI regression. More precisely Android's vold is not being able to access /sys/module/mmcblk/parameters/perdev_minors any more, since the path becomes changed to: "/sys/module/mmc_block/..." Fixes: 829b6962f7e3 ("mmc: block: don't use parameter prefix if built as module") Reported-by: John Stultz Cc: Andy Shevchenko Signed-off-by: Ulf Hansson

mmc: block: return error on failed mmc_blk_get()

2016-02-10T08:12:34+00:00

This used to return -EFAULT, but the function above returns -EINVAL on the same condition so let's stick to that. The removal of error return on this path was introduced with b093410c9aef ('mmc: block: copy resp[] data on err for MMC_IOC_MULTI_CMD'). Fixes: b093410c9aef ('mmc: block: copy resp[] data on err for MMC_IOC_MULTI_CMD'). Signed-off-by: Olof Johansson Cc: Grant Grundler Signed-off-by: Ulf Hansson