<feed xmlns='http://www.w3.org/2005/Atom'>
<title>BMC/Intel-BMC/linux.git/drivers/mmc/card, branch dev-4.3</title>
<subtitle>Intel OpenBMC Linux kernel source tree (mirror)</subtitle>
<id>https://git.radix-linux.su/BMC/Intel-BMC/linux.git/atom?h=dev-4.3</id>
<link rel='self' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/atom?h=dev-4.3'/>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/'/>
<updated>2015-10-21T08:18:11+00:00</updated>
<entry>
<title>mmc: core: Fix init_card in 52Mhz</title>
<updated>2015-10-21T08:18:11+00:00</updated>
<author>
<name>Chaotian Jing</name>
<email>chaotian.jing@mediatek.com</email>
</author>
<published>2015-10-12T09:22:23+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=08b137d90eec51b0e90c42e123ca8ceb118d233f'/>
<id>urn:sha1:08b137d90eec51b0e90c42e123ca8ceb118d233f</id>
<content type='text'>
Suppose that we got a data crc error, and it triggers the mmc_reset.
mmc_reset will call mmc_send_status to see if HW reset was supported.
before issue CMD13, it will do retune, and if EMMC was in HS400 mode,
it will reduce frequency to 52Mhz firstly, then results in card init
was doing at 52Mhz.
The mmc_send_status was originally only done for mmc_test, should drop
it. And, rename the "eMMC hardware reset" to "Reset test", as we would
also be able to use the test for SD-cards.

Signed-off-by: Chaotian Jing &lt;chaotian.jing@mediatek.com&gt;
Suggested-by: Adrian Hunter &lt;adrian.hunter@intel.com&gt;
Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors")
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>Merge tag 'mmc-v4.3' of git://git.linaro.org/people/ulf.hansson/mmc</title>
<updated>2015-09-08T23:33:16+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2015-09-08T23:33:16+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=85579ad7f1dfc0b72bb243b7227bc4f663035e71'/>
<id>urn:sha1:85579ad7f1dfc0b72bb243b7227bc4f663035e71</id>
<content type='text'>
Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fix a race condition in the request handling
   - Skip trim commands for some buggy kingston eMMCs
   - An optimization and a correction for erase groups
   - Set CMD23 quirk for some Sandisk cards

  MMC host:
   - sdhci: Give GPIO CD higher precedence and don't poll when it's used
   - sdhci: Fix DMA memory leakage
   - sdhci: Some updates for clock management
   - sdhci-of-at91: introduce driver for the Atmel SDMMC
   - sdhci-of-arasan: Add support for sdhci-5.1
   - sdhci-esdhc-imx: Add support for imx7d which also supports HS400
   - sdhci: A collection of fixes and improvements for various sdhci hosts
   - omap_hsmmc: Modernization of the regulator code
   - dw_mmc: A couple of fixes for DMA and PIO mode
   - usdhi6rol0: A few fixes and support probe deferral for regulators
   - pxamci: Convert to use dmaengine
   - sh_mmcif: Fix the suspend process in a short term solution
   - tmio: Adjust timeout for commands
   - sunxi: Fix timeout while gating/ungating clock"

* tag 'mmc-v4.3' of git://git.linaro.org/people/ulf.hansson/mmc: (67 commits)
  mmc: android-goldfish: remove incorrect __iomem annotation
  mmc: core: fix race condition in mmc_wait_data_done
  mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check
  mmc: host: omap_hsmmc: use ios-&gt;vdd for setting vmmc voltage
  mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status
  mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on previous state
  mmc: host: omap_hsmmc: don't use -&gt;set_power to set initial regulator state
  mmc: host: omap_hsmmc: avoid pbias regulator enable on power off
  mmc: host: omap_hsmmc: add separate function to set pbias
  mmc: host: omap_hsmmc: add separate functions for enable/disable supply
  mmc: host: omap_hsmmc: return error if any of the regulator APIs fail
  mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage
  mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc
  mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator
  mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get()
  mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get
  mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc
  mmc: sdhci-of-at91: fix platform_no_drv_owner.cocci warnings
  mmc: sh_mmcif: Fix suspend process
  mmc: usdhi6rol0: fix error return code
  ...
</content>
</entry>
<entry>
<title>Merge branch 'for-4.3/sg' of git://git.kernel.dk/linux-block</title>
<updated>2015-09-02T20:22:38+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2015-09-02T20:22:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=d975f309a8b250e67b66eabeb56be6989c783629'/>
<id>urn:sha1:d975f309a8b250e67b66eabeb56be6989c783629</id>
<content type='text'>
Pull SG updates from Jens Axboe:
 "This contains a set of scatter-gather related changes/fixes for 4.3:

   - Add support for limited chaining of sg tables even for
     architectures that do not set ARCH_HAS_SG_CHAIN.  From Christoph.

   - Add sg chain support to target_rd.  From Christoph.

   - Fixup open coded sg-&gt;page_link in crypto/omap-sham.  From
     Christoph.

   - Fixup open coded crypto -&gt;page_link manipulation.  From Dan.

   - Also from Dan, automated fixup of manual sg_unmark_end()
     manipulations.

   - Also from Dan, automated fixup of open coded sg_phys()
     implementations.

   - From Robert Jarzmik, addition of an sg table splitting helper that
     drivers can use"

* 'for-4.3/sg' of git://git.kernel.dk/linux-block:
  lib: scatterlist: add sg splitting function
  scatterlist: use sg_phys()
  crypto/omap-sham: remove an open coded access to -&gt;page_link
  scatterlist: remove open coded sg_unmark_end instances
  crypto: replace scatterwalk_sg_chain with sg_chain
  target/rd: always chain S/G list
  scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
</content>
</entry>
<entry>
<title>Merge branch 'for-4.3/core' of git://git.kernel.dk/linux-block</title>
<updated>2015-09-02T20:10:25+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2015-09-02T20:10:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=1081230b748de8f03f37f80c53dfa89feda9b8de'/>
<id>urn:sha1:1081230b748de8f03f37f80c53dfa89feda9b8de</id>
<content type='text'>
Pull core block updates from Jens Axboe:
 "This first core part of the block IO changes contains:

   - Cleanup of the bio IO error signaling from Christoph.  We used to
     rely on the uptodate bit and passing around of an error, now we
     store the error in the bio itself.

   - Improvement of the above from myself, by shrinking the bio size
     down again to fit in two cachelines on x86-64.

   - Revert of the max_hw_sectors cap removal from a revision again,
     from Jeff Moyer.  This caused performance regressions in various
     tests.  Reinstate the limit, bump it to a more reasonable size
     instead.

   - Make /sys/block/&lt;dev&gt;/queue/discard_max_bytes writeable, by me.
     Most devices have huge trim limits, which can cause nasty latencies
     when deleting files.  Enable the admin to configure the size down.
     We will look into having a more sane default instead of UINT_MAX
     sectors.

   - Improvement of the SGP gaps logic from Keith Busch.

   - Enable the block core to handle arbitrarily sized bios, which
     enables a nice simplification of bio_add_page() (which is an IO hot
     path).  From Kent.

   - Improvements to the partition io stats accounting, making it
     faster.  From Ming Lei.

   - Also from Ming Lei, a basic fixup for overflow of the sysfs pending
     file in blk-mq, as well as a fix for a blk-mq timeout race
     condition.

   - Ming Lin has been carrying Kents above mentioned patches forward
     for a while, and testing them.  Ming also did a few fixes around
     that.

   - Sasha Levin found and fixed a use-after-free problem introduced by
     the bio-&gt;bi_error changes from Christoph.

   - Small blk cgroup cleanup from Viresh Kumar"

* 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits)
  blk: Fix bio_io_vec index when checking bvec gaps
  block: Replace SG_GAPS with new queue limits mask
  block: bump BLK_DEF_MAX_SECTORS to 2560
  Revert "block: remove artifical max_hw_sectors cap"
  blk-mq: fix race between timeout and freeing request
  blk-mq: fix buffer overflow when reading sysfs file of 'pending'
  Documentation: update notes in biovecs about arbitrarily sized bios
  block: remove bio_get_nr_vecs()
  fs: use helper bio_add_page() instead of open coding on bi_io_vec
  block: kill merge_bvec_fn() completely
  md/raid5: get rid of bio_fits_rdev()
  md/raid5: split bio for chunk_aligned_read
  block: remove split code in blkdev_issue_{discard,write_same}
  btrfs: remove bio splitting and merge_bvec_fn() calls
  bcache: remove driver private bio splitting code
  block: simplify bio_add_page()
  block: make generic_make_request handle arbitrarily sized bios
  blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL)
  block: don't access bio-&gt;bi_error after bio_put()
  block: shrink struct bio down to 2 cache lines again
  ...
</content>
</entry>
<entry>
<title>mmc: block: skip trim for some kingston eMMCs</title>
<updated>2015-08-27T12:50:52+00:00</updated>
<author>
<name>Shawn Lin</name>
<email>shawn.lin@rock-chips.com</email>
</author>
<published>2015-08-12T05:08:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=b5b4ff0a633910b2b9dca7915fd6ab17aa10dc3e'/>
<id>urn:sha1:b5b4ff0a633910b2b9dca7915fd6ab17aa10dc3e</id>
<content type='text'>
For some mass production of kingston eMMCs which adopt Phison's
firmware will meet an unrecoverable data conrruption occasionally
if performing trim due to a firmware bug confirmed by vendor. We
found it on Intel-C3230RK platform. So we add fixup of broken trim
for it.

Signed-off-by: Shawn Lin &lt;shawn.lin@rock-chips.com&gt;
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>scatterlist: remove open coded sg_unmark_end instances</title>
<updated>2015-08-17T14:12:56+00:00</updated>
<author>
<name>Dan Williams</name>
<email>dan.j.williams@intel.com</email>
</author>
<published>2015-08-07T16:15:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=da81ed16bdb3bc1bf92e6cb3340915a3204d5ace'/>
<id>urn:sha1:da81ed16bdb3bc1bf92e6cb3340915a3204d5ace</id>
<content type='text'>
Signed-off-by: Dan Williams &lt;dan.j.williams@intel.com&gt;
[hch: split from a larger patch by Dan]
Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</content>
</entry>
<entry>
<title>mmc: block: add fixup of broken CMD23 for Sandisk card</title>
<updated>2015-08-17T09:32:47+00:00</updated>
<author>
<name>Yangbo Lu</name>
<email>yangbo.lu@freescale.com</email>
</author>
<published>2015-07-10T03:44:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=7d70d476d0112b44bf93747934ff089c50549e6d'/>
<id>urn:sha1:7d70d476d0112b44bf93747934ff089c50549e6d</id>
<content type='text'>
Some Sandisk cards(such as "SDMB-32" and "SDM032" cards)
can't support CMD23, and would generate CMD timeout. So add
FIX-UP for these two types Sandisk cards.

Error log:
mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900
mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900
mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900
end_request: I/O error, dev mmcblk0, sector 0
Buffer I/O error on device mmcblk0, logical block 0
mmcblk0: timed out sending SET_BLOCK_COUNT command, card status 0x400900

Signed-off-by: Yangbo Lu &lt;yangbo.lu@freescale.com&gt;
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>mmc: block: don't use parameter prefix if built as module</title>
<updated>2015-08-17T09:32:42+00:00</updated>
<author>
<name>Andy Shevchenko</name>
<email>andriy.shevchenko@linux.intel.com</email>
</author>
<published>2015-06-24T11:32:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=829b6962f7e3cfc06f7c5c26269fd47ad48cf503'/>
<id>urn:sha1:829b6962f7e3cfc06f7c5c26269fd47ad48cf503</id>
<content type='text'>
It's excessive to use prefix for the parameters when you do
modprobe mmc-block mmcblk.perdev_minors=16

Make this available only for built-in case.

Signed-off-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>mmc: block: Add missing mmc_blk_put() in power_ro_lock_show()</title>
<updated>2015-07-24T08:18:34+00:00</updated>
<author>
<name>Tomas Winkler</name>
<email>tomas.winkler@intel.com</email>
</author>
<published>2015-07-16T13:50:45+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=9098f84cced870f54d8c410dd2444cfa61467fa0'/>
<id>urn:sha1:9098f84cced870f54d8c410dd2444cfa61467fa0</id>
<content type='text'>
Enclosing mmc_blk_put() is missing in power_ro_lock_show() sysfs handler,
let's add it.

Fixes: add710eaa886 ("mmc: boot partition ro lock support")
Signed-off-by: Tomas Winkler &lt;tomas.winkler@intel.com&gt;
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>block: have drivers use blk_queue_max_discard_sectors()</title>
<updated>2015-07-17T14:41:53+00:00</updated>
<author>
<name>Jens Axboe</name>
<email>axboe@fb.com</email>
</author>
<published>2015-07-14T14:15:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.radix-linux.su/BMC/Intel-BMC/linux.git/commit/?id=2bb4cd5cc472b191a46938becb7dafdd44644329'/>
<id>urn:sha1:2bb4cd5cc472b191a46938becb7dafdd44644329</id>
<content type='text'>
Some drivers use it now, others just set the limits field manually.
But in preparation for splitting this into a hard and soft limit,
ensure that they all call the proper function for setting the hw
limit for discards.

Reviewed-by: Jeff Moyer &lt;jmoyer@redhat.com&gt;
Signed-off-by: Jens Axboe &lt;axboe@fb.com&gt;
</content>
</entry>
</feed>
