BMC/Intel-BMC/linux.git/drivers/media/platform, branch dev-5.2

Merge tag 'v5.2.14' into dev-5.2

2019-09-10T13:43:25+00:00

This is the 5.2.14 stable release Signed-off-by: Joel Stanley

omap-dma/omap_vout_vrfb: fix off-by-one fi value

2019-09-06T08:23:18+00:00

[ Upstream commit d555c34338cae844b207564c482e5a3fb089d25e ] The OMAP 4 TRM specifies that when using double-index addressing the address increases by the ES plus the EI value minus 1 within a frame. When a full frame is transferred, the address increases by the ES plus the frame index (FI) value minus 1. The omap-dma code didn't account for the 'minus 1' in the FI register. To get correct addressing, add 1 to the src_icg value. This was found when testing a hacked version of the media m2m-deinterlace.c driver on a Pandaboard. The only other source that uses this feature is omap_vout_vrfb.c, and that adds a + 1 when setting the dst_icg. This is a workaround for the broken omap-dma.c behavior. So remove the workaround at the same time that we fix omap-dma.c. I tested the omap_vout driver with a Beagle XM board to check that the '+ 1' in omap_vout_vrfb.c was indeed a workaround for the omap-dma bug. Signed-off-by: Hans Verkuil Reviewed-by: Laurent Pinchart Acked-by: Peter Ujfalusi Acked-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/952e7f51-f208-9333-6f58-b7ed20d2ea0b@xs4all.nl Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

Merge tag 'v5.2.7' into dev-5.2

2019-08-09T07:15:09+00:00

This is the 5.2.7 stable release Signed-off-by: Joel Stanley

media: drivers: media: coda: fix warning same module names

2019-07-31T05:24:27+00:00

commit 1296987d2baf7f56748359b8dd42c425b9e7ee3a upstream. When building with CONFIG_VIDEO_CODA and CONFIG_CODA_FS enabled as loadable modules, we see the following warning: fs/coda/coda.ko drivers/media/platform/coda/coda.ko Rework so media/platform/coda is named coda-vpu. Leaving CODA_FS as is since that's a well known module. Signed-off-by: Anders Roxell Reviewed-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: coda: Remove unbalanced and unneeded mutex unlock

2019-07-26T07:10:58+00:00

commit 766b9b168f6c75c350dd87c3e0bc6a9b322f0013 upstream. The mutex unlock in the threaded interrupt handler is not paired with any mutex lock. Remove it. This bug has been here for a really long time, so it applies to any stable repo. Reviewed-by: Philipp Zabel Signed-off-by: Ezequiel Garcia Signed-off-by: Hans Verkuil Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: vimc: cap: check v4l2_fill_pixfmt return value

2019-07-26T07:10:33+00:00

[ Upstream commit 77ae46e11df5c96bb4582633851f838f5d954df4 ] v4l2_fill_pixfmt() returns -EINVAL if the pixelformat used as parameter is invalid or if the user is trying to use a multiplanar format with the singleplanar API. Currently, the vimc_cap_try_fmt_vid_cap() returns such value, but vimc_cap_s_fmt_vid_cap() is ignoring it. Fix that and returns an error value if vimc_cap_try_fmt_vid_cap() has failed. Signed-off-by: André Almeida Suggested-by: Helen Koike Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: coda: increment sequence offset for the last returned frame

2019-07-26T07:10:33+00:00

[ Upstream commit b3b7d96817cdb8b6fc353867705275dce8f41ccc ] If no more frames are decoded in bitstream end mode, and a previously decoded frame has been returned, the firmware still increments the frame number. To avoid a sequence number mismatch after decoder restart, increment the sequence_offset correction parameter. Signed-off-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: coda: fix last buffer handling in V4L2_ENC_CMD_STOP

2019-07-26T07:10:33+00:00

[ Upstream commit f3775f89852d167990b0d718587774cf00d22ac2 ] coda_encoder_cmd() is racy, as the last scheduled picture run worker can still be in-flight while the ENC_CMD_STOP command is issued. Depending on the exact timing the sequence numbers might already be changed, but the last buffer might not have been put on the destination queue yet. In this case the current implementation would prematurely wake the destination queue with last_buffer_dequeued=true, causing userspace to call streamoff before the last buffer is handled. Close this race window by synchronizing with the pic_run_worker before doing the sequence check. Signed-off-by: Marco Felsch [l.stach@pengutronix.de: switch to flush_work, reword commit message] Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: coda: fix mpeg2 sequence number handling

2019-07-26T07:10:33+00:00

[ Upstream commit 56d159a4ec6d8da7313aac6fcbb95d8fffe689ba ] Sequence number handling assumed that the BIT processor frame number starts counting at 1, but this is not true for the MPEG-2 decoder, which starts at 0. Fix the sequence counter offset detection to handle this. Signed-off-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: s5p-mfc: Make additional clocks optional

2019-07-26T07:10:32+00:00

[ Upstream commit e08efef8fe7db87206314c19b341612c719f891a ] Since the beginning the second clock ('special', 'sclk') was optional and it is not available on some variants of Exynos SoCs (i.e. Exynos5420 with v7 of MFC hardware). However commit 1bce6fb3edf1 ("[media] s5p-mfc: Rework clock handling") made handling of all specified clocks mandatory. This patch restores original behavior of the driver and fixes its operation on Exynos5420 SoCs. Fixes: 1bce6fb3edf1 ("[media] s5p-mfc: Rework clock handling") Signed-off-by: Marek Szyprowski Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin