Intel OpenBMC Linux kernel source tree (mirror) https://git.radix-linux.su/BMC/Intel-BMC/linux.git/atom?h=dev 2015-08-21T18:03:06+00:00 2015-08-21T18:03:06+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-08-21T18:03:06+00:00 urn:sha1:00f76410461fe7abdd2e579ca21e4818f7be0843 Pull media fixes from Mauro Carvalho Chehab: - a regression fix at the videobuf2 core driver - fix error handling at mantis probing code - revert the IR encode patches, as the API is not mature enough. So, better to postpone the changes to a latter Kernel - fix Kconfig breakages on some randconfig scenarios. * tag 'media/v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] mantis: Fix error handling in mantis_dma_init() Revert "[media] rc: rc-ir-raw: Add scancode encoder callback" Revert "[media] rc: rc-ir-raw: Add Manchester encoder (phase encoder) helper" Revert "[media] rc: ir-rc5-decoder: Add encode capability" Revert "[media] rc: ir-rc6-decoder: Add encode capability" Revert "[media] rc: rc-core: Add support for encode_wakeup drivers" Revert "[media] rc: rc-loopback: Add loopback of filter scancodes" Revert "[media] rc: nuvoton-cir: Add support for writing wakeup samples via sysfs filter callback" [media] vb2: Fix compilation breakage when !CONFIG_BUG [media] vb2: Only requeue buffers immediately once streaming is started [media] media/pci/cobalt: fix Kconfig and build when SND is not enabled [media] media/dvb: fix ts2020.c Kconfig and build 2015-08-19T10:04:55+00:00 Fabio Estevam fabio.estevam@freescale.com 2015-08-10T17:11:41+00:00 urn:sha1:02387b5f25bdba668c7fe2618697bae24f973667 Current code assigns 0 to variable 'err', which makes mantis_dma_init() to return success even if mantis_alloc_buffers() fails. Fix it by checking the return value from mantis_alloc_buffers() and propagating it in the case of error. Reported-by: RUC_Soft_Sec <zy900702@163.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 2015-07-21T07:42:54+00:00 Luis R. Rodriguez mcgrof@suse.com 2015-07-17T21:07:25+00:00 urn:sha1:f5530d5af835ffa82a0607f5f1977d63ac02551f On built-in kernels this warning will always splat, even if no ivtvfb hardware is present, as this is part of the module init: if (WARN(pat_enabled(), "ivtvfb needs PAT disabled, boot with nopat kernel parameter\n")) { Fix that by shifting the PAT requirement check out under the code that does the "quasi-probe" for the device. This device driver relies on an existing driver to find its own devices, it looks for that device driver and its own found devices, then uses driver_for_each_device() to try to see if it can probe each of those devices as a frambuffer device with ivtvfb_init_card(). We tuck the PAT requiremenet check then on the ivtvfb_init_card() call making the check at least require an ivtv device present before complaining. Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot] Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andy@silverblocksystems.net Cc: benh@kernel.crashing.org Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: dledford@redhat.com Cc: jkosina@suse.cz Cc: julia.lawall@lip6.fr Cc: luto@amacapital.net Cc: mchehab@osg.samsung.com Link: http://lkml.kernel.org/r/1437167245-28273-3-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 2015-07-17T12:00:12+00:00 Sakari Ailus sakari.ailus@linux.intel.com 2015-07-03T07:37:07+00:00 urn:sha1:6d058c5643e16779ae4c001d2e893c140940e48f Buffers can be returned back to videobuf2 in driver's streamon handler. In this case vb2_buffer_done() with buffer state VB2_BUF_STATE_QUEUED will cause the driver's buf_queue vb2 operation to be called, queueing the same buffer again only to be returned to videobuf2 using vb2_buffer_done() and so on. Add a new buffer state VB2_BUF_STATE_REQUEUEING which, when used as the state argument to vb2_buffer_done(), will result in buffers queued to the driver. Using VB2_BUF_STATE_QUEUED will leave the buffer to videobuf2, as it was before "[media] vb2: allow requeuing buffers while streaming". Fixes: ce0eff016f72 ("[media] vb2: allow requeuing buffers while streaming") [mchehab@osg.samsung.com: fix warning: enumeration value 'VB2_BUF_STATE_REQUEUEING' not handled in switch] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v4.1 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 2015-07-01T19:31:33+00:00 Randy Dunlap rdunlap@infradead.org 2015-06-26T20:43:24+00:00 urn:sha1:5bab86243d949cf021b0f104faafc18f5d20283c Fix build errors in cobalt driver when CONFIG_SND is not enabled. Fixes these build errors: ERROR: "snd_pcm_period_elapsed" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "_snd_pcm_stream_lock_irqsave" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_hw_constraint_integer" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_set_ops" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_stream_unlock_irqrestore" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_card_new" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_card_free" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_card_register" [drivers/media/pci/cobalt/cobalt.ko] undefined! ERROR: "snd_pcm_new" [drivers/media/pci/cobalt/cobalt.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 2015-06-26T22:46:08+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-06-26T22:46:08+00:00 urn:sha1:23908db413eccd77084b09c9b0a4451dfb0524c0 Pull staging driver updates from Greg KH: "Here's the big, really big, staging tree patches for 4.2-rc1. Loads of stuff in here, almost all just coding style fixes / churn, and a few new drivers as well, one of which I just disabled from the build a few minutes ago due to way too many build warnings. Other than the one "disable this driver" patch, all of these have been in linux-next for quite a while with no reported issues" * tag 'staging-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1163 commits) staging: wilc1000: disable driver due to build warnings Staging: rts5208: fix CHANGE_LINK_STATE value Staging: sm750fb: ddk750_swi2c.c: Insert spaces before parenthesis Staging: sm750fb: ddk750_swi2c.c: Place braces on correct lines Staging: sm750fb: ddk750_swi2c.c: Insert spaces around operators Staging: sm750fb: ddk750_swi2c.c: Replace spaces with tabs Staging: sm750fb: ddk750_swi2c.h: Shorten lines to under 80 characters Staging: sm750fb: ddk750_swi2c.h: Replace spaces with tabs Staging: sm750fb: modedb.h: Shorten lines to under 80 characters Staging: sm750fb: modedb.h: Replace spaces with tabs staging: comedi: addi_apci_3120: rename 'this_board' variables staging: comedi: addi_apci_1516: rename 'this_board' variables staging: comedi: ni_atmio: cleanup ni_getboardtype() staging: comedi: vmk80xx: sanity check context used to get the boardinfo staging: comedi: vmk80xx: rename 'boardinfo' variables staging: comedi: dt3000: rename 'this_board' variables staging: comedi: adv_pci_dio: rename 'this_board' variables staging: comedi: cb_pcidas64: rename 'thisboard' variables staging: comedi: cb_pcidas: rename 'thisboard' variables staging: comedi: me4000: rename 'thisboard' variables ... 2015-06-26T00:55:48+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-06-26T00:55:48+00:00 urn:sha1:5b4ca4447757019f11a601b0009534ef84bed801 Pull media updates from Mauro Carvalho Chehab: - Lots of improvements at the DVB API DocBook documentation. Now, the frontend and the network APIs are fully in sync with the Kernel and looks more like the rest of the media documentation; - New frontend driver: cx24120 - New driver for a PCI device: cobalt. This driver is actually not sold in the market, but it is a good example of a multi-HDMI input device; - The dt3155 driver were promoted from staging; - The mantis driver got remote controller support; - New V4L2 driver for ST bdisp SoC chipsets; - Make sparse and smatch happier: several bugs were solved by fixing the issues reported by those static code analyzers. - Lots of new device additions, new features, improvements and cleanups at the existing drivers. * tag 'media/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (553 commits) [media] lmedm04: fix the range for relative measurements [media] lmedm04: use u32 instead of u64 for relative stats [media] omap3isp: remove unused var [media] saa7134: fix page size on some archs [media] use CONFIG_PM_SLEEP for suspend/resume [media] tuner-i2c: be consistent with I2C declaration [media] si470x: cleanup define namespace [media] bdisp: prevent compiling on random arch [media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers [media] MAINTAINERS: Add entry for the Renesas VSP1 driver [media] videodev2.h: fix copy-and-paste error in V4L2_MAP_XFER_FUNC_DEFAULT [media] Revert "[media] vb2: Push mmap_sem down to memops" [media] mantis: cleanup a warning [media] bdisp-debug: don't try to divide by s64 [media] cx88: don't declare restart_video_queue if not used [media] au0828: move dev->boards atribuition to happen earlier [media] lmedm04: implement dvb v5 statistics [media] bdisp: remove unused var [media] bdisp: remove needless check ts2020: fix compilation on i386 ... 2015-06-24T11:38:28+00:00 Mauro Carvalho Chehab mchehab@osg.samsung.com 2015-06-22T19:40:39+00:00 urn:sha1:816de50d35743088f18e0da9e03e3347c768b7a2 On some archs, like tile, the PAGE_SIZE is not 4K. In the case of tile arch, it can be either 16KB or 64KB. Due to that, a warning is produced: drivers/media/pci/saa7134/saa7134.h:678:43: warning: large integer implicitly truncated to unsigned type [-Woverflow] This is actually an error, as it will write trach to the DMA size registers. The logic at saa7134-ts already does the right thing: saa_writeb(SAA7134_TS_DMA0, ((dev->ts.nr_packets-1)&0xff)); saa_writeb(SAA7134_TS_DMA1, (((dev->ts.nr_packets-1)>>8)&0xff)); /* TSNOPIT=0, TSCOLAP=0 */ saa_writeb(SAA7134_TS_DMA2, ((((dev->ts.nr_packets-1)>>16)&0x3f) | 0x00)); So, fix the driver to take larger page sizes into account. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> 2015-06-23T21:08:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-06-23T21:08:54+00:00 urn:sha1:cb8a4deaf9b2778653c4391d8ccb24c5ab159f9d Pull trivial tree updates from Jiri Kosina: "As usual, mostly comment, kerneldoc and printk() fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: lpfc: Grammar s/an negative/a negative/ ARM: lib/lib1funcs.S: fix typo s/substractions/subtractions/ cx25821: cx25821-medusa-reg.h: fix 0x0x prefix lib: crc-itu-t.[ch] fix 0x0x prefix in integer constants rapidio: Fix kerneldoc and comment qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config() treewide: Kconfig: fix wording / spelling usb/serial: fix grammar in Kconfig help text for FTDI_SIO megaraid_sas: fix kerneldoc netfilter: ebtables: fix comment grammar drm/radeon: fix comment isdn: fix grammar in comment ARM: KVM: fix comment 2015-06-18T17:32:21+00:00 Mauro Carvalho Chehab mchehab@osg.samsung.com 2015-06-18T17:31:38+00:00 urn:sha1:6fe2d69c07864eecf33373b0e4be401737e37fa4 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> drivers/media/pci/mantis/mantis_i2c.c: In function 'mantis_i2c_init': drivers/media/pci/mantis/mantis_i2c.c:222:15: warning: variable 'intmask' set but not used [-Wunused-but-set-variable] u32 intstat, intmask;