BMC/Intel-BMC/linux.git/drivers/md/md-cluster.c, branch dev-4.19

md-cluster: release RESYNC lock after the last resync message

2018-09-01T00:38:10+00:00

All the RESYNC messages are sent with resync lock held, the only exception is resync_finish which releases resync_lockres before send the last resync message, this should be changed as well. Otherwise, we can see deadlock issue as follows: clustermd2-gqjiang2:~ # cat /proc/mdstat Personalities : [raid10] [raid1] md0 : active raid1 sdg[0] sdf[1] 134144 blocks super 1.2 [2/2] [UU] [===================>.] resync = 99.6% (134144/134144) finish=0.0min speed=26K/sec bitmap: 1/1 pages [4KB], 65536KB chunk unused devices: clustermd2-gqjiang2:~ # ps aux|grep md|grep D root 20497 0.0 0.0 0 0 ? D 16:00 0:00 [md0_raid1] clustermd2-gqjiang2:~ # cat /proc/20497/stack [] dlm_lock_sync+0x8e/0xc0 [md_cluster] [] __sendmsg+0x98/0x130 [md_cluster] [] sendmsg+0x20/0x30 [md_cluster] [] resync_info_update+0xb5/0xc0 [md_cluster] [] md_reap_sync_thread+0x134/0x170 [md_mod] [] md_check_recovery+0x28c/0x510 [md_mod] [] raid1d+0x42/0x800 [raid1] [] md_thread+0x121/0x150 [md_mod] [] kthread+0xff/0x140 [] ret_from_fork+0x35/0x40 [] 0xffffffffffffffff clustermd-gqjiang1:~ # ps aux|grep md|grep D root 20531 0.0 0.0 0 0 ? D 16:00 0:00 [md0_raid1] root 20537 0.0 0.0 0 0 ? D 16:00 0:00 [md0_cluster_rec] root 20676 0.0 0.0 0 0 ? D 16:01 0:00 [md0_resync] clustermd-gqjiang1:~ # cat /proc/mdstat Personalities : [raid10] [raid1] md0 : active raid1 sdf[1] sdg[0] 134144 blocks super 1.2 [2/2] [UU] [===================>.] resync = 97.3% (131072/134144) finish=8076.8min speed=0K/sec bitmap: 1/1 pages [4KB], 65536KB chunk unused devices: clustermd-gqjiang1:~ # cat /proc/20531/stack [] metadata_update_start+0xcd/0xd0 [md_cluster] [] md_update_sb.part.61+0x97/0x820 [md_mod] [] md_check_recovery+0x29b/0x510 [md_mod] [] raid1d+0x42/0x800 [raid1] [] md_thread+0x121/0x150 [md_mod] [] kthread+0xff/0x140 [] ret_from_fork+0x35/0x40 [] 0xffffffffffffffff clustermd-gqjiang1:~ # cat /proc/20537/stack [] freeze_array+0xf2/0x140 [raid1] [] recv_daemon+0x41e/0x580 [md_cluster] [] md_thread+0x121/0x150 [md_mod] [] kthread+0xff/0x140 [] ret_from_fork+0x35/0x40 [] 0xffffffffffffffff clustermd-gqjiang1:~ # cat /proc/20676/stack [] dlm_lock_sync+0x8e/0xc0 [md_cluster] [] lock_token+0x2f/0xa0 [md_cluster] [] lock_comm+0x32/0x90 [md_cluster] [] sendmsg+0x15/0x30 [md_cluster] [] resync_info_update+0x8a/0xc0 [md_cluster] [] raid1_sync_request+0xa9a/0xb10 [raid1] [] md_do_sync+0xbaa/0xf90 [md_mod] [] md_thread+0x121/0x150 [md_mod] [] kthread+0xff/0x140 [] ret_from_fork+0x35/0x40 [] 0xffffffffffffffff Reviewed-by: NeilBrown Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2018-08-18T23:48:07+00:00

Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...

md: Avoid namespace collision with bitmap API

2018-08-01T22:49:39+00:00

bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko Acked-by: Shaohua Li Signed-off-by: Dmitry Torokhov

md-cluster: don't send msg if array is closing

2018-07-05T18:17:02+00:00

If we close an array which resync thread is running, then we don't need the node to send msg since another node would launch the resync thread to continue the rest works. Also send a message is time consuming, we should avoid it. Signed-off-by: Guoqing Jiang Reviewed-by: NeilBrown Signed-off-by: Shaohua Li

md-cluster: show array's status more accurate

2018-07-05T18:17:01+00:00

When resync or recovery is happening in one node, other nodes don't show the appropriate info now. For example, when create an array in master node without "--assume-clean", then assemble the array in slave nodes, you can see "resync=PENDING" when read /proc/mdstat in slave nodes. However, the info is confusing since "PENDING" status is introduced for start array in read-only mode. We introduce RESYNCING_REMOTE flag to indicate that resync thread is running in remote node. The flags is set when node receive RESYNCING msg. And we clear the REMOTE flag in following cases: 1. resync or recover is finished in master node, which means slaves receive msg with both lo and hi are set to 0. 2. node continues resync/recovery in recover_bitmaps. 3. when resync_finish is called. Then we show accurate information in status_resync by check REMOTE flags and with other conditions. Signed-off-by: Guoqing Jiang Reviewed-by: NeilBrown Signed-off-by: Shaohua Li

md-cluster: clear another node's suspend_area after the copy is finished

2018-07-05T18:17:01+00:00

When one node leaves cluster or stops the resyncing (resync or recovery) array, then other nodes need to call recover_bitmaps to continue the unfinished task. But we need to clear suspend_area later after other nodes copy the resync information to their bitmap (by call bitmap_copy_from_slot). Otherwise, all nodes could write to the suspend_area even the suspend_area is not handled by any node, because area_resyncing returns 0 at the beginning of raid1_write_request. Which means one node could write suspend_area while another node is resyncing the same area, then data could be inconsistent. So let's clear suspend_area later to avoid above issue with the protection of bm lock. Also it is straightforward to clear suspend_area after nodes have copied the resync info to bitmap. Signed-off-by: Guoqing Jiang Reviewed-by: NeilBrown Signed-off-by: Shaohua Li

treewide: kzalloc() -> kcalloc()

2018-06-12T23:19:22+00:00

The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook

md-cluster: update document for raid10

2017-11-02T04:32:25+00:00

Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li

md: remove special meaning of ->quiesce(.., 2)

2017-11-02T04:32:20+00:00

The '2' argument means "wake up anything that is waiting". This is an inelegant part of the design and was added to help support management of suspend_lo/suspend_hi setting. Now that suspend_lo/hi is managed in mddev_suspend/resume, that need is gone. These is still a couple of places where we call 'quiesce' with an argument of '2', but they can safely be changed to call ->quiesce(.., 1); ->quiesce(.., 0) which achieve the same result at the small cost of pausing IO briefly. This removes a small "optimization" from suspend_{hi,lo}_store, but it isn't clear that optimization served a useful purpose. The code now is a lot clearer. Suggested-by: Shaohua Li Signed-off-by: NeilBrown Signed-off-by: Shaohua Li

md: rename some drivers/md/ files to have an "md-" prefix

2017-10-17T02:06:36+00:00

Motivated by the desire to illiminate the imprecise nature of DM-specific patches being unnecessarily sent to both the MD maintainer and mailing-list. Which is born out of the fact that DM files also reside in drivers/md/ Now all MD-specific files in drivers/md/ start with either "raid" or "md-" and the MAINTAINERS file has been updated accordingly. Shaohua: don't change module name Signed-off-by: Mike Snitzer Signed-off-by: Shaohua Li