BMC/Intel-BMC/linux.git/drivers/md/dm-integrity.c, branch dev-5.2

dm integrity: fix a crash due to BUG_ON in __journal_read_write()

2019-08-29T06:30:25+00:00

commit 5729b6e5a1bcb0bbc28abe82d749c7392f66d2c7 upstream. Fix a crash that was introduced by the commit 724376a04d1a. The crash is reported here: https://gitlab.com/cryptsetup/cryptsetup/issues/468 When reading from the integrity device, the function dm_integrity_map_continue calls find_journal_node to find out if the location to read is present in the journal. Then, it calculates how many sectors are consecutively stored in the journal. Then, it locks the range with add_new_range and wait_and_add_new_range. The problem is that during wait_and_add_new_range, we hold no locks (we don't hold ic->endio_wait.lock and we don't hold a range lock), so the journal may change arbitrarily while wait_and_add_new_range sleeps. The code then goes to __journal_read_write and hits BUG_ON(journal_entry_get_sector(je) != logical_sector); because the journal has changed. In order to fix this bug, we need to re-check the journal location after wait_and_add_new_range. We restrict the length to one block in order to not complicate the code too much. Fixes: 724376a04d1a ("dm integrity: implement fair range locks") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

2019-05-16T22:55:48+00:00

Pull device mapper updates from Mike Snitzer: - Improve DM snapshot target's scalability by using finer grained locking. Requires some list_bl interface improvements. - Add ability for DM integrity to use a bitmap mode, that tracks regions where data and metadata are out of sync, instead of using a journal. - Improve DM thin provisioning target to not write metadata changes to disk if the thin-pool and associated thin devices are merely activated but not used. This avoids metadata corruption due to concurrent activation of thin devices across different OS instances (e.g. split brain scenarios, which ultimately would be avoided if proper device filters were used -- but not having proper filtering has proven a very common configuration mistake) - Fix missing call to path selector type->end_io in DM multipath. This fixes reported performance problems due to inaccurate path selector IO accounting causing an imbalance of IO (e.g. avoiding issuing IO to particular path due to it seemingly being heavily used). - Fix bug in DM cache metadata's loading of its discard bitset that could lead to all cache blocks being discarded if the very first cache block was discarded (thankfully in practice the first cache block is generally in use; be it FS superblock, partition table, disk label, etc). - Add testing-only DM dust target which simulates a device that has failing sectors and/or read failures. - Fix a DM init error path reference count hang that caused boot hangs if user supplied malformed input on kernel commandline. - Fix a couple issues with DM crypt target's logging being overly verbose or lacking context. - Various other small fixes to DM init, DM multipath, DM zoned, and DM crypt. * tag 'for-5.2/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (42 commits) dm: fix a couple brace coding style issues dm crypt: print device name in integrity error message dm crypt: move detailed message into debug level dm ioctl: fix hang in early create error condition dm integrity: whitespace, coding style and dead code cleanup dm integrity: implement synchronous mode for reboot handling dm integrity: handle machine reboot in bitmap mode dm integrity: add a bitmap mode dm integrity: introduce a function add_new_range_and_wait() dm integrity: allow large ranges to be described dm ingerity: pass size to dm_integrity_alloc_page_list() dm integrity: introduce rw_journal_sectors() dm integrity: update documentation dm integrity: don't report unused options dm integrity: don't check null pointer before kvfree and vfree dm integrity: correctly calculate the size of metadata area dm dust: Make dm_dust_init and dm_dust_exit static dm dust: remove redundant unsigned comparison to less than zero dm mpath: always free attached_handler_name in parse_path() dm init: fix max devices/targets checks ...

dm integrity: whitespace, coding style and dead code cleanup

2019-05-09T20:00:31+00:00

Just some things that stood out like a sore thumb. Also, converted some printk(KERN_CRIT, ...) to DMCRIT(...) Signed-off-by: Mike Snitzer

dm integrity: implement synchronous mode for reboot handling

2019-05-08T17:41:59+00:00

Unfortunatelly, there may be bios coming even after the reboot notifier was called. We don't want these bios to make the bitmap dirty again. To address this, implement a synchronous mode - when a bio is about to be terminated, we clean the bitmap and terminate the bio after the clean operation succeeds. This obviously slows down bio processing, but it makes sure that when all bios are finished, the bitmap will be clean. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer

dm integrity: handle machine reboot in bitmap mode

2019-05-08T17:41:58+00:00

When in bitmap mode the bitmap must be cleared when rebooting. This commit adds the reboot hook. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer

dm integrity: add a bitmap mode

2019-05-08T17:41:58+00:00

Introduce an alternate mode of operation where dm-integrity uses a bitmap instead of a journal. If a bit in the bitmap is 1, the corresponding region's data and integrity tags are not synchronized - if the machine crashes, the unsynchronized regions will be recalculated. The bitmap mode is faster than the journal mode, because we don't have to write the data twice, but it is also less reliable, because if data corruption happens when the machine crashes, it may not be detected. Benchmark results for an SSD connected to a SATA300 port, when doing large linear writes with dd: buffered I/O: raw device throughput - 245MB/s dm-integrity with journaling - 120MB/s dm-integrity with bitmap - 238MB/s direct I/O with 1MB block size: raw device throughput - 248MB/s dm-integrity with journaling - 123MB/s dm-integrity with bitmap - 223MB/s For more info see dm-integrity in Documentation/device-mapper/ Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer

dm integrity: introduce a function add_new_range_and_wait()

2019-05-08T17:40:28+00:00

Introduce a function add_new_range_and_wait() in order to avoid repetitive code. It will be used in the following commit. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer

Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block

2019-05-08T01:14:36+00:00

Pull block updates from Jens Axboe: "Nothing major in this series, just fixes and improvements all over the map. This contains: - Series of fixes for sed-opal (David, Jonas) - Fixes and performance tweaks for BFQ (via Paolo) - Set of fixes for bcache (via Coly) - Set of fixes for md (via Song) - Enabling multi-page for passthrough requests (Ming) - Queue release fix series (Ming) - Device notification improvements (Martin) - Propagate underlying device rotational status in loop (Holger) - Removal of mtip32xx trim support, which has been disabled for years (Christoph) - Improvement and cleanup of nvme command handling (Christoph) - Add block SPDX tags (Christoph) - Cleanup/hardening of bio/bvec iteration (Christoph) - A few NVMe pull requests (Christoph) - Removal of CONFIG_LBDAF (Christoph) - Various little fixes here and there" * tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits) block: fix mismerge in bvec_advance block: don't drain in-progress dispatch in blk_cleanup_queue() blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release blk-mq: always free hctx after request queue is freed blk-mq: split blk_mq_alloc_and_init_hctx into two parts blk-mq: free hw queue's resource in hctx's release handler blk-mq: move cancel of requeue_work into blk_mq_release blk-mq: grab .q_usage_counter when queuing request from plug code path block: fix function name in comment nvmet: protect discovery change log event list iteration nvme: mark nvme_core_init and nvme_core_exit static nvme: move command size checks to the core nvme-fabrics: check more command sizes nvme-pci: check more command sizes nvme-pci: remove an unneeded variable initialization nvme-pci: unquiesce admin queue on shutdown nvme-pci: shutdown on timeout during deletion nvme-pci: fix psdt field for single segment sgls nvme-multipath: don't print ANA group state by default nvme-multipath: split bios with the ns_head bio_set before submitting ...

dm integrity: allow large ranges to be described

2019-05-07T20:05:12+00:00

Change n_sectors data type from unsigned to sector_t. Following commits will need to lock large ranges. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer

dm ingerity: pass size to dm_integrity_alloc_page_list()

2019-05-07T20:05:12+00:00

Pass size to dm_integrity_alloc_page_list(). This is needed so following commits can pass a size that is different from ic->journal_pages. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer