BMC/Intel-BMC/linux.git/drivers/md/bcache/super.c, branch dev-5.7

bcache: check and adjust logical block size for backing devices

2020-06-30T19:36:14+00:00

[ Upstream commit dcacbc1242c71e18fa9d2eadc5647e115c9c627d ] It's possible for a block driver to set logical block size to a value greater than page size incorrectly; e.g. bcache takes the value from the superblock, set by the user w/ make-bcache. This causes a BUG/NULL pointer dereference in the path: __blkdev_get() -> set_init_blocksize() // set i_blkbits based on ... -> bdev_logical_block_size() -> queue_logical_block_size() // ... this value -> bdev_disk_changed() ... -> blkdev_readpage() -> block_read_full_page() -> create_page_buffers() // size = 1 << i_blkbits -> create_empty_buffers() // give size/take pointer -> alloc_page_buffers() // return NULL .. BUG! Because alloc_page_buffers() is called with size > PAGE_SIZE, thus it initializes head = NULL, skips the loop, return head; then create_empty_buffers() gets (and uses) the NULL pointer. This has been around longer than commit ad6bf88a6c19 ("block: fix an integer overflow in logical block size"); however, it increased the range of values that can trigger the issue. Previously only 8k/16k/32k (on x86/4k page size) would do it, as greater values overflow unsigned short to zero, and queue_ logical_block_size() would then use the default of 512. Now the range with unsigned int is much larger, and users w/ the 512k value, which happened to be zero'ed previously and work fine, started to hit this issue -- as the zero is gone, and queue_logical_block_size() does return 512k (>PAGE_SIZE.) Fix this by checking the bcache device's logical block size, and if it's greater than page size, fallback to the backing/ cached device's logical page size. This doesn't affect cache devices as those are still checked for block/page size in read_super(); only the backing/cached devices are not. Apparently it's a regression from commit 2903381fce71 ("bcache: Take data offset from the bdev superblock."), moving the check into BCACHE_SB_VERSION_CDEV only. Now that we have superblocks of backing devices out there with this larger value, we cannot refuse to load them (i.e., have a similar check in _BDEV.) Ideally perhaps bcache should use all values from the backing device (physical/logical/io_min block size)? But for now just fix the problematic case. Test-case: # IMG=/root/disk.img # dd if=/dev/zero of=$IMG bs=1 count=0 seek=1G # DEV=$(losetup --find --show $IMG) # make-bcache --bdev $DEV --block 8k < see dmesg > Before: # uname -r 5.7.0-rc7 [ 55.944046] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 55.949742] CPU: 3 PID: 610 Comm: bcache-register Not tainted 5.7.0-rc7 #4 ... [ 55.952281] RIP: 0010:create_empty_buffers+0x1a/0x100 ... [ 55.966434] Call Trace: [ 55.967021] create_page_buffers+0x48/0x50 [ 55.967834] block_read_full_page+0x49/0x380 [ 55.972181] do_read_cache_page+0x494/0x610 [ 55.974780] read_part_sector+0x2d/0xaa [ 55.975558] read_lba+0x10e/0x1e0 [ 55.977904] efi_partition+0x120/0x5a6 [ 55.980227] blk_add_partitions+0x161/0x390 [ 55.982177] bdev_disk_changed+0x61/0xd0 [ 55.982961] __blkdev_get+0x350/0x490 [ 55.983715] __device_add_disk+0x318/0x480 [ 55.984539] bch_cached_dev_run+0xc5/0x270 [ 55.986010] register_bcache.cold+0x122/0x179 [ 55.987628] kernfs_fop_write+0xbc/0x1a0 [ 55.988416] vfs_write+0xb1/0x1a0 [ 55.989134] ksys_write+0x5a/0xd0 [ 55.989825] do_syscall_64+0x43/0x140 [ 55.990563] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 55.991519] RIP: 0033:0x7f7d60ba3154 ... After: # uname -r 5.7.0.bcachelbspgsz [ 31.672460] bcache: bcache_device_init() bcache0: sb/logical block size (8192) greater than page size (4096) falling back to device logical block size (512) [ 31.675133] bcache: register_bdev() registered backing device loop0 # grep ^ /sys/block/bcache0/queue/*_block_size /sys/block/bcache0/queue/logical_block_size:512 /sys/block/bcache0/queue/physical_block_size:8192 Reported-by: Ryan Finnie Reported-by: Sebastian Marsching Signed-off-by: Mauricio Faria de Oliveira Signed-off-by: Coly Li Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

bcache: fix refcount underflow in bcache_device_free()

2020-06-22T07:32:50+00:00

[ Upstream commit 86da9f736740eba602389908574dfbb0f517baa5 ] The problematic code piece in bcache_device_free() is, 785 static void bcache_device_free(struct bcache_device *d) 786 { 787 struct gendisk *disk = d->disk; [snipped] 799 if (disk) { 800 if (disk->flags & GENHD_FL_UP) 801 del_gendisk(disk); 802 803 if (disk->queue) 804 blk_cleanup_queue(disk->queue); 805 806 ida_simple_remove(&bcache_device_idx, 807 first_minor_to_idx(disk->first_minor)); 808 put_disk(disk); 809 } [snipped] 816 } At line 808, put_disk(disk) may encounter kobject refcount of 'disk' being underflow. Here is how to reproduce the issue, - Attche the backing device to a cache device and do random write to make the cache being dirty. - Stop the bcache device while the cache device has dirty data of the backing device. - Only register the backing device back, NOT register cache device. - The bcache device node /dev/bcache0 won't show up, because backing device waits for the cache device shows up for the missing dirty data. - Now echo 1 into /sys/fs/bcache/pendings_cleanup, to stop the pending backing device. - After the pending backing device stopped, use 'dmesg' to check kernel message, a use-after-free warning from KASA reported the refcount of kobject linked to the 'disk' is underflow. The dropping refcount at line 808 in the above code piece is added by add_disk(d->disk) in bch_cached_dev_run(). But in the above condition the cache device is not registered, bch_cached_dev_run() has no chance to be called and the refcount is not added. The put_disk() for a non- added refcount of gendisk kobject triggers a underflow warning. This patch checks whether GENHD_FL_UP is set in disk->flags, if it is not set then the bcache device was not added, don't call put_disk() and the the underflow issue can be avoided. Signed-off-by: Coly Li Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

block: simplify queue allocation

2020-03-27T16:23:43+00:00

Current make_request based drivers use either blk_alloc_queue_node or blk_alloc_queue to allocate a queue, and then set up the make_request_fn function pointer and a few parameters using the blk_queue_make_request helper. Simplify this by passing the make_request pointer to blk_alloc_queue, and while at it merge the _node variant into the main helper by always passing a node_id, and remove the superfluous gfp_mask parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

bcache: pass the make_request methods to blk_queue_make_request

2020-03-27T16:23:43+00:00

bcache is the only driver not actually passing its make_request methods to blk_queue_make_request, but instead just sets them up manually a little later. Make bcache follow the common way of setting up make_request based queues. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

bcache: Revert "bcache: shrink btree node cache after bch_btree_check()"

2020-02-13T15:53:49+00:00

This reverts commit 1df3877ff6a4810054237c3259d900ded4468969. In my testing, sometimes even all the cached btree nodes are freed, creating gc and allocator kernel threads may still fail. Finally it turns out that kthread_run() may fail if there is pending signal for current task. And the pending signal is sent from OOM killer which is triggered by memory consuption in bch_btree_check(). Therefore explicitly shrinking bcache btree node here does not help, and after the shrinker callback is improved, as well as pending signals are ignored before creating kernel threads, now such operation is unncessary anymore. This patch reverts the commit 1df3877ff6a4 ("bcache: shrink btree node cache after bch_btree_check()") because we have better improvement now. Signed-off-by: Coly Li Signed-off-by: Jens Axboe

bcache: check return value of prio_read()

2020-02-01T14:55:39+00:00

Now if prio_read() failed during starting a cache set, we can print out error message in run_cache_set() and handle the failure properly. Signed-off-by: Coly Li Signed-off-by: Jens Axboe

bcache: use read_cache_page_gfp to read the superblock

2020-01-23T18:40:01+00:00

Avoid a pointless dependency on buffer heads in bcache by simply open coding reading a single page. Also add a SB_OFFSET define for the byte offset of the superblock instead of using magic numbers. Signed-off-by: Christoph Hellwig Signed-off-by: Coly Li Signed-off-by: Jens Axboe

bcache: store a pointer to the on-disk sb in the cache and cached_dev structures

2020-01-23T18:40:01+00:00

This allows to properly build the superblock bio including the offset in the page using the normal bio helpers. This fixes writing the superblock for page sizes larger than 4k where the sb write bio would need an offset in the bio_vec. Signed-off-by: Christoph Hellwig Signed-off-by: Coly Li Signed-off-by: Jens Axboe

bcache: return a pointer to the on-disk sb from read_super

2020-01-23T18:40:01+00:00

Returning the properly typed actual data structure insteaf of the containing struct page will save the callers some work going forward. Signed-off-by: Christoph Hellwig Signed-off-by: Coly Li Signed-off-by: Jens Axboe

bcache: transfer the sb_page reference to register_{bdev,cache}

2020-01-23T18:40:01+00:00

Avoid an extra reference count roundtrip by transferring the sb_page ownership to the lower level register helpers. Signed-off-by: Christoph Hellwig Signed-off-by: Coly Li Signed-off-by: Jens Axboe