BMC/Intel-BMC/linux.git/drivers/iommu/Makefile, branch dev

iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices

2015-05-29T09:12:01+00:00

Version three of the ARM SMMU architecture introduces significant changes and improvements over previous versions of the specification, necessitating a new driver in the Linux kernel. The main change to the programming interface is that the majority of the configuration data has been moved from MMIO registers to in-memory data structures, with communication between the CPU and the SMMU being mediated via in-memory circular queues. This patch adds an initial driver for SMMUv3 to Linux. We currently support pinned stage-1 (DMA) and stage-2 (KVM VFIO) mappings using the generic IO-pgtable code. Cc: Robin Murphy Signed-off-by: Will Deacon Signed-off-by: Joerg Roedel

Merge branches 'arm/renesas', 'arm/smmu', 'arm/omap', 'ppc/pamu', 'x86/amd' and 'core' into next

2015-02-04T15:53:44+00:00

Conflicts: drivers/iommu/Kconfig drivers/iommu/Makefile

iommu: add ARM LPAE page table allocator

2015-01-19T14:46:44+00:00

A number of IOMMUs found in ARM SoCs can walk architecture-compatible page tables. This patch adds a generic allocator for Stage-1 and Stage-2 v7/v8 long-descriptor page tables. 4k, 16k and 64k pages are supported, with up to 4-levels of walk to cover a 48-bit address space. Tested-by: Laurent Pinchart Signed-off-by: Will Deacon

iommu: introduce generic page table allocation framework

2015-01-19T14:46:43+00:00

This patch introduces a generic framework for allocating page tables for an IOMMU. There are a number of reasons we want to do this: - It avoids duplication of complex table management code in IOMMU drivers that use the same page table format - It removes any coupling with the CPU table format (and even the architecture!) - It defines an API for IOMMU TLB maintenance Tested-by: Laurent Pinchart Signed-off-by: Will Deacon

iommu: Allow building iova.c independently

2015-01-19T13:55:22+00:00

In preparation for sharing the IOVA allocator, split it out under its own Kconfig symbol. Signed-off-by: Robin Murphy Signed-off-by: Joerg Roedel

Merge branches 'arm/omap', 'arm/msm', 'arm/rockchip', 'arm/renesas', 'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next

2014-12-02T12:07:13+00:00

Conflicts: drivers/iommu/arm-smmu.c

iommu/rockchip: rk3288 iommu driver

2014-11-03T16:29:09+00:00

The rk3288 has several iommus. Each iommu belongs to a single master device. There is one device (ISP) that has two slave iommus, but that case is not yet supported by this driver. At subsys init, the iommu driver registers itself as the iommu driver for the platform bus. The master devices find their slave iommus using the "iommus" field in their devicetree description. Since each slave iommu belongs to exactly one master, their is no additional data needed at probe to associate a slave with its master. An iommu device's power domain, clock and irq are all shared with its master device, and the master device must be careful to attach from the iommu only after powering and clocking it (and leave it powered and clocked before detaching). Because their is no guarantee what the status of the iommu is at probe, and since the driver does not even know if the device is powered, we delay requesting its irq until the master device attaches, at which point we have a guarantee that the device is powered and clocked and we can reset it and disable its interrupt mask. An iommu_domain describes a virtual iova address space. Each iommu_domain has a corresponding page table that lists the mappings from iova to physical address. For the rk3288 iommu, the page table has two levels: The Level 1 "directory_table" has 1024 4-byte dte entries. Each dte points to a level 2 "page_table". Each level 2 page_table has 1024 4-byte pte entries. Each pte points to a 4 KiB page of memory. An iommu_domain is created when a dma_iommu_mapping is created via arm_iommu_create_mapping. Master devices can then attach themselves to this mapping (or attach the mapping to themselves?) by calling arm_iommu_attach_device(). This in turn instructs the iommu driver to write the page table's physical address into the slave iommu's "Directory Table Entry" (DTE) register. In fact multiple master devices, each with their own slave iommu device, can all attach to the same mapping. The iommus for these devices will share the same iommu_domain and therefore point to the same page table. Thus, the iommu domain maintains a list of iommu devices which are attached. This driver relies on the iommu core to ensure that all devices have detached before destroying a domain. v6: - add .add/remove_device() callbacks. - parse platform_device device tree nodes for "iommus" property - store platform device pointer as group iommudata - Check for existence of iommu group instead of relying on a dev_get_drvdata() to return NULL for a NULL device. v7: - fixup some strings. - In rk_iommu_disable_paging() # and % were reversed. Signed-off-by: Daniel Kurtz Signed-off-by: Simon Xue Reviewed-by: Grant Grundler Reviewed-by: Stéphane Marchesin Tested-by: Heiko Stuebner Signed-off-by: Joerg Roedel

iommu/omap: Consolidate OMAP IOMMU modules

2014-10-23T12:32:25+00:00

The OMAP IOMMU driver was originally designed as modules, and split into a core module and a thin arch-specific module through the OMAP arch-specific struct iommu_functions, to scale for both OMAP1 and OMAP2+ IOMMU variants. The driver can only be built for OMAP2+ platforms currently, and also can only be built-in after the adaptation to generic IOMMU API. The OMAP1 variant was never added and will most probably be never added (the code for the only potential user, its parent, DSP processor has already been cleaned up). So, consolidate the OMAP2 specific omap-iommu2 module into the core OMAP IOMMU driver - this eliminates the arch-specific ops structure and simplifies the driver into a single module that only implements the generic IOMMU API's iommu_ops. The following are the main changes: - omap-iommu2 module is completely eliminated, with the common definitions moved to the internal omap-iommu.h, and the ops implementations moved into omap-iommu.c - OMAP arch-specific struct iommu_functions is also eliminated, with the ops implementations directly absorbed into the calling functions - iotlb_alloc_cr() is no longer inlined and defined only when PREFETCH_IOTLB is defined - iotlb_dump_cr() is similarly defined only when CONFIG_OMAP_IOMMU_DEBUG is defined - Elimination of the OMAP IOMMU exported functions to register the arch ops, omap_install_iommu_arch() & omap_uninstall_iommu_arch() - Any stale comments about OMAP1 are also cleaned up Signed-off-by: Suman Anna Acked-by: Laurent Pinchart Signed-off-by: Joerg Roedel

Merge branches 'x86/vt-d', 'x86/amd', 'arm/omap', 'ppc/pamu', 'arm/smmu', 'arm/exynos' and 'core' into next

2014-07-31T18:29:02+00:00

iommu/omap: Remove virtual memory manager

2014-07-29T10:38:07+00:00

The OMAP3 ISP driver was the only user of the OMAP IOVMM API. Now that is has been ported to the DMA API, remove the unused virtual memory manager. Signed-off-by: Laurent Pinchart Signed-off-by: Joerg Roedel