BMC/Intel-BMC/linux.git/drivers/interconnect/qcom, branch dev-5.10-intel

interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes

2021-08-12T11:22:18+00:00

commit ce5a595744126be4f1327e29e3c5ae9aac6b38d5 upstream. We currently only enforce BW floors for a subset of nodes in a path. All BCMs that need updating are queued in the pre_aggregate/aggregate phase. The first set() commits all queued BCMs and subsequent set() calls short-circuit without committing anything. Since the floor BW isn't set in sum_avg/max_peak until set(), then some BCMs are committed before their associated nodes reflect the floor. Set the floor as each node is being aggregated. This ensures that all all relevant floors are set before the BCMs are committed. Fixes: 266cd33b5913 ("interconnect: qcom: Ensure that the floor bandwidth value is enforced") Signed-off-by: Mike Tipton Link: https://lore.kernel.org/r/20210721175432.2119-4-mdtipton@codeaurora.org [georgi: Removed unused variable] Signed-off-by: Georgi Djakov Signed-off-by: Greg Kroah-Hartman

interconnect: qcom: Add missing MODULE_DEVICE_TABLE

2021-06-03T07:00:46+00:00

[ Upstream commit 1fd86e280d8b21762901e43d42d66dbfe8b8e0d3 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot Signed-off-by: Zou Wei Link: https://lore.kernel.org/r/1620704673-104205-1-git-send-email-zou_wei@huawei.com Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov Signed-off-by: Sasha Levin

interconnect: qcom: bcm-voter: add a missing of_node_put()

2021-06-03T07:00:45+00:00

[ Upstream commit a00593737f8bac2c9e97b696e7ff84a4446653e8 ] Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak. Signed-off-by: Subbaraman Narayanamurthy Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/1619116570-13308-1-git-send-email-subbaram@codeaurora.org Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov Signed-off-by: Sasha Levin

interconnect: qcom: fix rpmh link failures

2021-01-17T13:17:01+00:00

commit 512d4a26abdbd11c6ffa03032740e5ab3c62c55b upstream. When CONFIG_COMPILE_TEST is set, it is possible to build some of the interconnect drivers into the kernel while their dependencies are loadable modules, which is bad: arm-linux-gnueabi-ld: drivers/interconnect/qcom/bcm-voter.o: in function `qcom_icc_bcm_voter_commit': (.text+0x1f8): undefined reference to `rpmh_invalidate' arm-linux-gnueabi-ld: (.text+0x20c): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: (.text+0x2b0): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: (.text+0x2e8): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: drivers/interconnect/qcom/icc-rpmh.o: in function `qcom_icc_bcm_init': (.text+0x2ac): undefined reference to `cmd_db_read_addr' arm-linux-gnueabi-ld: (.text+0x2c8): undefined reference to `cmd_db_read_aux_data' The exact dependencies are a bit complicated, so split them out into a hidden Kconfig symbol that all drivers can in turn depend on to get it right. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Arnd Bergmann Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20201204165030.3747484-1-arnd@kernel.org Signed-off-by: Georgi Djakov Signed-off-by: Greg Kroah-Hartman

interconnect: qcom: qcs404: Remove GPU and display RPM IDs

2020-11-20T13:52:05+00:00

The following errors are noticed during boot on a QCS404 board: [ 2.926647] qcom_icc_rpm_smd_send mas 6 error -6 [ 2.934573] qcom_icc_rpm_smd_send mas 8 error -6 These errors show when we try to configure the GPU and display nodes. Since these particular nodes aren't supported on RPM and are purely local, we should just change their mas_rpm_id to -1 to avoid any requests being sent for these master IDs. Reviewed-by: Mike Tipton Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20201118111044.26056-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov

interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes

2020-11-20T13:51:51+00:00

Some nodes are incorrectly marked as RPM-controlled (they have RPM master and slave ids assigned), but are actually controlled by the application CPU instead. The RPM complains when we send requests for resources that it can't control. Let's fix this by replacing the IDs, with the default "-1" in which case no requests are sent. Reviewed-by: Mike Tipton Link: https://lore.kernel.org/r/20201112105140.10092-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov

interconnect: qcom: msm8974: Don't boost the NoC rate during boot

2020-11-17T22:21:47+00:00

It has been reported that on Fairphone 2 (msm8974-based), increasing the clock rate for some of the NoCs during boot may lead to hangs. Let's restore the original behavior and not touch the clock rate of any of the NoCs to fix the regression. Reported-by: Luca Weiss Tested-by: Luca Weiss Fixes: b1d681d8d324 ("interconnect: Add sync state support") Link: https://lore.kernel.org/r/20201109124512.10776-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov

interconnect: qcom: msm8974: Prevent integer overflow in rate

2020-11-17T22:18:05+00:00

When sync_state support got introduced recently, by default we try to set the NoCs to run initially at maximum rate. But as these values are aggregated, we may end with a really big clock rate value, which is then converted from "u64" to "long" during the clock rate rounding. But on 32bit platforms this may result an overflow. Fix it by making sure that the rate is within range. Reported-by: Luca Weiss Reviewed-by: Brian Masney Link: https://lore.kernel.org/r/20201106144847.7726-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov

interconnect: qcom: use icc_sync state for sm8[12]50

2020-10-27T14:01:22+00:00

In addition to the rest of Qcom interconnect drivers use icc_sync_state for SM8150/SM8250 interconnect drivers to notify the interconnect framework when all consumers are probed and there is no need to keep the bandwidth set to maximum anymore. Also move the BCM initialization before creating the nodes to set the max bandwidth in hardware for the initialization/probing stage. Signed-off-by: Dmitry Baryshkov Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Link: https://lore.kernel.org/r/20201027133418.976687-1-dmitry.baryshkov@linaro.org Signed-off-by: Georgi Djakov

interconnect: qcom: Ensure that the floor bandwidth value is enforced

2020-10-22T10:26:26+00:00

Take into account the initial bandwidth from the framework and update the internal sum and max values before committing if needed. This will ensure that the floor bandwidth values are enforced until the providers get into sync state. Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Tested-by: Akash Asthana Link: https://lore.kernel.org/r/20201021155938.9223-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov